104 replies to this topic

[WanWizard]

I've seen that one before, it is one of the many race conditions that exist in vendor BSP's.

 

The problem here is that recovery.bin is installed in zgemma-recovery-3798mv310, but if that isn't built first, or you've cleaned up and bitbake doesn't run it again, you get this issue.

 

You  could try fixing by running it manually

machine=h11 bitbake -f -c build zgemma-recovery-3798mv310

 

[levi45@]

 

I've seen that one before, it is one of the many race conditions that exist in vendor BSP's.

 

The problem here is that recovery.bin is installed in zgemma-recovery-3798mv310, but if that isn't built first, or you've cleaned up and bitbake doesn't run it again, you get this issue.

 

You  could try fixing by running it manually

machine=h11 bitbake -f -c build zgemma-recovery-3798mv310

Thank you but when i try that command gives this error

bitbake: command not found

[WanWizard]

You might have to source env.source first, to get your environment setup.

[levi45@]

You might have to source env.source first, to get your environment setup.

Sorry im not sure how to do that please can you advice thanks .

[WanWizard]

cd /home/mypc/openpli-oe-core/build
source env.source
machine=h11 bitbake -f -c build zgemma-recovery-3798mv310

 

[levi45@]

cd /home/mypc/openpli-oe-core/build
source env.source
machine=h11 bitbake -f -c build zgemma-recovery-3798mv310

Thanks so gives this error , witch one  shall i do and how

 

ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    Please set a MACHINE in your local.conf or environment

 

 

Edited by levi45@, 13 November 2024 - 19:12.

[levi45@]

Its ok now find it out thank you @WanWizard

[WanWizard]

Yeah, sorry, MACHINE and not machine...

[levi45@]

@WanWizard you cant reach to this file anymore

 Screenshot from 2024-11-23 15-30-47.png   18.69KB   0 downloads

[WanWizard]

What are you trying to do? Why are you downloading that?

 

The files are only to be used by the epgimport plugin. There is no need to access that interactively, and I don't know about other mirrors, but my mirror blocks such requests.

 

Also, not related to any build issues, please don't hijack the topic for something else.

[levi45@]

What are you trying to do? Why are you downloading that?

 

The files are only to be used by the epgimport plugin. There is no need to access that interactively, and I don't know about other mirrors, but my mirror blocks such requests.

 

Also, not related to any build issues, please don't hijack the topic for something else.

Im not hijacking the topic (its actually upset me you said that) That's actually building issue.  Im not trying to download that file that was only for you to see issue 

first you get this warning

 

WARNING: enigma2-plugin-extensions-epgimport-rytec-20241009-r0 do_fetch: Failed to fetch URL http://rytecepg.wanw...xml.20241009.gz, attempting MIRRORS if available

 

then you get this  erorr

 

 

ERROR: enigma2-plugin-extensions-epgimport-rytec-20241009-r0 do_fetch: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/mypc/openpli-oe-core/openembedded-core/scripts:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot-native/usr/bin/allarch-oe-linux:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot/usr/bin/crossscripts:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot-native/usr/sbin:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot-native/usr/bin:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot-native/sbin:/home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/recipe-sysroot-native/bin:/home/mypc/openpli-oe-core/bitbake/bin:/home/mypc/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/mypc"; /usr/bin/env wget -t 2 -T 30 -O /home/mypc/openpli-oe-core/sources/rytec.sources.xml.20241009.gz.tmp -P /home/mypc/openpli-oe-core/sources 'http://rytecepg.wanw...xml.20241009.gz' --progress=dot -v failed with exit code 8, see logfile for output
ERROR: enigma2-plugin-extensions-epgimport-rytec-20241009-r0 do_fetch: Bitbake Fetcher Error: FetchError('Unable to fetch URL from any source.', 'http://rytecepg.wanw...l.20241009.gz')
ERROR: Logfile of failure stored in: /home/mypc/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-extensions-epgimport-rytec/20241009/temp/log.do_fetch.7113
ERROR: Task (/home/mypc/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-epgimport-rytec.bb:do_fetch) failed with exit code '1'

 

Edited by levi45@, 23 November 2024 - 18:06.

[WanWizard]

Huh? Where in the build is that downloaded?

 

Ah, I now see doglover is using my mirror in the build recipe.  That should not be an issue, it is cloud CDN, it should be available for normal downloads.

 

I'll have a look...

[WanWizard]

Should be fixed now ?

[levi45@]

I can confirm now is fixed thanks.

[WanWizard]

You've just beaten me, I just saw the request come in...

x.x.x.x - - [23/Nov/2024:21:33:06 +0000] "GET /rytec.sources.xml.20241009.gz HTTP/1.1" 200 3168 "-" "Wget/1.21.4" "-" upstream_status=304 request_time=0.040 upstream_response_time=0.040 upstream_connect_time=0.019 upstream_header_time=0.040

[FRAP]

Hello, it's spring. My screen's turning green.

 

Attached Files

•  enigma2_crash_1732447949.log   13.88KB   0 downloads
•  enigma2_crash_1732448010.log   3.28KB   0 downloads
•  enigma2_crash_1732448118.log   3.28KB   0 downloads
•  enigma2_crash_1732448010.log   3.28KB   1 downloads

[FRAP]

replaced Picon.py

 and the problem disappeared

[WanWizard]

for others: this is the fix; https://github.com/O...c8c1d7cc6949685

[levi45@]

Just to quick question if i custom build image from develop branch.  And if i build with different skin rather than the  default skin i cannot see the blue (next wizard)  button on the first time setup wizard  . Where should i look in to  for this issue many thanks.

[WanWizard]

Have you included a build recipe for that other skin? Is it built correctly? Did you add that recipe to the image dependencies so it is included in the image file?