danke, hatte ich auch gemacht. Inzwischen gibts ja neuen Kernel + Treiber, ich hab damit immer noch (bzw. wieder) regelmäßig tune failed. Hast Du auch aktualisiert?
- Forums
- → Bekijkt een profiel: Berichten: mge
ATTENTION !!!
Due to a database corruption issue, we were forced to restore last-nights backup. This means all posts of Saterday Febuary 17th have been lost.Statistieken
- Groep: Senior Member
- Aantal berichten: 102 ( per dag)
- Profiel bekeken: 3979
- Leeftijd: Leeftijd onbekend
- Verjaardag: Verjaardag onbekend
-
Gender
Zeg ik niet
Contactinfomatie
Gebruikersfuncties
Vrienden
mge heeft geen vrienden toegevoegd
Laatste bezoeker
Berichten die ik gemaakt heb
In Topic:Xtrend ET4000 Umschaltzeitenverzögerung und Tunen Fehlgeschlagen
19 november 2014 - 21:09
In Topic:Tune Failed with updated drivers
10 november 2014 - 21:34
et4000 drivers were updated along with kernel
now my "tune failed"errors are back (before I used drivers from 05/2013)
restart enigma or reboot does not help
solution today: shutdown to deep standby ==> reboot
Difference in Logfiles
OK:
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
notOK:
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
[SEC] set dynamic current limiting
(0)fe event: status 20, inversion off, m_tuning 2
FE_TIMEDOUT! ..abort
OURSTATE: failed, retune
(0)tune
Any Ideas?
Thank you
tune_failed_enigmalog.txt 34,91K 2 Aantal bijlagen tune_ok_enigmalog.txt 19,51K 0 Aantal bijlagen
In Topic:HOTKEY - problems / suggestions
5 november 2014 - 21:42
ET4000:TIMER Button does not work. In hotkey config pressing timer button does not jump to timer item.
In Topic:boot from deepstandby boots to standby
23 oktober 2014 - 21:13
workaround works :-) thank you
In Topic:boot from deepstandby boots to standby
22 oktober 2014 - 22:31
never used this option and it is still "Startup to Standby = no"
- Forums
- → Bekijkt een profiel: Berichten: mge