Hello again to everyone, lookin forward to your help, if any))
Not long ago I bought a unicable lnb and installed it to a position on my x16 diseqc. I have no problems with zapping but unfortunately when I tried to view 2 channels simultaneously I couldn't do it because of a "tune failed" message. To be more precise, the one channel plays for sm seconds, then the other one plays while I'm getting the tune failed msg and so on.
Do I have to download the “satellite equipment control” plugin and play* with it? [again- I do not have any problems while zapping, the tune failed is displayed when I try to view 2 channels from the unicable lnb sat is installed on]
*PS.: I've read smth about 'unicable delay after enable voltage before switching command' , is this it, or I'm gonna ruin everything else??
IMG_20240429_00.jpg 77,38K
1 Aantal bijlagen
- Forums
- → Bekijkt een profiel: Onderwerpen: GT8k
ATTENTION !!!
Due to a database corruption issue, we were forced to restore last-nights backup. This means all posts of Saterday Febuary 17th have been lost.Statistieken
- Groep: Senior Member
- Aantal berichten: 106 ( per dag)
- Profiel bekeken: 2601
- Leeftijd: Leeftijd onbekend
- Verjaardag: Verjaardag onbekend
-
Gender
Zeg ik niet
Contactinfomatie
2
Neutral
Gebruikersfuncties
Vrienden
GT8k heeft geen vrienden toegevoegd
Laatste bezoeker
Onderwerpen die ik ben begonnen
Unicable lnb & openpli 9
29 april 2024 - 01:41
A little help with drivers
2 maart 2024 - 14:34
Guys I need your help with which drivers to download for the "VU+ HMP-Combo DVB-C/T2 Hybird USB Tuner" and also what's happenin' after the download is complete, should I see a new menu in plugins or I use the tuners&scanning menu?
PS.: I've tried the opticombo one (with the si2168) but don't know how & where to scan for services. IMG_20240302_1.jpg 111,77K 4 Aantal bijlagen IMG_20240302_2.jpg 108,11K 4 Aantal bijlagen IMG_20240302_3.jpg 78,9K 4 Aantal bijlagen
PS.: I've tried the opticombo one (with the si2168) but don't know how & where to scan for services. IMG_20240302_1.jpg 111,77K 4 Aantal bijlagen IMG_20240302_2.jpg 108,11K 4 Aantal bijlagen IMG_20240302_3.jpg 78,9K 4 Aantal bijlagen
Splitscreen mode vu+
21 februari 2024 - 01:41
Hello guys, I desperately need your help in this one:
Is there a way to override the aspect ratio of the 2 images displayed in "picture-in-picture splitscreen mode" [blue button, green, 0] so that they cover all of the height of the tv (as it used to be on my dm8000 using openpli 6.x/7.x) ??!
PS.: now I'm on uno 4kse & openpli-9.0
- Forums
- → Bekijkt een profiel: Onderwerpen: GT8k