How to work offical smart card?
cksamurai 5 okt 2008
Can someone explain to me the correct procedure to setting up a dm500c using an official smart card.
I have seen it running on another dm500c with Default Soft Cam : mgcamd or newcs & Cardserver : cardserver working together in the softcam setup menu.
If i insert my own smart card in the box the channel goes blank if i put in the other smard card the channel shows again.
Do i have to edit a config file or some thing to get my own card working, both cards are used for the same subcription channels and
they have Nagravision printed on the back. Help me out someone, any suggestions are appreciated.
I have seen it running on another dm500c with Default Soft Cam : mgcamd or newcs & Cardserver : cardserver working together in the softcam setup menu.
If i insert my own smart card in the box the channel goes blank if i put in the other smard card the channel shows again.
Do i have to edit a config file or some thing to get my own card working, both cards are used for the same subcription channels and
they have Nagravision printed on the back. Help me out someone, any suggestions are appreciated.
cksamurai 5 okt 2008
my card worked before, the problem was that i had done a flash on the dm500 hence lossing all settings that made the card to work.
dAF2000 5 okt 2008
You will only loose the settings if you do a flash erase or factory reset.my card worked before, the problem was that i had done a flash on the dm500 hence lossing all settings that made the card to work.