Jump to content


ozkaradag

Member Since 6 Apr 2010
Offline Last Active 06 May 2018 14:24
-----

Posts I've Made

In Topic: Howto build unofficial pli for your unsupported receiver

1 May 2018 - 12:49

Persian Prince; What is the situation with the Mecool devices?


In Topic: Howto build unofficial pli for your unsupported receiver

30 April 2018 - 21:13

Greetings,

Observation report:

1- The device can stay on black screen in the first installation according to TV and Hdmi cable. This problem can be overcome by pressing the arrow key once before the command.

2- After installing the device, you can connect with Telnet, define the password with passwd, and list the channel with dreamboxedit editor.

3- 4K video and TV display is OK, but the sound needs to choose aac.AC3 if the sound and display problems. When the image goes and the sound is coming out, the sound strikes in a quiet position.

4 - plugin pool is empty on the device.

5 - I manually set up TSPanel. I did a speed test on Tspanel, and there is internet on the device.

6- I installed the iptvplayer plugin via tspanel, the plugin works, but when iptv tries to open the stream the device restarts. It does not fall on the blue screen.

7- I installed the Turkvod plug-in manually. The plugin works, but when iptv tries to launch it crashes without a blue screen and the device does not boot up again. Even if you delete the plugin with FTP, it does not open. I have re-established the image as a solution 3-4 times.

8- I did not have any problem with skin on TSPanel. There were keys that did not work, and when I restarted, it worked.

9- device control accuracy and response time is very good.

10- The channel change rate is not mediocre, but it is not very fast.

When the channel is turned on, the tuner signal level goes down 1-2 times and then it can stabilize.

For now, you can ask as much as you want, or if there are things you want to test.

Tv can be used to watch at the level.

Best regards...


In Topic: Howto build unofficial pli for your unsupported receiver

29 April 2018 - 11:16

 

But there was no Internet connection and I think that IPTV did not work.

Note: If you do not hear sound on the 4K channel, change the sound system on the Android system. Sound will come.

 

lan connection working fine but i did not check wifi..u must be pointing wifi issue?

how to change sound system in android ?

 

Greetings,

Switch to Android system > Go to Audio Settings > Switch the audio source from Analog to HDMI > and switch to Enigma2.

 

There is a network connection but it does not go to the Internet or connect to the Internet.

Best regards...


In Topic: Howto build unofficial pli for your unsupported receiver

28 April 2018 - 22:29

Greetings,

First of all thank you very much for your valuable work.

I test the image on WP2, my first impressions are very positive.

Scan: OK.
Resolution 4K: OK.
Remote Control functions: OK.
SD, HD and 4K Channels: OK.
Image Quality: It's fine with me.

But there was no Internet connection and I think that IPTV did not work.

Note: If you do not hear sound on the 4K channel, change the sound system on the Android system. Sound will come.

Finally, I strongly recommend this work to the Mecool K1 Pro.

Best regards...