Jump to content


Calico

Member Since 18 Jun 2010
Offline Last Active 16 May 2016 16:04
-----

Topics I've Started

Boblight plugin stucks STB in deep standby ?

2 September 2014 - 21:47

Hello,

 

Everything worked like a charm on a Vu+ Uno since a few weeks, and this morning, I made a software update. After the reboot, I see the OpenPLi logo for about 30 seconds then it goes to deep standby. If I press the Standby button (front panel or remote control), I got the same behaviour.

 

The STB is useless in that state

I tried a RS232 cable in order to get more information at boot, but unfortunately I think it is broken as I don't see any output.

 

After a few hours of test, it seems that enigma2-plugin-extensions-boblight-enigma2 plugin is the main problem. With a fresh OpenPLi 4.0 image (20140209 and 20140130), an opkg update followed by an installation of this SPECIFIC plugin causes the problem.

 

Is there anyone here using Boblight plugin ?

 

Here are the results from some tests :

 

- opkg install enigma2-plugin-extensions-boblight-enigma2 (depends on libusb-1.0-0, kernel-module-cdc-acm, kernel-module-ftdi-sio and kernel-module-usbserial) : Not working

 

root@vuuno:~# opkg install enigma2-plugin-extensions-boblight-enigma2
Installing enigma2-plugin-extensions-boblight-enigma2 (0.8r6) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/enigma2-plugin-extensions-boblight-enigma2_0.8r6_mips32el.ipk.
Installing libusb-1.0-0 (1.0.19-r0) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el/libusb-1.0-0_1.0.19-r0_mips32el.ipk.
Installing kernel-module-cdc-acm (3.1.1-r4.10.13) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/vuuno/kernel-module-cdc-acm_3.1.1-r4.10.13_vuuno.ipk.
Installing kernel-module-ftdi-sio (3.1.1-r4.10.13) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/vuuno/kernel-module-ftdi-sio_3.1.1-r4.10.13_vuuno.ipk.
Installing kernel-module-usbserial (3.1.1-r4.10.13) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/vuuno/kernel-module-usbserial_3.1.1-r4.10.13_vuuno.ipk.

Check if boblightd or boblight-enigma2 is running...

Boblight-enigma2: not running
Boblightd: not running

File /etc/boblight.conf does not exist in /etc/
Configuring libusb-1.0-0.
Configuring kernel-module-usbserial.
Configuring kernel-module-ftdi-sio.
Configuring kernel-module-cdc-acm.
Configuring enigma2-plugin-extensions-boblight-enigma2.
Found VU+UNO, Supported
Configuring Boblight...
Reload udev rules...
Set permissions...
Remove temp files...


#####################  Boblight installed... #######################

You can now use the Plugin.
Please RESTART Enigma2 or REBOOT box to activate the GUI.
don't forget to create a configuration file.


For samplefiles look in /home/boblight-addons/

####################################################################

 

- opkg install enigma2-plugin-extensions-boblight-enigma2 --nodeps : Not working

 

root@vuuno:~# opkg install enigma2-plugin-extensions-boblight-enigma2 --nodeps
Installing enigma2-plugin-extensions-boblight-enigma2 (0.8r6) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/enigma2-plugin-extensions-boblight-enigma2_0.8r6_mips32el.ipk.

Check if boblightd or boblight-enigma2 is running...

Boblight-enigma2: not running
Boblightd: not running

File /etc/boblight.conf does not exist in /etc/
Configuring enigma2-plugin-extensions-boblight-enigma2.
Found VU+UNO, Supported
Configuring Boblight...
Reload udev rules...
Set permissions...
Remove temp files...


#####################  Boblight installed... #######################

You can now use the Plugin.
Please RESTART Enigma2 or REBOOT box to activate the GUI.
don't forget to create a configuration file.


For samplefiles look in /home/boblight-addons/

####################################################################

 

Thanks for your help.


[France] Missing references for Canalsat

13 August 2014 - 07:35

Hello,

Would it be possible to add EPG for these references :

 

BOING : 1:0:1:2522:456:1:C00000:0:0:0:

Cartoon Network : 1:0:1:219E:448:1:C00000:0:0:0:

M6 Music Black : 1:0:1:2584:458:1:C00000:0:0:0:

 

Thanks