Springen naar inhoud


Djinn

Lid geworden: 24 apr 2017
Offline Laatste activiteit: 23 dec 2019 17:07
-----

Berichten die ik gemaakt heb

In Topic:VU+ Duo2 can only use 2 out of 4 tuners at once

1 december 2018 - 16:20

My problem is solved. There was a broken connector. Did a trial and error-search and started replacing parts. Now it works just fine again.

In Topic:VU+ Duo2 can only use 2 out of 4 tuners at once

20 november 2018 - 18:09

Did you reuse your settings or start afresh?

 

I always do a fresh setup when flashing a new image.


In Topic:VU+ Duo2 can only use 2 out of 4 tuners at once

15 november 2018 - 19:58

Well, if the config is faulty or the splitter is of the wrong type, how come it's been working for almost two years?
Makes no sense. The problem started occuring after an update, could there have been an error during reboot, like a power spike or surge that may have broken the splitter or the LNB?

In Topic:VU+ Duo2 can only use 2 out of 4 tuners at once

14 november 2018 - 15:29

There's the config. The only thing that differs between the tuners is channel for SCR.
Worked before, not working anymore.

In Topic:VU+ Duo2 can only use 2 out of 4 tuners at once

13 november 2018 - 20:32

Inverto Unicable LNB at 0,8W at a T-55. Forget about the 5.0E, that one isn't connected to this reciever at all, and has no connection to the 0.8W LNB

Single cable from LNB to my reciever (18 meters) where a splitter is used to get 4 cables at 1 meter each to connect to the tuners. How else am I supposed to use the 4 tuners?

A combiner is not needed when using a single cable LNB since the signal is already combined in the LNB, but you do need a SPLITTER at the other end to get more than one cable to connect. This one (splitter) uses the range 5-2500MHz which is well within the specs for using the unicable standard.

 

SETUP:

 

                                                                                                                           I----1m cable----Tuner A           

                                                                                                                           I

                                                                                                                           I     I----1m cable----Tuner B

                                                                                                                           I     I

Inverto UNICABLE LNB 0.8W------approx 18 meters cable---------splitter 5-2500MHz

                                                                                                                           I     I

                                                                                                                           I     I----1m cable----Tuner C

                                                                                                                           I

                                                                                                                           I----1m cable----Tuner D

                                                                            

 

Clear enough?