Problem solved.
I've just flash my STB with today image (et9x00 2012-12-17) , installed a867 kernel module and all works fine.
Now a867 module is loaded AFTER dvb-s2 frontend
DVB: registering new adapter (dvb0)
DVB: registering adapter 0 frontend 0 (DVB-S2)...
DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
AVerMedia A867 driver module V1.0.27 loaded.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb-usb-a867
- Forums
- → Bekijkt een profiel: Berichten: ambrosa
ATTENTION !!!
Due to a database corruption issue, we were forced to restore last-nights backup. This means all posts of Saterday Febuary 17th have been lost.Statistieken
- Groep: Senior Member
- Aantal berichten: 161 ( per dag)
- Profiel bekeken: 12280
- Leeftijd: 58 jaar oud
- Verjaardag: Januari 1, 1966
-
Gender
Man
-
Location
Italy
Contactinfomatie
Berichten die ik gemaakt heb
In Topic:Today upgrade make my STB not working
17 december 2012 - 18:23
In Topic:Today upgrade make my STB not working
16 december 2012 - 20:03
Do you use autobackup? Perhaps delete autobackup settings and try fresh flash again.
That way you can be absolutely sure that no old / incorrect settings are reapplied.
No, I hate autobackup for the same reasons :-)
In Topic:Today upgrade make my STB not working
16 december 2012 - 19:19
Milo is referring to this fix (I presume): http://openpli.git.s...57b006cd27adf87
Looks to be fine...
Removing USB modules and reboot, system is working again (only with DVB-S2 tuners obviously)
root@et9x00:~# opkg remove kernel-module-dvb-usb-a867
Removing package kernel-module-dvb-usb-a867 from root...
root@et9x00:~# opkg remove kernel-module-dvb-usb
Removing package kernel-module-dvb-usb from root...
In Topic:Today upgrade make my STB not working
16 december 2012 - 19:11
Thanks Milo.
BTW I've just flash with previous image OpenPLi-3.0-beta-et9x00-20121215_usb.zip (yesterday image) and IT WORKS.
Then I've made just now (19:03 CET) an opkg update + upgrade and then reboot.
System IS WORKING again (??)
Then I've installed A867 kernel module 'opkg install kernel-module-dvb-usb-a867' and reboot.
After that system STOP WORKING as before.
All tuners (DVB-S2 and DTT) stop working after loading A867 kernel module.
BTW I've just flash with previous image OpenPLi-3.0-beta-et9x00-20121215_usb.zip (yesterday image) and IT WORKS.
Then I've made just now (19:03 CET) an opkg update + upgrade and then reboot.
System IS WORKING again (??)
Then I've installed A867 kernel module 'opkg install kernel-module-dvb-usb-a867' and reboot.
After that system STOP WORKING as before.
All tuners (DVB-S2 and DTT) stop working after loading A867 kernel module.
In Topic:Today upgrade make my STB not working
16 december 2012 - 18:27
NO SUCCESS
I've just reflash from scratch my CT9100 with OpenPLi-3.0-beta-et9x00-20121216_usb.zip
- flash ok
- initial setup ok
- install A867 kernel module ok
Exactly as before: third tuner (DTT A867) is missing (dmesg is ok as before), Tuner A&B (DVB-S2) correctly configured but same error as before.
Full scan not working: search exit immediately
HyperBUG somewhere.....
I've just reflash from scratch my CT9100 with OpenPLi-3.0-beta-et9x00-20121216_usb.zip
- flash ok
- initial setup ok
- install A867 kernel module ok
Exactly as before: third tuner (DTT A867) is missing (dmesg is ok as before), Tuner A&B (DVB-S2) correctly configured but same error as before.
Full scan not working: search exit immediately
HyperBUG somewhere.....
- Forums
- → Bekijkt een profiel: Berichten: ambrosa