Jump to content


gericooper

Member Since 23 Jul 2012
Offline Last Active 17 Aug 2022 10:03
-----

Posts I've Made

In Topic: Openpli 6.2 Festplatte wird nicht erkannt

1 February 2019 - 18:13

Auch bei OpenPLI 7 keine Änderung.

Kann man dieses Modul  opkg install kernel-module-uas nicht in das Image integrieren?


In Topic: Openpli 6.2 Festplatte wird nicht erkannt

4 November 2018 - 10:41

Hab heute das neueste Image installiert und die Festplatte wurde wieder nicht erkannt.

Muss ich jetzt jedesmal dieses Modul nachinstallieren damit es funktioniert?

opkg install kernel-module-uas


In Topic: Openpli 6.2 Festplatte wird nicht erkannt

16 August 2018 - 07:33

Wurde hier diesbezüglich schon eine gute Lösung gefunden?


In Topic: Openpli 6.2 Festplatte wird nicht erkannt

9 August 2018 - 10:50

Ohne Festplatte:

 

formuler1 login: root
root@formuler1:~# dmesg -c
[    0.010000] Primary data cache 32kB, 4-way, linesize 32 bytes.
[    0.010000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
[    0.010000] CPU1 revision is: 00025a11 (Broadcom BMIPS5000)
[    0.010000] FPU revision is: 00130001
[    0.019000] SMP: CPU1 is running
[    0.019000] smp: Brought up 1 node, 2 CPUs
[    0.019000] devtmpfs: initialized
[    0.022000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.022000] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.022000] NET: Registered protocol family 16
[    0.036000] USB0: power enable is active high; overcurrent is active low
[    0.036000] USB1: power enable is active high; overcurrent is active low
[    0.045000] SCSI subsystem initialized
[    0.045000] libata version 3.00 loaded.
[    0.045000] usbcore: registered new interface driver usbfs
[    0.045000] usbcore: registered new interface driver hub
[    0.045000] usbcore: registered new device driver usb
[    0.045000] Linux cec interface: v0.10
[    0.045000] Linux video capture interface: v2.00
[    0.046000] Advanced Linux Sound Architecture Driver Initialized.
[    0.046000] Bluetooth: Core ver 2.22
[    0.046000] NET: Registered protocol family 31
[    0.046000] Bluetooth: HCI device and connection manager initialized
[    0.046000] Bluetooth: HCI socket layer initialized
[    0.046000] Bluetooth: L2CAP socket layer initialized
[    0.046000] Bluetooth: SCO socket layer initialized
[    0.047000] clocksource: Switched to clocksource wktmr
[    0.047000] FS-Cache: Loaded
[    0.054000] random: fast init done
[    0.056000] NET: Registered protocol family 2
[    0.056000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.056000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.057000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.057000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.057000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.057000] NET: Registered protocol family 1
[    0.057000] RPC: Registered named UNIX socket transport module.
[    0.057000] RPC: Registered udp transport module.
[    0.057000] RPC: Registered tcp transport module.
[    0.057000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.059000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.059000] NFS: Registering the id_resolver key type
[    0.059000] Key type id_resolver registered
[    0.059000] Key type id_legacy registered
[    0.059000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.059000] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[    0.060000] fuse init (API version 7.26)
[    0.066000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.066000] io scheduler noop registered
[    0.066000] io scheduler cfq registered (default)
[    0.067000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.068000] console [ttyS0] disabled
[    0.068000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
[    0.617000] console [ttyS0] enabled
[    0.621000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
[    0.630000] serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
[    0.646000] loop: module loaded
[    0.649000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[    0.666000] ahci ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
[    0.673000] ahci ahci.0: flags: ncq sntf stag clo pmp slum part
[    0.684000] scsi host0: ahci
[    0.688000] scsi host1: ahci
[    0.691000] scsi host2: ahci
[    0.694000] ata1: FORCE: PHY spd limit set to 3.0Gbps
[    0.699000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
[    0.707000] ata2: FORCE: PHY spd limit set to 3.0Gbps
[    0.712000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
[    0.720000] ata3: DUMMY
[    0.723000] brcmstb_nand: NAND controller driver is loaded
[    0.729000] libphy: Fixed MDIO Bus: probed
[    0.733000] __clk_enable: network [1]
[    0.733000] __clk_enable: enet [1]
[    0.733000] bcm40nm_pm_genet_enable 00
[    0.733000] bcmgenet bcmgenet.0: GENET 2.9 EPHY: 0x00b0
[    0.739000] bcmgenet bcmgenet.0: failed to get enet-eee clock
[    1.037000] ata1: SATA link down (SStatus 0 SControl 320)
[    1.349000] ata2: SATA link down (SStatus 0 SControl 320)
[    1.442000] libphy: bcmgenet MII bus: probed
[    1.446000] __clk_disable: enet [0]
[    1.446000] bcm40nm_pm_genet_disable 00
[    1.446000] __clk_disable: network [0]
[    1.447000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.453000] __clk_enable: usb [1]
[    1.453000] bcm40nm_pm_usb_enable 00
[    1.453000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[    1.458000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[    1.476000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
[    1.489000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[    1.495000] hub 1-0:1.0: USB hub found
[    1.499000] hub 1-0:1.0: 1 port detected
[    1.503000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[    1.508000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[    1.526000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
[    1.539000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[    1.545000] hub 2-0:1.0: USB hub found
[    1.549000] hub 2-0:1.0: 1 port detected
[    1.553000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
[    1.558000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
[    1.576000] ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
[    1.589000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
[    1.595000] hub 3-0:1.0: USB hub found
[    1.599000] hub 3-0:1.0: 1 port detected
[    1.603000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
[    1.608000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
[    1.626000] ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
[    1.639000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
[    1.645000] hub 4-0:1.0: USB hub found
[    1.649000] hub 4-0:1.0: 1 port detected
