Jump to content


zildan

Member Since 19 Nov 2012
Offline Last Active Yesterday, 20:10
-----

Posts I've Made

In Topic: Howto build unofficial pli for your unsupported receiver

1 September 2018 - 16:00

With latest test image (31.08)

 

- K3 pro old problems

 = 1500000) is a meson_uart
[    2.548674@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change                                  0 to 115200
[    2.551395@0] console [ttyS0] enabled
[    2.551395@0] console [ttyS0] enabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.568044@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.574420@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud                                  = 1500000) is a meson_uart
[    2.584699@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy:                                  d0078000, ctrl: 0
[    2.692821@7] dwc_otg: Core Release: 3.10a
[    2.692890@3] dwc_otg: Setting default values for core params
[    2.697001@3] dwc_otg: curmode: 0, host_only: 0
[    2.712933@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.712933@3]
[    2.730226@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.730226@3]
[    2.746255@3] dwc_otg: Using Buffer DMA mode
[    2.746272@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.750144@3] dwc_otg: Working on port type = SLAVE
[    2.754984@3] dwc_otg: Dedicated Tx FIFOs mode


- A5 Boot ok, wizard Ok, freeze at scan!

In Topic: Howto build unofficial pli for your unsupported receiver

20 August 2018 - 20:59

Boot ok, telnet ok, no hdmi output.

 

Alien5 use android kernel config !


In Topic: Howto build unofficial pli for your unsupported receiver

20 August 2018 - 18:22

:(

[    2.542089@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    2.557081@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[    2.559721@0] console [ttyS0] enabled
[    2.559721@0] console [ttyS0] enabled
[    2.566953@0] bootconsole [earlycon0] disabled
[    2.566953@0] bootconsole [earlycon0] disabled
[    2.576276@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.582783@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    2.592908@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    2.700876@0] dwc_otg: Core Release: 3.10a
[    2.700901@0] dwc_otg: Setting default values for core params
[    2.705052@0] dwc_otg: curmode: 0, host_only: 0
[    2.720964@0] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.720964@0]
[    2.738275@0] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.738275@0]
[    2.754313@0] dwc_otg: Using Buffer DMA mode
[    2.754331@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.758201@0] dwc_otg: Working on port type = SLAVE
[    2.763047@0] dwc_otg: Dedicated Tx FIFOs mode


Old problems, logo on screen and blue led

In Topic: Howto build unofficial pli for your unsupported receiver

20 August 2018 - 16:26

 

[    2.675397@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    2.685579@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    2.793438@2] dwc_otg: Core Release: 3.10a
[    2.793473@2] dwc_otg: Setting default values for core params
[    2.797643@2] dwc_otg: curmode: 0, host_only: 0
[    2.813535@2] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.813535@2] 
[    2.830880@2] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.830880@2] 
[    2.846928@2] dwc_otg: Using Buffer DMA mode
[    2.846949@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.850819@2] dwc_otg: Working on port type = SLAVE
[    2.855706@2] dwc_otg: Dedicated Tx FIFOs mode

Thanks for your effort again, still stuck with the blue LED and logo on the screen :(

Full log in atasament, with android log after

 

defenv;sleep 1; saveenv;reboot

 

ok this is a kernel extracted from the libreelec version that you pointed replace your zImage with this

https://drive.google...36TeyDhNjBO6Drc

 

 

 

Boot ok, black screen, ip, ssh etc.

I need ssh password.


In Topic: Howto build unofficial pli for your unsupported receiver

19 August 2018 - 15:34

[    2.675397@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    2.685579@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    2.793438@2] dwc_otg: Core Release: 3.10a
[    2.793473@2] dwc_otg: Setting default values for core params
[    2.797643@2] dwc_otg: curmode: 0, host_only: 0
[    2.813535@2] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.813535@2] 
[    2.830880@2] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001
[    2.830880@2] 
[    2.846928@2] dwc_otg: Using Buffer DMA mode
[    2.846949@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.850819@2] dwc_otg: Working on port type = SLAVE
[    2.855706@2] dwc_otg: Dedicated Tx FIFOs mode

Thanks for your effort again, still stuck with the blue LED and logo on the screen :(

Full log in atasament, with android log after

 

defenv;sleep 1; saveenv;reboot