Jump to content


WTE

Member Since 12 Dec 2012
Offline Last Active 11 May 2023 17:15
**---

#1233478 One proc file for detecting the MACHINE in all enigma2 images.

Posted by WTE on 17 July 2020 - 10:33

Just an idea

 

This topic is eventually more about OEM models right?

I think you should check first if you can build one packages for more boxes.

 

Like you have trio4k, sf8008, ustym which are the "same manufacture" but on build/feed side it's mayor and time wasting as for all boxes an own MACHINE feed is made.

I think you should have an "OEM-Machine" feed which has linuxkernel, hbbtv, kodi, webkit, chromium. Then eventually in Machine feed you have just a couple of packages left which specify the box.

 

For boxes with one driver and don't do OEM machine names it's maybe possible to add in the end of the build an extra file/ feed which informs the brand.

I do not know of bitbake this all is possible but I prefer fewer packages builds first and see then how to brand it better.




#1221522 branch zeus

Posted by WTE on 18 June 2020 - 14:15

but the develop branch is still thud?

A lot of things have been taken over from the zeus, but OE-core, OE, Bitbake is still thud, or am I wrong?
Something confusing everything

Develop branch is now Zeus and I hope almost ready for RC1 :)




#1206630 End of Life annoucement

Posted by WTE on 19 May 2020 - 21:59

@WTE

Who is we?
You don't have to do anything?
You want to sell new boxes, nothing more.
Why are you interested in the possible easier access to very good old drivers from Xtrend?
 

 

With my minimal knowledges I try to help and nothing more as I have some time left with the Terrible CoronaVirus but guys like you take out all the fun of it.

If I want to sell only new boxes what you assume why would I spend almost a day for EOL boxes to fix all layers.....




#1204894 Xbox USB Tuner

Posted by WTE on 16 May 2020 - 16:28

Seems all patches are in the vu+ BSP branch. So you need probably to install all packages.


opkg install kernel-module-mn88472

opkg install firmware-mn8847x

opkg install kernel-module-dvb-usb-dib0700

opkg install firmware-dvb-usb-dib0700-1.20

opkg install kernel-module-tda18250




#1144453 Any chance of recovery HD51?

Posted by WTE on 28 December 2019 - 12:39

Press ctrl+c immediately after power on several times.
I don’t know whether it works with bolt bootloaders. I think I never tried it. With old cfe bootloaders it worked.
Maybe WTE can help you and have an idea how to fix your box.

 

It should first been known what really happen. I can say this person tried to load an own bootloader or a loader from a non HD51 model.

This cannot easily been proven without readout of the BOLT bootloader but when this is done then the only solution is to rewrite the BOLT loader by BBS. On the board there are bbs pins which need to been connect.

I cannot imaging it will fail on secondstage loader without temper it. Never say it's not possible but other reason is that spi nor flash is damaged which I actually never seen. Hope the issue can been fixed and never happen again:

 

You should have this parts to write BOLT back into the box.

 

BBS tool (google on cy7c68013a)

Broadband Studio for 7439

BOLT bootloader HD51

Probably only Windows XP or windows 7 for broadcom driver




#1031181 RetroArch - A retrogame emulator on enigma 2

Posted by WTE on 15 March 2019 - 22:43

I assume you used the follow packages for build https://github.com/c...s/meta-libretro

 

I will try next week to build and see if I get it work. Only issue is X11 which I do not prefer :(

I wonder how it will work with remote or that you need a gamepad.




#1020025 Edision Mio 4K, HbbTV, multistreams

Posted by WTE on 20 February 2019 - 16:19

 

 

Astra-sm = ?

 

Op de Mio4k heb je astra-sm enkel nodig met het abertis script, voor het Abertis DTT pakket op 30°W

 

astra-sm en Abertis script... kun je iets meer uitleg geven? Ik zie op S4A dat je een bestandje gepost hebt met abertus dtt. Hoe gebruik/installeer je dit en voor wat?

 

 

 

Ik heb ooit een test voorbeeld gemaakt voor 4.8oost (let niet op zendernamen), dit werkt goed maar beetje omslachtig omdat enigma2 astra-sm niet direct support.

Ik neem aan dat er een software deencapsulatie moet komen welk de gegevens van de transponder in lamedb zet.

De zenderlijst en astrasm waardes lijkt me dat dit simpel via een download script kan installeren.

 

Attached File  t2mi-oekraine.zip   10.8KB   15 downloads




#861179 UP/DOWNLINK 2018, nummer 3, 21 maart 2018

Posted by WTE on 23 March 2018 - 01:45


Maar zodra het gaat over betaalde diensten over IPtv, dan kun je er donder op zeggen dat het illegaal is, om de simpele reden dat het veel te makkelijk is om het de "delen" met anderen. Geen enkele echte provider zal dat in z'n hoofd halen. Er zijn wel legale IPtv diensten, maar die zul je nimmer op je "open" enigma ontvanger kunnen kijken, precies om die reden. In de categorie "if it sounds too good to be true, it probably is". Net als dat er echt geen plugin voor Netflix e.d. zal komen voor enigma.

 

Veel legaal IPTV is al beschikbaar voor een html5 browser met drm ondersteuning.

Kodi (18) en android zijn ook "open" en daar is al Netflix en verschillende legaal IPTV beschikbaar.

