Jump to content


Photo

Openmultiboot does not work for me.


  • Please log in to reply
4 replies to this topic

#1 foxbob

  • Senior Member
  • 619 posts

+18
Neutral

Posted 2 September 2024 - 18:58

I have a receiver gi et11000 4k.It doesn't have its own multiboot.I decided to try the one on Git.Homemade assembly.The plugin was installed the image was unpacked and after restarting the receiver the box doesn't start.I looked at the startup log via hyperterminal.There is an error there and my knowledge is not enough to fix it.

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 14.2.0 (GCC) ) #1 SMP Sun Sep 1 06:18:58 UTC 2024
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000965fbc
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296816K/1048576K available (6725K kernel code, 288K rwdata, 2080K rodata, 296K init, 187K bss, 735376K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08a19a0   (8807 kB)
      .init : 0xc08a2000 - 0xc08ec000   ( 296 kB)
      .data : 0xc08ec000 - 0xc09343e0   ( 289 kB)
       .bss : 0xc0937000 - 0xc0965fbc   ( 188 kB)
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /usr/src/debug/linux-etxx00/4.1.37/drivers/net/usb/hso.c: Option Wireless
ata1: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hso
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ata2: SATA link down (SStatus 0 SControl 300)
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:04 UTC (4)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
 mmcblk0: p1 p2 p3 p4
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 296K (c08a2000 - c08ec000)
usb 2-1: new SuperSpeed USB device number 2 using xhci-brcm
open-multiboot - debug: omb_utils_init_system            : mountusb-storage 2-1:1.0: USB Mass Storage device detected
 /proc
open-mulscsi host2: usb-storage 2-1:1.0
tiboot - debug: omb_utils_init_system            : mount /sys
open-multiboot - debug: omb_utils_init_system            : mount /media
open-multiboot - debug: omb_utils_init_system            : run volatile media
open-multiboot - debug: omb_utils_init_system            : run mdev
sh: line 1: /etc/init.d/mdev: No such file or directory
scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 15433728 512-byte logical blocks: (7.90 GB/7.36 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
open-multiboot - debug: omb_utils_find_and_mountEXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
         : check device /dev/sda1
open-multiboot - debug: omb_utils_find_and_mount         : found data on device /dev/sda1
open-multiboot - debug: omb_utils_get_images             : discover images
sh: line 1: /usr/lib/enigma2/python/Plugins/Extensions/OpenMultiboot/open-multiboot-menu-helper.py: No such file or directory
init: /usr/src/debug/json-c/0.17/json_object.c:1513: json_object_array_length: Assertion `json_object_get_type(jso) == json_type_array' failed.
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.37 #1
Hardware name: Broadcom STB (Flattened Device Tree)
[<c001761c>] (unwind_backtrace) from [<c00135f4>] (show_stack+0x10/0x14)
[<c00135f4>] (show_stack) from [<c0665c90>] (dump_stack+0x7c/0x90)
[<c0665c90>] (dump_stack) from [<c00163b8>] (handle_IPI+0x154/0x188)
[<c00163b8>] (handle_IPI) from [<c00093cc>] (gic_handle_irq+0x5c/0x60)
[<c00093cc>] (gic_handle_irq) from [<c0014000>] (__irq_svc+0x40/0x54)
Exception stack(0xd1c89f80 to 0xd1c89fc8)
9f80: 00000001 00000000 00000000 c0021e20 00000000 00000001 00000000 d1c88000
9fa0: d1c89fd0 c08e8e88 c08ee4e8 c08e6324 00000000 d1c89fc8 c001111c c0011120
9fc0: 60080013 ffffffff
[<c0014000>] (__irq_svc) from [<c0011120>] (arch_cpu_idle+0x38/0x3c)
[<c0011120>] (arch_cpu_idle) from [<c0057dfc>] (cpu_startup_entry+0x248/0x2cc)
[<c0057dfc>] (cpu_startup_entry) from [<0000946c>] (0x946c)
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004


Re: Openmultiboot does not work for me. #2 Abu Baniaz

  • PLi® Contributor
  • 2,490 posts

+64
Good

Posted 2 September 2024 - 19:00

You might have more luck having OpenATV as the image on internal flash.


Edited by Abu Baniaz, 2 September 2024 - 19:01.


Re: Openmultiboot does not work for me. #3 foxbob

  • Senior Member
  • 619 posts

+18
Neutral

Posted 2 September 2024 - 19:05

I would like OpenPLI to be in flash.



Re: Openmultiboot does not work for me. #4 Abu Baniaz

  • PLi® Contributor
  • 2,490 posts

+64
Good

Posted 2 September 2024 - 19:08

If you check all the other threads about OpenMultiboot plugin, you will realise that it has seldom ever worked with PLI in flash image. PLi do not support it.



Re: Openmultiboot does not work for me. #5 Dimitrij

  • PLi® Core member
  • 10,203 posts

+346
Excellent

Posted 3 September 2024 - 05:55

Yes,first testing OpenMultiboot(O-E version in feed) when use OpenATV as the image on internal flash.


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users