Springen naar inhoud


Foto

Pulse 4K HDMI-CEC


  • Please log in to reply
Er zijn 88 reacties in dit onderwerp

#1 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 24 februari 2022 - 20:28

The volume on the tv with the HDMI CEC does not work with the (Advance on the volume buttons) configured, using the tv command or the Box does not respond when changing channels and increasing the volume, I had an Octagon SF8008 and everything worked out, ,Happens with 8.1 or 8.1 openpli-python3-pulse4k

 

Please Help

Thanks



Re: Pulse 4K HDMI-CEC #2 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 24 februari 2022 - 20:38

AFAIK HDMI-CEC works or doesn‘t work. Where one box works ok another box from a different brand doesn‘t work at all.

The same goes for the TV brands. Where one brand works ok, another brand from the same A segment doesn‘t work.

As I was about to buy a new OLED TV I brought my Ultimo 4K just to test whether the combination worked. I definitely need that the TV shuts down when I put my box in stand-by. 


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: Pulse 4K HDMI-CEC #3 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 24 februari 2022 - 21:10

Thanks for the answer, in the function off and on the TV it works, in the option to change channel with the tv command and it is possible to adjust the tv volume with the 4K pulse command and that does not work, this cannot be fixed in the image / drivers ?



Re: Pulse 4K HDMI-CEC #4 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 24 februari 2022 - 21:32

I've never managed to get the volume keys to work with my Panasonic Viera, no matter which box is connected. All other CEC functionality works fine.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Pulse 4K HDMI-CEC #5 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 24 februari 2022 - 21:58

With my Xiaomi TV Q1 75" with the Octagon sf8008 and with Onkyo AV TX-333 it always worked well without any kind of problems



Re: Pulse 4K HDMI-CEC #6 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 24 februari 2022 - 22:22

Every manufacturer is free to decide whether or not to implement CEC, and what functions of CEC. And the CEC specs are so simple that incompatibilities can easily occur.

 

Like Frenske wrote, either your combination of devices work, or they don't.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Pulse 4K HDMI-CEC #7 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 25 februari 2022 - 14:29

You give the answer in your question:  Onkyo AV TX-333  is between the box and the TV.

The option to pass the volume control through HDMI-CEC is working if you have an amplifier between the receiver and the TV because the command sent are properly handled by the amplifier.

 

Very few TVs can understand those code and handle properly the volume control from the receiver.

 

Also you should not be fooled by the RCU, because some brand like VU+ offers a "small universal RCU" once you configure your TV code in the RCU you can turn the TV on/off from the VU+ RCU (without using HDMI-CEC) but the RCU also change the Volume+ / Volume- with the TV code and no longer the STB code (so once again nothing to do with the HDMI-CEC), so when adjusting the volume you think it goes from the VU+ to the TV but in fact it's not, the RCU send directly the TV RCU code for the audio volume.

 

If you test a direct connection between your TV and the SF8008 I am not convince that volume control will still work.


Veranderd door Pr2, 25 februari 2022 - 14:29

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pulse 4K HDMI-CEC #8 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 25 februari 2022 - 16:39

I've already tested it without Onkyo, that is, directly connected to the hdmi 2 port (cec) and it doesn't work anyway, with the octagon sf8008 everything works perfectly, with or without Onkyo, and that's what is bothering me a lot, the keys of volume just doesn't work, but the keys on the middle wheel that supposedly when we click to the right increases the channel, in the octagon it works here in Pulse 4K shows the skin



Re: Pulse 4K HDMI-CEC #9 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 25 februari 2022 - 17:15

What do you mean with "shows the skin"? And which keys exactly? And do those keys behave the same on the box itself?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Pulse 4K HDMI-CEC #10 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 25 februari 2022 - 17:51

The keys on the Pulse remote do not match the ones on the TV remote, the buttons on the central wheel of the remote (central button (OK) plus the one on the left, right up and down) on the TV remote all do the same, show the same if you press the central button ( OK ) of the box command, that is, the EPG

 

 

Bijgevoegde Bestanden

  • Bijlage  xiaomi.jpg   137,8K   2 Aantal bijlagen
  • Bijlage  rc.png   68,85K   1 Aantal bijlagen
  • Bijlage  xiaomi2.jpg   116,27K   1 Aantal bijlagen


