Jump to content


nfnovice

Member Since 3 Mar 2007
Offline Last Active 19 Apr 2019 17:11
-----

Posts I've Made

In Topic: USB DVB-T Tuner in Vu+Duo

3 November 2013 - 20:36

 
@nfnovice, glad you've got 7mhz bandwidth going.
 
I didn't realise there were any 8mhz channels in Australia (I'm assuming that's your location).
 
regards

Off the coast of Australia. Tiny dot in the pacific. We do things different out here. Cheers

In Topic: USB DVB-T Tuner in Vu+Duo

3 November 2013 - 02:13

I have now got a channel scanned

locally - they broadcast both 8mhz and 7mhz channels

I have now got the 7mhz channel receiving fine - after changes to terrestrial.xml

still no go on 8mhz channels

In 6 weeks - all channels will go from 8mhz to 7mhz - so I may be right to test again when that happens

 

athoik - thank you for your persistence and assistance

kind regards


In Topic: USB DVB-T Tuner in Vu+Duo

3 November 2013 - 00:36

well that cleared the error

now get

Quantek QT1010 successfully identified.
instead - but still no channels on scan ....

thank you for interest


In Topic: USB DVB-T Tuner in Vu+Duo

2 November 2013 - 23:27

Ok - that made some improvement

I already had drivers 9015 and kernel 9013

I installed tda18271 (both pkgs)

now I can now see the tuner in list of tuners

But cannot tune any channels

cable is fine tested on TV - scanned great

Terrestrial settings double checked look ok

but no channels found on scan

 

dmesg gives :

dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
af9013: firmware version:4.95.0.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
DVB: Unable to find symbol qt1010_attach()
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0/input1
rc0: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0
dvb-usb: schedule remote query interval to 500 msecs.
dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9015
 

 

I am guessing it may be this line

DVB: Unable to find symbol qt1010_attach()


In Topic: USB DVB-T Tuner in Vu+Duo

2 November 2013 - 08:45

MIssed a few lines from dmesg

 

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
DVB: Unable to find symbol af9013_attach()
dvb-usb: no frontend was attached by 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)'
 

must be the unable to find symbol af9013_attach()

 

how to fix that ?