messenmack

That's not old, that's in your prime!

 

 

If you tried the Freeview box and the VU+ Solo on the same cable, we can rule out an issue with the cable, switches (if any), dish or LNB.

 

It was actually a different cable, different room.

 

I took the Xtrend downstairs, and now all is as it should be.

 

Since you tried a Freeview box, and that worked, and I know Freeview doesn't support DiSeqC or multiple LNB's, you have a dish with a single LNB (like a SKY dish for example).

 

That means your tuner configuration is wrong, as you wrote you've tried to scan multiple satellites. A single SKY LNB needs to be configured like so:

1_0_1_133C_107C_233A_EEEE0000_0_0_0_20240426131234.jpg

 

After which you should be able to scan it.

 

Thanks for your help WW, I had already told myself it couldn't be the cable, go figure.

 

And my wife thanks you for saving my remaining hair.

 

Have a great weekend.