bogyman

hello

i have vu+ uno with 1.5 build and tried to run aver media volar hd pro but it wont show on service searching ( not recognized)

root@vuuno:~# lsusb


Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 07ca:a835 AVerMedia Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@vuuno:~# dmesg | grep dvb
dvb_bcm7413: module license 'Proprietary' taints kernel.



root@vuuno:~# lsmod

Module				  Size  Used by
zd1211rw			   55901  0
usbserial			  30919  0
rtl8187			    54063  0
rt73usb			    24424  0
rt2800usb			  13089  0
rt2800lib			  44771  1 rt2800usb
rt2500usb			  18185  0
rt2x00usb			  10921  3 rt73usb,rt2800usb,rt2500usb
rt2x00lib			  40538  5 rt73usb,rt2800usb,rt2800lib,rt2500usb,rt2x00usb
r8712u			    169530  0
8192cu			    542901  0
ipv6				  342438  10
carl9170			   83694  0
ath9k_htc			  63975  0
mac80211			  211445  7 zd1211rw,rtl8187,rt2800lib,rt2x00usb,rt2x00lib,carl9170,ath9k_htc
ath9k_common		    1442  1 ath9k_htc
ath9k_hw			  310668  2 ath9k_htc,ath9k_common
ath				    16979  3 carl9170,ath9k_htc,ath9k_hw
fpga_directc		   57585  0
brcmfb				  1127  2
dvb_bcm7413		  5048714  2 fpga_directc,brcmfb
procmk				  1397  2 fpga_directc,dvb_bcm7413

hello all

gbox.net 804 dont work on openpli via softcam menu
only if i start dccamd FIRST then gbox via putty ( telnet)
anybody can help with script ?

BH E2 http://pastebin.com/MZnCCRKG


best regards

hello

i am using latest openpli on my vu+ uno
no media player menu ? and xvid or mp4 movies playable

eServiceMP3::construct!
eServiceMP3::playbin2 uri=file:///media/hdd/movie/Odysseus.Voyage.To.The.Underworld.2008.DVDRip.Xvid-VoMiT.avi
eServiceMP3::starting pipeline
getBouquet failed.. no path given!
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[FanControl2] Vlt:210 Pwm:170 Fan:3pin   - BoxOn HDDon
[FanControl2] currentRPM:1165 targetRPM:750 Temp:29.0
eServiceMP3::state transition NULL -> READY
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::getSubtitleList finished
eServiceMP3::state transition READY -> PAUSED
eServiceMP3::async-done - 1 video, 1 audio, 0 subtitle
AUDIO STRUCT=audio/mpeg
eServiceMP3::audio stream=0 codec=MPEG 1 Audio, Layer 3 (MP3) language=und
eServiceMP3::getSubtitleList finished
eServiceMP3::state transition PAUSED -> PLAYING
eServiceMP3::getSubtitleList finished
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1cc1528

hello

i am using gbox 802 and have problem with my vu+ uno
when gb0x is autostarted its cant decode any channel ( emu + softcam) shows >>> restarting pid
when start via telnet is running ok
maybe its realted to 3.1.1 kernel

btw whats is the config for mips box ?

# cpu, api, cw write method
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
#J: { 00 03 01 00 00 }

hello

its been a while that this great plugin dont work on vu+ old kernel and new one
it was working on pli dreamnbox 500hd

best regards