 

Als iemand veel tijd over heeft ben ik ervan overtuigd dat het ook gewoon kan werken op een enigma2 ontvanger.

De benodigde Widevine L3 pakket kan je overal vinden voor de armv7 boxen. Widevine L1 zal een stuk moeilijker zijn omdat je dan moet voldoen aan TEE (Trusted Execution Environment).




#857699 Howto build unofficial pli for your unsupported receiver

Posted by WTE on 13 March 2018 - 13:16

How do you overcome this problem?
 

Cloning into 'meta-axasuhd'...
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.
fatal: clone of 'git@github.com:Axas-UHD/meta-axasuhd.git' into submodule path 'meta-axasuhd' failed
Makefile:133: recipe for target 'update' failed
make[1]: *** [update] Error 128

 

change in .gitmodules git@github.com into https://github.com




#811045 Xtrend 10000 bugmelding ook voor de RC 6.1

Posted by WTE on 10 December 2017 - 20:05

Zoals sommige weten was ik vanaf het aller eerste begin distributeur voor Xtrend. Dit is geëindigd nadat bekend en bewezen was dat het Koreaanse bedrijf ook direct goederen heeft geleverd aan een bedrijf in Groningen.

 

Ik krijg vanaf het begin drivers van de ontwikkeling team drivers en daardoor weet ik 100% zeker dat de drivers welk nu worden gebruikt bij Openatv origineel zijn.

In cc zie ik ook dat de drivers destijds naar ene Glen van NexTV is verzonden.

 

NexTV heeft alleen de naam Xtrend gekocht en beheren nu de Xtrend BSP layer.

Het is heel jammer dat Nextv de BSP niet wil updaten en hierdoor Openpli voor Xtrend onbruikbaar is geworden.

 

Gelukkig gebruiken andere images wel de originele nieuwe drivers en kan je beter overstappen naar één van de andere images als je een Xtrend hebt.




#810212 Will PLi be merging the S2X patch

Posted by WTE on 8 December 2017 - 19:47

We were talking of OpenPLi supported receivers ;) The VU+ Zero4k will be the first.

 

Zgemma H7 has DVB-S2x if I am not wrong.
The HD51/VS1500 there is as well a DVB-S2x tuner available ;)

 

Fec goes automatic in most DVB-S2(x) so that's why DVB-S2x works without any adjustment.

The patch is more visual to see your on DVB-S2x transponder and if you have an dvb-s2x tuner or dvb-s2




#738883 New tuner Si2166D- Mut@nt 51HD

Posted by WTE on 13 July 2017 - 15:28


 

Tuner in SF4008 is SI21662, so same tuner chip.

 

SI2166* is demod and the HD51 has a better tuner the RT720. It's actuallly the first dvb s2x compatible tuner/frontend.




#636026 4K vs HD

Posted by WTE on 25 December 2016 - 10:21

Ik heb een UHD Samsung 55" LED TV en wil daar een Vu+ Ultimo 4k hangen. Nu heb ik o.a. een Xtrend ET10k en bevalt eigenlijk best goed.

Mijn vraag is. Is het duidelijk waarneembaar wanneer ik de ET10k vervang voor een ultimo of moet je erg kritisch kijken om het verschil te kunnen zien.

Maw, is het de investering waard.

 

Ik weet dat er nog maar weinig zenders uitzenden in 4k maar ik kan me voorstellen dat HD beeld opgewaardeerd wordt waardoor UHD wordt benaderd.

 

De volgende generatie boxen (medio 2018) hebben pas upscalers naar UHD tevens kan het ook niet VP9-HDR. Desalniettemin geeft de nieuwe chipset standaard een beter beeld. (Nieuwere technieken)

Met het beeld kwaliteit ga je er iets op vooruit. UHD, HDR, HEVC content is er momenteel nog bijna niks en wat gaat dvb-s2x doen.

Ik zou nog even wachten als je 600 euro moet uitgeven...




#615937 backup suite HD51

Posted by WTE on 16 November 2016 - 10:59

WTE

Only ext4 filesystem for device?

 

 

It's an emmc flash. In larger partitions it's quite normal to use ext4.

A smaller partition for like config file then FAT is used.

I do not think we need to experiment with stuff like "btr"




#614992 backup suite HD51

Posted by WTE on 14 November 2016 - 11:22

This script can been used for the more advanced user. It's not yet available as in easy to use plugin.

 

Copy backup.sh in a map.

Set the chmod for execute

chmod 755 backup.sh

run backup.sh and give the destination where the backup image should been placed.

example

./backup.sh /media/hdd/

 

The script will make 3 files rootfs1.bin, kernel1.bin and imageversion in map /hd51/

The 1 behind the name rootfs and kernel name is in which partition you want to place the image in. When you have multiboot partitions installed (like openatv, openvix) then when you want it as second third or fourth image just change the name of kernel and rootf from 1 to 2, 3, or 4.

 

PLEASE been carefull that you load it in the right area, as it will overwrite the old image. You should remove disk.img as this is a complete image which when available it will been only been install and removes all data from emmc flash and makes a complete new partition table. So disk.img a complete new flash and kernel1.bin with kernel2.bin adjust only the image partition and leave other partitions and data blocks alone..

Attached Files