Streamproxy transcoding problem on Vuplus...
sherere 24 Sep 2020
Hi guys!
I read a lot in forums about streamproxy, but cant identify a solution to my case....
Stream is working perfectly but i cant transcode.
My streamproxy.conf
root@vuduo2:~# cat /etc/enigma2/streamproxy.conf listen = 8002:transcode listen = 8003:transcode size = 720p bitrate = 3000 profile = baseline level = 3.1 bframes = 0
I have stopped streamproxy by doing /etc/init.d/streamproxy.sh stop
Then i started streamproxy with -f and try to transcoding via VLC on Windows 10, logs bellow:
root@vuduo2:~# streamproxy -f Checking manufacturer/model: VU+/SoloSE Checking id: /proc/stb/info/model = dm8000 Checking id: /proc/stb/info/vumodel = solose Checking manufacturer/model: VU+/Solo2 Checking id: /proc/stb/info/model = dm8000 Checking id: /proc/stb/info/vumodel = solo2 Checking manufacturer/model: VU+/Duo2 Checking id: /proc/stb/info/model = dm8000 Checking id: /proc/stb/info/vumodel = duo2 model identified as: VU+ Duo2 (bcm7424) streamproxy: config_map: audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ//0 streamproxy: config_map: auth = true/1 streamproxy: config_map: bframes = 0/0 streamproxy: config_map: bitrate = 3000/3000 streamproxy: config_map: foreground = true/1 streamproxy: config_map: group = /0 streamproxy: config_map: level = 3.1/3 streamproxy: config_map: listen:8002 = 1/1 streamproxy: config_map: listen:8003 = 1/1 streamproxy: config_map: profile = baseline/0 streamproxy: config_map: size = 720p/720 streamproxy: config_map: webifport = 5080/5080 streamproxy: accept new connection on port 8002, default action: transcode, fd 6 ClientSocket: authentication: *****,***** ClientSocket: header[accept]: "*/*" ClientSocket: header[accept-language]: "pt_BR" ClientSocket: header[authorization]: "Basic cm9vdDpoMzBqZGp0aA==" ClientSocket: header[host]: "fakeurl.myddns.me:8002" ClientSocket: header[range]: "bytes=0-" ClientSocket: header[user-agent]: "VLC/3.0.11 LibVLC/3.0.11" ClientSocket: url: /1:0:19:27E:2A:8:FFFF0000:0:0:0: clientsocket: streaming parameters before defaults from config: http_range = 0- clientsocket: reject config default audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ/ clientsocket: reject config default auth = true clientsocket: accept config default bframes = 0 clientsocket: accept config default bitrate = 3000 clientsocket: reject config default foreground = true clientsocket: reject config default group = clientsocket: accept config default level = 3.1 clientsocket: reject config default listen:8002 = 1 clientsocket: reject config default listen:8003 = 1 clientsocket: accept config default profile = baseline clientsocket: accept config default size = 720p clientsocket: reject config default webifport = 5080 clientsocket: streaming parameters after defaults: bframes = 0 bitrate = 3000 http_range = 0- level = 3.1 profile = baseline size = 720p clientsocket: streaming parameters after url params: bframes = 0 bitrate = 3000 http_range = 0- level = 3.1 profile = baseline size = 720p clientsocket: reject default bitrate, it is already set to 3000 clientsocket: reject default size, it is already set to 720p clientsocket: reject default profile, it is already set to baseline clientsocket: reject default level, it is already set to 3.1 clientsocket: reject default bframes, it is already set to 0 clientsocket: accept default framerate = 30000 clientsocket: streaming parameters after setting default params: bframes = 0 bitrate = 3000 framerate = 30000 http_range = 0- level = 3.1 profile = baseline size = 720p Service: create service: 1:0:19:27E:2A:8:FFFF0000:0:0:0: ClientSocket: default live request ClientSocket: default live transcoding request ClientSocket: transcoding service broadcom LiveTranscodingBroadcom: 1:0:19:27E:2A:8:FFFF0000:0:0:0 WebifRequest: send request to webif: "GET /web/stream?StreamService=1:0:19:27E:2A:8:FFFF0000:0:0:0 HTTP/1.0 " ClientSocket: http_trap: LiveTranscodingBroadcom: tuning request to enigma failed (webif timeout) (std::exception) (404: HTTP/1.1 404 Not found, cannot tune to service@Content-Type: text/html@Connection: close@Accept-Ranges: bytes@@) streamproxy: pid 8968 exited streamproxy: accept new connection on port 8002, default action: transcode, fd 6 ClientSocket: authentication: *****,***** ClientSocket: header[authorization]: "Basic cm9vdDpoMzBqZGp0aA==" ClientSocket: