Jump to content


Photo

Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner


  • Please log in to reply
14 replies to this topic

#1 Dimitrij

  • PLi® Core member
  • 9,967 posts

+335
Excellent

Posted 18 February 2021 - 17:02

Checked on the image OpenPLi 8.0(VU+solo4K/Zgemma H9 twin).

 

1)Blindscan OK(tested 13E)

2)Recording OK(two recordings HD services from two tuners simultaneously)

3)Multistream DVB-S2X OK(tested 4.8E)

4)Unicable LNB OK(tested Inverto IDLB-QUDL43-UNE1L-OPP)

5)Stream OK

6)Rotor OK(tested Stab HH 100)

7)PiP OK

 

So far there is a problem with automatic detection of the second tuner, but the manufacturer(Sundtek) promises to fix it in new drivers.


GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #2 el bandido

  • Senior Member
  • 360 posts

+13
Neutral

Posted 20 February 2021 - 16:03

Is C band blindscan supported?
What are the lower and upper symbol rates for this tuner? I cannot find any specifications for it.
 

Thanks.



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #3 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 20 February 2021 - 16:56

 

So far there is a problem with automatic detection of the second tuner, but the manufacturer(Sundtek) promises to fix it in new drivers.

 

sorry it was updated for a long time already but I didn't have time to look it up. The Controlcenter needs an update for the dual tuners

[SERIALNUMBER/1] (slash 1) will address the second tuner in the configurationfile

 

[SERIALNUMBER/1]

dreambox_support_fe1=on

 

this will automatically register the second tuner.

So the update is needed in the controlcenter now.



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #4 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 20 February 2021 - 17:05

Is C band blindscan supported?
What are the lower and upper symbol rates for this tuner? I cannot find any specifications for it.
 

Thanks.

 

Blindscan is supported with all satellites (in the driver, it works with some enigma2 flavours Dimitrij for sure knows more about that)

Symbolrates are supported from 1Msps up to 45 Msps.


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #5 Dimitrij

  • PLi® Core member
  • 9,967 posts

+335
Excellent

Posted 20 February 2021 - 18:25

For blindscan DVB-S need use blindscan plugin for all based openPli/O-E images.

For blindscan DVB-T/C need use standard scan for all based openPli/O-E images.


GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #6 Dimitrij

  • PLi® Core member
  • 9,967 posts

+335
Excellent

Posted 21 February 2021 - 12:06

 

 

So far there is a problem with automatic detection of the second tuner, but the manufacturer(Sundtek) promises to fix it in new drivers.

 

sorry it was updated for a long time already but I didn't have time to look it up. The Controlcenter needs an update for the dual tuners

[SERIALNUMBER/1] (slash 1) will address the second tuner in the configurationfile

 

[SERIALNUMBER/1]

dreambox_support_fe1=on

 

this will automatically register the second tuner.

So the update is needed in the controlcenter now.

 

Sorry, this not work:


openpli develop vusolo4k

vusolo4k login: root
Last login: Sun Feb 21 13:03:10 EET 2021 on pts/0
root@vusolo4k:~# /opt/bin/mediaclient --build
Build date: 2021-02-14 03:28:50
root@vusolo4k:~# cat /etc/sundtek.conf
# sundtek configuration file - /etc/sundtek.conf
# created / modified: фев 21 2021, 12:55h by sundtekcontrolcenter 20210221-2

loglevel = off
autoupdate = off
dmhwpidfilter = off
vtuner_acceleration = off
enablenetwork = off

###### configuration stick 0
[U150511201402]
initial_dvb_mode=DVBT
dreambox_support_fe1=on

###### configuration stick 1
[U201009191237/1]
initial_dvb_mode=DVBS/S2
dreambox_support_fe1=on

root@vusolo4k:~# /usr/sundtek/sun_dvb.sh info
--------------------------------------
DVB Tuner info
--------------------------------------
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-1.2
  [SERIAL]:
     ID: U150511201402
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [             Dual S2]  DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 3-1.4
  [SERIAL]:
     ID: U201009191237
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter3/frontend0
     DVR: /dev/dvb/adapter3/dvr0
     DMX: /dev/dvb/adapter3/demux0

