Jump to content


littlesat

Member Since 8 Oct 2005
Online Last Active Today, 11:38
*****

#1607365 Splitscreen mode vu+

Posted by littlesat on 21 February 2024 - 17:54

This is what I see now in SystemInfo.py

 

BoxInfo.setItem("MaxPIPSize", model in ("hd51", "h7", "vs1500", "e4hd") and (360, 288) or (540, 432))

 

It seems for VU it is not limited to 1/4 of a screen but on 540x432.... full size is here 720x576!!! And I see exceptions for some boxes but I already know there are more boxes that need limitations....  I'm afraid we need at least change the 540 432 to 720 576... (it is based on SD resolution as kind of overlay). Somehow this was 'never' maintained....




#1607325 Splitscreen mode vu+

Posted by littlesat on 21 February 2024 - 16:04

Sounds the restriction may be removed... but before we need good testing on all the boxes...But is your output 4K in these cases?




#1607241 [WIP] PLi-DarkOS Skin

Posted by littlesat on 21 February 2024 - 11:40

I'm afraid as this is new and it has a lot of adds that you need to try develop or wait for 9.1




#1604486 Octagon SF8008 Supreme Show Signal Below Lock

Posted by littlesat on 6 February 2024 - 09:21

It would be nice as it makes it also possible to create a kind of spectrum analyzer that could ‘replace’ blindscan. But it needs a better research and also enabling/disabling via eg an enigma2 config at the tuner level and add enable it when we have a tuner that can do it… and/or (in combination) with checks and a value in SystemInfo/BoxInfo as feature, but as it is tuner bounded this is also not easy. Instead of just setting things hardcoded to true. So as in the state it is now it is not good yet.

The basics are a good idea….

When it has a direct pathway to the tuner we may also be able to add finetune in BER…. Something I made long time ago for ancient dreambox 7000…. What low signals still could be tuned by tweaking tuner parameters on BER results.


#1603886 Is there a shortcut for jumping to the beginning Timeshift recording?

Posted by littlesat on 3 February 2024 - 10:31

Try the <> buttons next to the 0 or try stepskip with 1,4,7 for backwards or 3,6,9 for forward steps in 15 sec, 1 min, 5 min steps.


#1600352 CI Module (Kabelio) and Openpli 9

Posted by littlesat on 20 January 2024 - 14:00

You need to fully ensure the CI does not get any requests when changing to other channels....




#1599732 How do I get autoshutdown to work?

Posted by littlesat on 17 January 2024 - 13:08

I can add a setting...

 

FYI: https://github.com/O...faa6bbc9187e98b




#1598796 [WIP] PLi-DarkOS Skin

Posted by littlesat on 13 January 2024 - 13:23

All merged.


#1598280 Satelliet tv vs IPTV

Posted by littlesat on 10 January 2024 - 17:39


 maar een hele TV zodat ze ook controle hebben over wat je nog meer kijkt...

 

Brrrrr and Grrrrr




#1596244 unknown Userbouquet

Posted by littlesat on 4 January 2024 - 12:54

It looks more that cable provider does not follow the standards...

 

When you put a box in standby in the background cablescan will scan again in the background after a few secs... so when you do now want that, you need to disable cablescan...  Disabling should be possible




#1593552 [WIP] PLi-DarkOS Skin

Posted by littlesat on 27 December 2023 - 15:38

It is visible but the contrast between the green current, the black and the gray background is low. So you do not clearly see what event is selected. I understand it is likely the same gray (I did not check it yet) as in channel selection and other lists. Maybe giving it a lighter color, change the font color of the event and/or add a colored border makes it more visible. Unless this at least the coloring could be better here
Also current event and current playing service has the same green color we had green for current playing arrive and blue for current playing event and a lighter blue with yellow font for the selected cursor event. Having two different colors for the green stuf might also already help


#1590188 i have a question

Posted by littlesat on 16 December 2023 - 14:39

It was not only me… also pieterg that time prefered to avoid them. Every thing that can be tweaked needs continuously support and makes the stuff complicated and promotes spaghetti code. All the config stuff in the channel selection is a classic example of it.
But at the end for those who want to tweak… at enigma2’it is possible…

In the skin the menu has a limit width and there are items in Dutch language that do not fit. Maybe the translation could be adapted…


#1589768 DVB subtitles issue, OpenPLi 9.0

Posted by littlesat on 14 December 2023 - 18:26

Merged.... as far I understood in development image... So the initiator needs to test it in the development image.




#1589456 DVB subtitles issue, OpenPLi 9.0

Posted by littlesat on 14 December 2023 - 09:18

Wierd two slightly different iso… a revision with different letters. It can indeed be considered to add the variation.


#1583005 [WIP] PLi-DarkOS Skin

Posted by littlesat on 24 November 2023 - 22:04

Thanks…. Also a second infobar is missing and more but it will be done