[    1.653000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.659000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[    1.664000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
[    1.672000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
[    1.744000] hub 5-0:1.0: USB hub found
[    1.748000] hub 5-0:1.0: 1 port detected
[    1.752000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[    1.757000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
[    1.765000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
[    1.837000] hub 6-0:1.0: USB hub found
[    1.841000] hub 6-0:1.0: 1 port detected
[    1.846000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
[    1.851000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
[    1.858000] ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
[    1.930000] hub 7-0:1.0: USB hub found
[    1.934000] hub 7-0:1.0: 1 port detected
[    1.938000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
[    1.943000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
[    1.951000] ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
[    2.023000] hub 8-0:1.0: USB hub found
[    2.027000] hub 8-0:1.0: 1 port detected
[    2.032000] usbcore: registered new interface driver usb-storage
[    2.038000] mousedev: PS/2 mouse device common for all mice
[    2.043000] i2c /dev entries driver
[    2.047000] usbcore: registered new interface driver btusb
[    2.053000] sdhci: Secure Digital Host Controller Interface driver
[    2.059000] sdhci: Copyright© Pierre Ossman
[    2.063000] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.069000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
[    2.075000] mmc0: Failed to set 32-bit DMA mask.
[    2.080000] mmc0: No suitable DMA available - falling back to PIO
[    2.118000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
[    2.125000] hidraw: raw HID events driver © Jiri Kosina
[    2.131000] usbcore: registered new interface driver usbhid
[    2.136000] usbhid: USB HID core driver
[    2.141000] NET: Registered protocol family 17
[    2.146000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.152000] Bluetooth: HIDP socket layer initialized
[    2.157000] Key type dns_resolver registered
[    2.161000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[    2.169000] EBI CS0: setting up NAND flash (primary)
[    2.174000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
[    2.180000] nand: Hynix H27U4G8F2DTR-BC
[    2.184000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.192000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
[    2.198000] nand: Hynix H27U4G8F2DTR-BC
[    2.202000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.210000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
[    2.220000] Bad block table found at page 262080, version 0x01
[    2.226000] Bad block table found at page 262016, version 0x01
[    2.233000] Creating 3 MTD partitions on "brcmnand.0":
[    2.238000] 0x000000500000-0x000020000000 : "complete"
[    2.244000] usb 6-1: new full-speed USB device number 2 using ohci-brcm
[    2.251000] 0x000000500000-0x000000b00000 : "kernel"
[    2.257000] 0x000000b00000-0x000020000000 : "rootfs"
[    2.267000] ubi0: default fastmap pool size: 200
[    2.271000] ubi0: default fastmap WL pool size: 100
[    2.276000] ubi0: attaching mtd2
[    2.660000] random: crng init done
[    5.195000] ubi0: scanning is finished
[    5.213000] ubi0: attached mtd2 (name "rootfs", size 501 MiB)
[    5.219000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.226000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.233000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.240000] ubi0: good PEBs: 4004, bad PEBs: 4, corrupted PEBs: 0
[    5.246000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.253000] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 492254602
[    5.262000] ubi0: available PEBs: 0, total reserved PEBs: 4004, PEBs reserved for bad PEB handling: 76
[    5.271000] ubi0: background thread "ubi_bgt0d" started, PID 90
[    5.271000] ALSA device list:
[    5.271000]   No soundcards found.
[    5.285000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 91
[    5.391000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    5.398000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.408000] UBIFS (ubi0:0): FS size: 496603136 bytes (473 MiB, 3911 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs
)
[    5.419000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    5.425000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID DAE1A999-9CE5-475C-9E04-D616F8831FB2, small L
PT model
[    5.438000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    5.446000] devtmpfs: mounted
[    5.449000] Freeing unused kernel memory: 284K
[    5.454000] This architecture does not have kernel memory protection.
[    6.108000] formuler1_1: loading out-of-tree module taints kernel.
[    6.117000] usbcore: registered new interface driver tpm
[    9.695000] formuler1: module_layout: kernel tainted.
[    9.700000] Disabling lock debugging due to kernel taint
[   11.541000] input: dreambox remote control (native) as /devices/virtual/input/input0
[   11.553000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[   11.647000] dvbdev: DVB: registering new adapter (dvb0)
[   11.654000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
[   11.687000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
[   11.999000] input: front panel as /devices/virtual/input/input2
[   12.061000] Registered IR keymap rc-cec
[   12.065000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[   12.073000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[   14.118000] __clk_enable: network [1]
[   14.118000] __clk_enable: enet [1]
[   14.118000] bcm40nm_pm_genet_enable 00
[   14.242000] bcmgenet bcmgenet.0: configuring instance for external RGMII (TX delay)
[   14.651000] NET: Registered protocol family 10
[   14.657000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.663000] Segment Routing with IPv6
[   15.394000] bcmgenet bcmgenet.0 eth0: Link is Down
[   17.581000] bcmgenet bcmgenet.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   17.588000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@formuler1:~#

 

Festplatte angesteckt!

 

root@formuler1:~# dmesg
[  121.430000] usb 1-1: new high-speed USB device number 2 using ehci-brcm
root@formuler1:~#

 

Kann trotzdem nicht darauf zugreifen.

 

Hab dann dies installiert.

opkg install kernel-module-uas

 

Jetzt funktionierts!!!!  SUPER!!!!!


In Topic: Openpli 6.2 Festplatte wird nicht erkannt

8 August 2018 - 13:35

Bitte frag nach.

Welche Festplatten würden funktionieren?

Momentan hab ich ja ne Seagate USB3.0 die nicht geht.