72 replies to this topic

[piplan1966]

see this

Attached Files

•  Capture.PNG   41.01KB   1 downloads

[WanWizard]

If you have a USB disk, it is mounted on /media/usb.

[piplan1966]

Hi
I've made changes, now it saves.
But timeshift is not active,
Show this picture

Attached Files

•  Capture.PNG   43.43KB   0 downloads

[WanWizard]

What do you mean with "active"?

 

If you want timeshift to automatically start after each zap, you need to configure that too.

 

Menu - Setup - System - GUI Settings - "Automatically start timeshift after".

[piplan1966]

Active means now if I save the recording path, it gets saved.

[piplan1966]

Hi
Have I done this setting correctly?
Look at this

Attached Files

•  Capture.PNG   138.44KB   0 downloads

[littlesat]

The screenshot indicates the timeshift will be recoded at the root which is flash and this is quickly full and will cause errors due to a full flash.
When the drive is not writable it is likely corrupted. Please solve the corrupted stuff or reformat is.

Edited by littlesat, 14 November 2024 - 07:30.

[piplan1966]

Hi
If the timeshift is activated, where will the show be in the receiver?

[ims]

Timeshift - the current program starts recording and simultaneously pauses (this may take about 2 seconds). You see the paused program, which you can then continue watching, rewind, or play in slow motion. What more would you like to see? Permanent timeshift (which needs to be enabled) means that when you switch to a service, recording automatically starts in the background.

[piplan1966]

I think the time shift is now activated,
Look at this

Attached Files

•  Capture.PNG   1.09MB   0 downloads

[piplan1966]

Hi
I have factory reset the receiver and deleted some redundant stuff,
And media/usb is written in place of media/hdd,
Now I can pause and play the movie while recording and play it in slow motion at 2.4.8.
Let me show you a picture

Attached Files

•  Capture.PNG   38.99KB   0 downloads

[piplan1966]

Hi
You guys answered my every question and guided me again and again.
My prayers are with you guys.
Thank you all very much,
good luck

[Pr2]

Seems that / is missing in your movie location I think it should be:  /media/usb/ and not /mediausb/

[piplan1966]

Hi
This is what I wrote with the remote,
On the remote it's not / so I wrote mediausb,

[piplan1966]

Hi
Now I have written /media/usb/,
this see

Attached Files

•  Capture.PNG   40.37KB   0 downloads

[WanWizard]

Just wondering: How have you managed to "type" anything in there, as it is a bookmark selection field ( using left/right no navigate though your bookmarks, or press Ok to select a location ) ?

[piplan1966]

Hi
Here media/hdd was already written,
But I am using USB so I wrote /media/usb/

[WanWizard]

How? It is not an input field, you can't write anything there.

[piplan1966]

Hi
That's what you told me in #42

[WanWizard]

I think we're getting lost in translation.

 

You wrote you "wrote it with the remote", which I don't understand, as it is no input field, but a select field. You can not write anything, you can only select.