sambir

managed to pull 2 more wires.. It was very hard but we have done it...so quattro lnb it is...

2 extra cables,

IDLU-UWT110-CUO1O-32P

cascaded to legacy multiswitch will give me both 32 unicable outputs and (existing 16 legacy from the legacy switch)

i guess thats the cheapest/best solution.

the IDLU-UWT110-CUO1O-32P acting as converter from WIDEBAND to QUATTRO from cascading function is not possible i guess.

I hope i can fit two more cables else i have to check a solution like the triax but with 16 ports where i can use 1 port as unicable and the other ports as legacy.. Triax switch unfortunately doesnt support 32 unicable. the 16 ports variant is very expensive tho...

my initial question was actually. How to achieve this as cheap as possible instead of having to pull two more wires.

 setup1.JPG   34.15KB   0 downloads

Thanks for answering. Then my only option is to add 2 more wires having 4 wires going into IDLU-UWT110-CUO1O-32P allowing the use of unicable 2 function on that switch.

Use the 4 output ports for cascading into a legacy multiswitch with legacy ports to use on older legacy tuners aswell.

too bad there is no single cable solution for legacy tuners...

Inverto has QUATTRO to optical stacker. I was looking for something like that but then for coax.

A stacker is only relevant if you can't pull any extra wires.

 

And it is not exactly clear what your setup is. You talk about a wideband LNB, but that requires two cables, and you mention only one, so do you have a Unicable LNB instead? If so, you can't connect a Unicable LNB to a switch.

Currently i have a 32 lunicable lnb. 1 wire coming from the roof. But i have another backup wire laying around. so i have access to 2 wires.

If i understood mimisiku i could join HL HH with a stacker over 1 wire and VL VH over another wire with another stacker but that means i have to buy two stackers which is around 150 euro.. Maybe its better to just pull two more wires instead and have 4 wires entering the unicable mutliswitch allowing me to passtrough to a legacy switch aswell.