- Forums
- → Bekijkt een profiel: Berichten: Abu Baniaz
ATTENTION !!!
Due to a database corruption issue, we were forced to restore last-nights backup. This means all posts of Saterday Febuary 17th have been lost.Statistieken
-
Groep:
Senior Member
- OthersPLi® Contributor
- Aantal berichten: 2439 ( per dag)
- Profiel bekeken: 13175
- Leeftijd: Leeftijd onbekend
- Verjaardag: Verjaardag onbekend
-
Gender
Undisclosed
Contactinfomatie
Gebruikersfuncties
Laatste bezoeker
Berichten die ik gemaakt heb
In Topic:OpenPLi 9.0 release available
18 april 2024 - 06:08
In Topic:İNVERTO UNİCABLE 2 32 FREKANS LNB TUNER AYARLARINI YAPAMADIM
14 april 2024 - 14:59
In Topic:İNVERTO UNİCABLE 2 32 FREKANS LNB TUNER AYARLARINI YAPAMADIM
9 april 2024 - 18:14
Matrix - This is for selecting a switch. You have an LNB, not a switch
Review - what do you mean?
html attachment - Sorry, I don't understand it
Your attachments are unclear and partial. Why no just take a screenshot of the whole page instead of a picture showing part of the page.
The plain image works with unicable 2. You do not need a backup image. Something is wrong:
What you are doing
Hardware
In Topic:İNVERTO UNİCABLE 2 32 FREKANS LNB TUNER AYARLARINI YAPAMADIM
9 april 2024 - 00:08
Your last description and pictures showed that you have a twin "tuner card" in "tuner slot" A. These are tuners A and B. You had said/showed there was only signal to tuner A.
You had a single "tuner card" in "tuner slot" B. This is tuner C. You had said/showed that there is no wire to it.
You said you had a wire in tuner A. (Top on connection of tuner card in tuner slot A). You said there were no other wires to the duo 2. This means only tuner A should be configured. Leave the other tuners as "not configured" until you get splitters. Best you get one tuner working correctly first.
Tuner configuration must match the hardware connected to each tuner.
In Topic:İNVERTO UNİCABLE 2 32 FREKANS LNB TUNER AYARLARINI YAPAMADIM
8 april 2024 - 21:17
I have said to you several times, do not change the unicable.xml file. Just use the one that comes in the image.
Please describe the current hardware setup. Draw a picture. Do not mention/describe the past. We want to know what we are configuring now. Post a screenshot of the tuner configuration of the duo 2 tuner that is connected to the LNB.
- Forums
- → Bekijkt een profiel: Berichten: Abu Baniaz