NIM Socket 0:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 0
NIM Socket 1:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 1
NIM Socket 2:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 2
NIM Socket 3:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 3
NIM Socket 4:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 4
NIM Socket 5:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 5
NIM Socket 6:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 6
NIM Socket 7:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 7
NIM Socket 8:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 8
        I2C_Device: 4
NIM Socket 9:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 9
        I2C_Device: 4

NIM Socket 10:
        Type: DVB-T
        Name: Sundtek DVB-T (III) (1/0) (USB):VTUNER
        Frontend_Device: 10
NIM Socket 11:
        Type: DVB-S2
        Name: Sundtek DVB-S/S2 (VIII) (3/0) (USB):VTUNER
        Frontend_Device: 11root@vusolo4k:~#



Edited by Dimitrij, 21 February 2021 - 12:07.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #7 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 21 February 2021 - 16:07

You also need:

[U201009191237]
dreambox_support_fe1=on

 

this will be Tuner 0 (the connector opposite of the power supply) initial_dvb_mode is not needed for DVB-S/S2


Edited by sundtek, 21 February 2021 - 16:08.


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #8 el bandido

  • Senior Member
  • 360 posts

+13
Neutral

Posted 21 February 2021 - 17:32

I could use a good usb tuner, and this model looks very nice.
The 1Msps to 45 Msps is a bit disappointing because we have transponders above  45 Msps now.
If the blindscan feature has not been improved over previous models, then blindscan in this tuner will not be any good for North America.



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #9 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 21 February 2021 - 17:37

I could use a good usb tuner, and this model looks very nice.
The 1Msps to 45 Msps is a bit disappointing because we have transponders above  45 Msps now.
If the blindscan feature has not been improved over previous models, then blindscan in this tuner will not be any good for North America.

 

Can you give me an example for a transponder which requires support for a higher symbolrate?

I think the backcalculation to c-band is not implemented in the previous blindscan and that's your problem no?



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #10 Dimitrij

  • PLi® Core member
  • 9,967 posts

+335
Excellent

Posted 21 February 2021 - 18:14

You also need:

[U201009191237]
dreambox_support_fe1=on

 

this will be Tuner 0 (the connector opposite of the power supply) initial_dvb_mode is not needed for DVB-S/S2

Ok.Done.

Version "20210221-2" add support automatic detection second tuner


GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #11 el bandido

  • Senior Member
  • 360 posts

+13
Neutral

Posted 21 February 2021 - 19:33

 

I could use a good usb tuner, and this model looks very nice.
The 1Msps to 45 Msps is a bit disappointing because we have transponders above  45 Msps now.
If the blindscan feature has not been improved over previous models, then blindscan in this tuner will not be any good for North America.

 

Can you give me an example for a transponder which requires support for a higher symbolrate?

I think the backcalculation to c-band is not implemented in the previous blindscan and that's your problem no?

 

67w ku currently has 3 transponders with a 49000 symbol rate. I will not be able to get those transponders with your new tuner.
Blindscan performed poorly here on ku band with your previous models. So the c band backcalculation was not the problem. I have a 3.6 meter Prodelin dish for c band and 2.4 meter Prodelin dish for the ku band. Blindscan is a feature that I need to find feeds and new channels.

Attached Files



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #12 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 21 February 2021 - 19:45

I'll ask the engineer next week, according to the driver I see almost 60msps but we cannot test that our signal generator only supports up to 45msps.

But I see other issues there, the TS multiplexer is only tested up to 110-120mhz (which is already pretty good). Hardware Filters are available though.



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #13 el bandido

  • Senior Member
  • 360 posts

+13
Neutral

Posted 21 February 2021 - 20:37

I am thinking pretty much any DVB-S2X capable tuner will go up to 60msps. I am very interested in this dual tuner, but if it cannot do what I need it to do, then there is no reason to purchase it.

Thanks.



Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #14 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 2 March 2021 - 21:11

Does this tuner work on kernel/driver level or on application (emulation) level, like earlier Sundtek tuners?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Sundtek SkyTV Ultimate Dual (2x DVB-S2X) USB tuner #15 sundtek

  • Senior Member
  • 169 posts

+8
Neutral

Posted 6 March 2021 - 05:19

Does this tuner work on kernel/driver level or on application (emulation) level, like earlier Sundtek tuners?

 

It uses the same infrastructure as the previous tuners. It's not much of an emulation the data is read via the linux USB interface - decapsulated and directly forwarded to the settopbox tuner interface.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users