Jump to content


robert_cz

Member Since 8 Dec 2014
Offline Last Active 21 Jan 2018 22:13
-----

Posts I've Made

In Topic: SAT>IP Client for OpenPLi?

30 December 2014 - 16:12

This will explain why it doesn't work. Try with two genuine OpenPLi's (on supported receivers) and then file a complaint. I am not going to spend (more) time to bugs in derived images or drivers for non-supported receivers.

clear, from you I'm expecting only confirmation that in supported devices you do not have this issue.


In Topic: SAT>IP Client for OpenPLi?

30 December 2014 - 15:48

I doubt whether it is relly based on OpenPLi. It is not even MIPSEL.

I suggest that only the image name is based on OpenPLi, not much else. ;)

Yes is based on the source code of OpenPLi, actuality on the source code from  2014-10-31, you can find all distribution history (on Polish :-)) here http://nbox.xunil.pl...ia_aktualizacji

Is based not on MIPSEL, but on SH4.

Can you, please, check if *.ts files are working with switched off tuner and after the hard reboot?

I need this confirmation, because looks that for some reason on my receiver when I'm trying to open *.ts file receiver is using tuner for demux and Video play:

Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux3

In Topic: SAT>IP Client for OpenPLi?

30 December 2014 - 14:03

Yes, playing right now. Setup: VU+ Duo2 with three tuners, all of them disabled ("not configured"), tested with live reception from remote fallback tuner, check - works, went to the recordings directory selected several recordings and they're just playing.

 

Do you have a common/same lamedb between all receivers, what I recommend?

yes I have the same lamedb. Last one doubt, after switching off tuners have you make hard reset?

My receiver is ADB5800xx, and distribution is http://nbox.xunil.pl...aterlia_Project, project page do not have english version :-( is based on Openpli.

 

Possibly is problem with specific hardware.


In Topic: SAT>IP Client for OpenPLi?

29 December 2014 - 19:16

So if I understand you correcty, the problem is like this: You want to play a recording (file.ts) and it only works if the receiver has a satellite tuner connected and enabled. I can't explain that. I've done this so many times. Did you synchronise the lamed (althought that shouldn't even be necessary for this to work). Never pull or insert a satellite cable if the receiver is on, it can damage your tuner!

 

Have you check in your if you have the same, that *.ts files ar not working with disabled satelite tuner?


In Topic: SAT>IP Client for OpenPLi?

23 December 2014 - 23:01

I don't understand? Remote fallback tuner vs. recordings?

 

Please note that not all receivers can record from a http source (be it a remote channel or a fallback tuner). See http://openpli.org/wiki/comparison.

recording, .ts file, was only example of other think that have the same symptoms like remote fallback tuner.
That not working for me.