Re: Pulse 4K HDMI-CEC #11 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 25 februari 2022 - 19:29

If all the key are transferred to the TV then you can no longer control your STB ok button should not be the same as the one from your TV and opposite is true too.
So when enabling the control STB with the TV remote don't expect every key to be mapped.
I have the same with my Sony TV I can control the STB from the Sony RCU but only a few keys are mapped.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pulse 4K HDMI-CEC #12 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 25 februari 2022 - 22:21

Yes, I would like to have the volume and channel change keys available



Re: Pulse 4K HDMI-CEC #13 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 27 februari 2022 - 16:01

Any news about this subject? One of the problems could not be a bad Keymap.xml ?



Re: Pulse 4K HDMI-CEC #14 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 27 februari 2022 - 17:51

I don' think that we can do anything about this.

 

I have tested my PULSe 4K on a few years old Sony Android TV by enabling use TV RCU to control STB in HDMI-CEC setup screen.

Result is:

- OK button on TV RCU is interpreted as Menu by the PULSe 4K

- Arrows keys around TV RCU are all interpreted as OK by the PULSe 4K

 

For the HDMI-CEC switch TV to correct entry it only works after 45 seconds in the PULSe 4K with this TV.

 

I also try to enable use TV RCU on the VU+ Duo 4K attached to the same TV and with it nothing is working.

 

So HDMI-CEC is not really a standard like you can expect to be.

 

But if developers explain how to debug to try to improve the mapping (if it is possible) I can perform some more testing and take some traces.

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pulse 4K HDMI-CEC #15 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 27 februari 2022 - 18:13

You can install the HDMI test plugin, which shows you the HDMI command being send and received.

 

I doubt the mapping is the problem, but the codes received...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Pulse 4K HDMI-CEC #16 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 27 februari 2022 - 18:58

So:

Right arrow:  Rx: 44 00 00 00 00 -> 45 -> 90 00 (On) -> 8F

Up arrow: Rx: 44 00 -> 45 -> 90 00 (On)

Left arrow: Rx: 44 00 00 00 -> 45 -> 90 00 (On)

Down arrow: Rx: 44 00 00 -> 45 -> 90 00 (On)

 

Back or Exit: 44 00 00 00 00 00 00 00 00 00 00 00 00 00 (remark 13 * 00) -> 45 -> 90 00 (On)

 

All colors buttons + Guide + All movie action button (play pause stop fast fwd, fast bckw):

Rx: 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (15 * 00) -> 45 -> 90 00 (On)

 

In the TX all I have is 8F (0x0)


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pulse 4K HDMI-CEC #17 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 27 februari 2022 - 19:16

Enigma in Debug mode:

[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05 00 00 00
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /media/hdd// statfs failed: No such file or directory
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[Screen] Showing screen 'InfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[eHdmiCEC] received message 45
[eHdmiCEC] received message 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DA E4 33 11 BF 80 FA E4 DE F8 CC FF B2 18 23 3B DD 7C 1F 02 DA 20 1F 02 DA 0C FE 14 C0 04 AD 0A BF 10 15 F6 DE F8 12 F6 DE 04 05 00 00 80 42 F9 DC 5C 1F 02 DA 40 1F 02 DA 5C E7 03 C0 CC B1 03 C0 51 00 00 00 F8 B9 15 C0 0C A8 D2 B6 05 00 00 00 03 4D 13 40 F8 CC FF B2 48 60 01 C0 81 FA E4 DE 05
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'.
[eHdmiCEC] received message 45



NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pulse 4K HDMI-CEC #18 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 27 februari 2022 - 22:13

So the box receives the same CEC command for all those keys. Problem on the sending side, not the receiving side.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Pulse 4K HDMI-CEC #19 pereira69

  • Senior Member
  • 92 berichten

0
Neutral

Geplaatst op 27 februari 2022 - 22:59

Thanks masters for all the help, I would really like to have at least volume and channel change, as I mentioned with the octagon sf8008 everything works fine, I also have the octagon, if I can help in any way please let me know, I already tried to add one today new command but I didn't get any match



Re: Pulse 4K HDMI-CEC #20 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 28 februari 2022 - 01:11

That would suggest some mapping is done low level, in the drivers, which in turn suggests the manufacturer needs to fix it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers