Forums

Today the OpenPLi 7.3 release version is finally available to the users.

Models that now work with the OpenPLi 7.2 release will be automatically upgraded to the 7.3 version with a software update. It is not unwise to always have a good backup available so in case you experience issues you will quickly have a working configuration if you have performed an online flash and restored the last working backup.

 

The 7.3 release candidate, including the plugin feeds, are already removed from our download servers.

 

The releasenotes are online.

531 files in upgrade now... ;-)

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

I did upgrade from 7.2 on Duo4k, box booted fine. Softcam startup didnt change. I noticed new plugin for Oscam.

Udpxy port changed back to default, had to edit it again. Havent noticed anything else, yet.

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.

Go to menu -> Setup -> System -> Expert settings - Display setup  select standby en move the bar to the right.

I did an usb flash but the sf8008 always stuck at boot.
Same when installing the multiboot build from recovery's usb multiboot upgrade.
The slot that contain pli 7.3 always stuck at bootlogo, other slots are booting.
Edited by Kaizoku, 15 July 2020 - 12:27.

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

If you have loaded both CCcam and Oscam the default cam after startup is indeed CCcam. This is known.

Just change it manually to Oscam.

@Kaizoku

 

I just flashed the sf8008 and can confirm that something goes wrong. The reason will have to be investigated. It might be that the latest changes in the BSP might have caused this.

I still had a 7.3.RC in slot 1 and this works Ok.

Thanks for confirmation Frenske.

My display no longer shows time, just channel number.
Only when I put my receiver (Zgemma H7S) into standby is the time shown.

Go to menu -> Setup -> System -> Expert settings - Display setup select standby en move the bar to the right.

Thanks but it didn't help. The setting only changes the display brightness. I restarted enigma2 but still the same. It's not a skin issue because I changed it but still just get the channel number when the receiver is on.

No problem with the online update from 7.2 to 7.3 in Uno 4K Se and Duo 4K.

 

Tanks OPLI.

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

 

Then you have installed them both (why?), and C comes before O.

I did an usb flash but the sf8008 always stuck at boot.
Same when installing the multiboot build from recovery's usb multiboot upgrade.
The slot that contain pli 7.3 always stuck at bootlogo, other slots are booting.

 

For the Octagon SF8008 and SF8008 mini, Gigablue Trio 4K and uClan Usystm:

 

These boxes have and old and a new multiboot partition format. These are not compatible. Which format you have depends on which image you have flashed.

 

So, if you have flashed OpenPLi 7.2 (old format), 7.3 in multiboot will not boot, and neither will the latest ATV etc. If you have flashed the latest ATV (new format), OpenPLi 7.2 in multiboot will not boot. And so on...

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.

It is right. For time you have watch on hand or wall... Box should display channel number when is not in standby. If you want change it, change

"Number" to "Clock" in /usr/share/enigma2/display/skin_default/skin_display.xml

 

 

Or you can put one of this uploaded files (depending on which skin you use) to /etc/enigma2/ and restart GUI.

 

 

For different skin name you can rename it to skin_user_usedskinname.xml, where usedskinname is name of your skin.

Edited by ims, 15 July 2020 - 16:47.

I did flash the final 7.3 release by usb and get stuck at splashcreen and boot in the front display.
I did not install any old multiboot image.

The same problem did occurs to atv team with their 11-07 build of 6.5 image... and captain said this: "i build later a new image i have revert the change this broke load kernel modules"

https://www.opena.tv...html#post445715

It is right. For time you have watch on hand or wall... Box should display channel number when is not in standby. If you want change it, change

"Number" to "Clock" in /usr/share/enigma2/display/skin_default/skin_display.xml

 

This certainly wasn't the case in previous openpli images.

If I remember correctly, when the box was ON, time and channel number would alternate from time to time.

I prefer this behaviour than fixed channel number when the box is ON.

There is no reference to what was reverted by Captain, and nothing in the repo commits too...

 

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

 

Then you have installed them both (why?), and C comes before O.

 

But default cam before update should be the same after in my opinion.

Technically not possible at the moment, E2 is designed for one softcam.