Jump to content


Robinson

Member Since 26 Jun 2011
Offline Last Active Yesterday, 22:50
-----

#435441 Problem with mkv playback

Posted by Robinson on 26 July 2014 - 10:12

Stargate has 214 episodes. And that's only one series. It's too long for me, but nice for you when you have such a lot of time ;)

That is a surprising statement indeed.




#423906 openpli 4 recording problems

Posted by Robinson on 19 May 2014 - 13:02

This is normal for 27.5W. You can't do anything about that. I assume you are using doublet's script to watch BBC/ITV channels?

You need a different receiver to be able to enjoy watching one channel and recording a different one at 27.5W.

This problem is only for 27.5W, doesn't happen on any other satellites.




#423456 Transcoding problem

Posted by Robinson on 16 May 2014 - 19:33

Shall we just start ignoring that rude Russian guy?




#422503 Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge

Posted by Robinson on 12 May 2014 - 19:31

I'm not sure but in the long mode it is hopefully possible only if the same channel is actually on. The same goes for recording.




#421173 FTA/Encrypted flag in ServiceScan/lamedb

Posted by Robinson on 5 May 2014 - 09:03

I wouldn't sacrifice scan speed just to have a FTA/encrypted icon.

Just a thought from a normal user.




#395277 SESE - Simple Enigma Settings Editor

Posted by Robinson on 30 December 2013 - 22:43

What are its advantages over the commonly-used DreamboxEdit tool?




#388634 How many euros will you spend on an Android Receiver ?

Posted by Robinson on 23 November 2013 - 09:58

It would be interesting if such a receiver could support the following:

- 4:2:2

- ACM/VCM modulation

- 16APSK, 32APSK

 

Is this at all possible or only DVB cards can do that?




#373777 Problem with USALS

Posted by Robinson on 16 September 2013 - 10:54

I understand you have a rotor and a twin LNB and 2 tuners on your box?

Which tuner is directly connected to your rotor? Tuner A or B?

Also, I think tuner B should be somethiong like "second cable of a motorized dish" and not "equal to A" because only 1 cable is connected to your rotor, not both.




#360601 Installing the OnDemand plugin (BBC/ITV/C4)

Posted by Robinson on 11 July 2013 - 22:29

So all in all, as we are an OpenPLi forum, is there any way to get BBC Player working on OpenPLi at the moment?

If so, what IPK or anything else should we install./copy to extensions directory?




#338289 Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge

Posted by Robinson on 6 March 2013 - 23:33

Here is one more log, this time it comes from an HD channel:

OpenEmbedded Linux dm800se

openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# init 4
root@dm800se:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12744 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/default/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
/proc/stb/frontend/0/lnb_sense is 8
[Harddisk] enumerating block devices...
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
413 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 406
87 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 493
126 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 609
81 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 690
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 732
19 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 751
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 951
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1041
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1077
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1344
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1548
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1681
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1723
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1765
35 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1799
4 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1801
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1801
13 entries in Bouquet userbouquet.LastScanned.tv
18 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
setMode - port: DVI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1362608202.57
starting hotplug handler
[EPGImport] autostart (0) occured at 1362608202.62
[EPGImport] WakeUpTime now set to 1362642300 (now=1362608202)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 75
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:1:1044:1000:1:CFDACE7:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
opening frontend 0
(0)tune
Entry for 332,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 21.783001, 332.500000 degrees
PolarmountHourAngle=233.793418
RotorCmd = d35d
RotorCmd d35d, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 11495000 Pol 1 SR 44100000 INV 2 FEC 9 orbpos 3325 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1745 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1044:1000:1:CFDACE7:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed35d
[SEC] sleep 1000ms
set sequence pos 3
set sequence pos 3
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok (887 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok (887 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok (889 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok (892 890)
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2d1b15f0 running
[eEPGCache] channel 0x2d1b15f0 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0065), and 1 audio stream(s) (0066), and the pcr pid is 0065, and the text pid is ffffffff
allocate demux
[EPGC] next update in 2 sec
TuxTxt cache cleared
decoder state: play, vpid=101, apid=102
DMX_SET_PES_FILTER(0x65) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x66) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x65) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0069 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[SEC] update current rotorparams 1435 d35d 3325
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 0064 for service_id 1044
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
sdt update done!
[EPGC] start caching events(1362608210)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
DVB service failed to tune - error 4
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!
action ->  InfobarChannelSelection openServiceList
action ->  OkCancelActions ok
playing 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
cleaning up
TuxTxt cache cleared
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4484:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (19c9), and 0 audio stream(s), and the pcr pid is 19c9, and the text pid is ffffffff
TuxTxt cache cleared
decoder state: play, vpid=6601, apid=-1
DMX_SET_PES_FILTER(0x19c9) - pcr - ok
DEMUX_START - pcr - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x19c9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x19cd with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
PATready
use pmtpid 19c8 for service_id 4484
DVB service failed to tune - error 4
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!

Channel details:
BBC One HD (27.5°W)
TP: 11495 H 44100 9/10 DVB-S2 QPSK
- CAID 2600
- SID 4484
- VPID 19C9
- APID 19CA
- PMT 19C8
- PCR PID 19C9
- ECM PID 1FFF
- Transport ID 1000
- Network ID 0001
- ProvID 000000

If you need some more specific tests or logs, I will be glad to provide them.


#297255 Is my Dreambox a clone?

Posted by Robinson on 7 September 2012 - 22:38

Maybe the Newnigma image you were trying to install was for clones.


#261911 Rytec uk XMLTV down ?

Posted by Robinson on 8 March 2012 - 21:46

In another topic Willy mentioned he is overhauling Sky UK so perhaps this is the problem and will be solved sooner or later.


#239490 FTA source

Posted by Robinson on 18 December 2011 - 20:56

Hi,
I don't want to make a revolution in XMLTV sources but I think it would make sense to list a separate source in Rytec sources: FTA.
Let me explain why. All big packages like Sky Germany, Sky Italia, Canalsat France etc. carry some channels which can be viewed by anyone (FTA channels) and everybody can have access to them without subscribing to this package. However, to have access to EPG for those FTA channels one has to download EPG for the whole package. It would be useful to have a separate category: FTA which would include only FTA channels from all packages.
It could also be divided among the most popular orbital positions: FTA 13E. FTA 19.2E, etc.
I realize, though, this is lots of work.
What do others think about this proposal?


#239487 Dreambox-Mediaset

Posted by Robinson on 18 December 2011 - 20:46

I think he menas this: http://pl.kingofsat....ck-mediaset.php