header[host]: "fakeurl.myddns.me:8002" ClientSocket: header[icy-metadata]: "1" ClientSocket: header[user-agent]: "VLC/3.0.11 LibVLC/3.0.11" ClientSocket: url: /1:0:19:27E:2A:8:FFFF0000:0:0:0: clientsocket: streaming parameters before defaults from config: clientsocket: reject config default audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ/ clientsocket: reject config default auth = true clientsocket: accept config default bframes = 0 clientsocket: accept config default bitrate = 3000 clientsocket: reject config default foreground = true clientsocket: reject config default group = clientsocket: accept config default level = 3.1 clientsocket: reject config default listen:8002 = 1 clientsocket: reject config default listen:8003 = 1 clientsocket: accept config default profile = baseline clientsocket: accept config default size = 720p clientsocket: reject config default webifport = 5080 clientsocket: streaming parameters after defaults: bframes = 0 bitrate = 3000 level = 3.1 profile = baseline size = 720p clientsocket: streaming parameters after url params: bframes = 0 bitrate = 3000 level = 3.1 profile = baseline size = 720p clientsocket: reject default bitrate, it is already set to 3000 clientsocket: reject default size, it is already set to 720p clientsocket: reject default profile, it is already set to baseline clientsocket: reject default level, it is already set to 3.1 clientsocket: reject default bframes, it is already set to 0 clientsocket: accept default framerate = 30000 clientsocket: streaming parameters after setting default params: bframes = 0 bitrate = 3000 framerate = 30000 level = 3.1 profile = baseline size = 720p Service: create service: 1:0:19:27E:2A:8:FFFF0000:0:0:0: ClientSocket: default live request ClientSocket: default live transcoding request ClientSocket: transcoding service broadcom LiveTranscodingBroadcom: 1:0:19:27E:2A:8:FFFF0000:0:0:0 WebifRequest: send request to webif: "GET /web/stream?StreamService=1:0:19:27E:2A:8:FFFF0000:0:0:0 HTTP/1.0 " ClientSocket: http_trap: LiveTranscodingBroadcom: tuning request to enigma failed (webif timeout) (std::exception) (404: HTTP/1.1 404 Not found, cannot tune to service@Content-Type: text/html@Connection: close@Accept-Ranges: bytes@@) streamproxy: pid 8969 exited
Its look like streamproxy cant tune enigma into the right channel...
Can any one help me?? Thanks!
sherere 25 Sep 2020
Openpli infos:
Software Sistema OE: PLi-OE Versão do Firmware: OpenPLi 7.3-release (2020-08-29-release-7.3) Kernel / Drivers: 3.13.5 / 20190429anudanan 25 Sep 2020
There is a communication problem from streamproxy to openwebif to tune the requested channel.
Is openwebif running on your box?
Or is there a compatibility problem between current streamproxy and current openwebif to use GET /web/stream without authentication from 127.0.0.1?
Edited by anudanan, 25 September 2020 - 07:17.
WanWizard 25 Sep 2020
ClientSocket: header[host]: "fakeurl.myddns.me:8002"
Connection doesn't seem to be from the local LAN...
sherere 1 Oct 2020
The fakeurl was edited by me....
sherere 1 Oct 2020
There is a communication problem from streamproxy to openwebif to tune the requested channel.
Is openwebif running on your box?
Or is there a compatibility problem between current streamproxy and current openwebif to use GET /web/stream without authentication from 127.0.0.1?
Yes, webif running ok
About a possible compatibility problem, i dont know how to solve It...
Can u give me some directions?
anudanan 1 Oct 2020
I don´t know how to solve it. I think Erik Slagter is the right person to helb
teo1966 1 Oct 2020
You can't try this to set on
sherere 2 Oct 2020
Have you in your openwef settings access from vpn on or off
You can't try this to set on
Cant find vpn settings on open webif via browser. There is a config file?
In time, i try to transcode recorded movies and it worked.... But cant transcode Channels
sherere 4 Oct 2020
menu / applicaties / openwebif / vpn on
hmmmm on openpli menu? Like menu > plugins > openwebif?
cant find VPN settings there...
thanks!!
Edited by sherere, 4 October 2020 - 23:55.
sherere 5 Oct 2020
i think this one desativar acesso remoto ac utilizador root
Lol, thanks teo1966, and yeap is this one, when i deactivated the VPN line appears, im doing tests right now...
But im testing after a fresh firmware install
Edited by sherere, 5 October 2020 - 19:22.