31 replies to this topic

[Stan]

I am trying to install the PLi develop version on my ET9200.

 

After flashing the image, I'm encoutering some problems:

 

1. Installation wizard - the wrong remote control is shown (silver dream RC)

2. AutoDiseqc detection of satellites is very poor. After multiple tries it may find one (out of four)

3. During restoring  the backup and plugins I got errors, causing a boot loop.

Downloading http://downloads.openpli.org/feeds/openpli-develop/mips32el/libsmartcols1_2.36.2-r0.9_mips32el.ipk.
Configuring libsmartcols1.
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-certifi'.
An error occurred during installing python-certifi - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-chardet'.
An error occurred during installing python-chardet - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-image'.
An error occurred during installing python-image - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-imaging'.
An error occurred during installing python-imaging - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-mutagen'.
An error occurred during installing python-mutagen - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-ndg-httpsclient'.
An error occurred during installing python-ndg-httpsclient - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-pysocks'.
An error occurred during installing python-pysocks - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-pyusb'.
An error occurred during installing python-pyusb - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-requests'.
An error occurred during installing python-requests - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-simplejson'.
An error occurred during installing python-simplejson - Please try again later
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python-urllib3'.
An error occurred during installing python-urllib3 - Please try again later
Installing util-linux-sfdisk (2.36.2) on root
Downloading http://downloads.openpli.org/feeds/openpli-develop/mips32el/util-linux-sfdisk_2.36.2-r0.9_mips32el.ipk.
Configuring util-linux-sfdisk.

I did not have any of the above during installation on my OSmio.

Edited by Stan, Today, 12:53.

[Frenske]

I don’t expect that this issue will actually being solved as none of our members still has an Xtrend et9200 and the need to solve this cosmetic problem is minor IMHO.

[WanWizard]

These messages indicate a local issue on the box, it can't find the packages in the package indexes in /var/lib/opkg, so it can't assemble a URL to download.

 

Since this is all prefixed with "python-* instead of "python3-*", you're installing something that is outdated and has python2 dependencies.

 

Please check the log to see which package triggered these messages.

[Stan]

I made a backup of the box (including autoinstall) before the upgrade.

The box had PLi 8.3. Restoring the backup in PLi9 is obviously causing a problem.

 

These are the contents of autoinstall:

enigma2-plugin-extensions-lcd4linux
enigma2-plugin-extensions-shoutcast
enigma2-plugin-extensions-werbezapper
enigma2-plugin-systemplugins-mountmanager
libdvbcsa1
libfdisk1
libmad0
libsmartcols1
libudev1
libusb-0.1-4
libusb-1.0-0
png-util
pydpflib
python-certifi
python-chardet
python-image
python-imaging
python-mutagen
python-ndg-httpsclient
python-pysocks
python-pyusb
python-requests
python-simplejson
python-urllib3
softcam-support
streamripper
util-linux-sfdisk

Why are all these dependant packages listed in autoinstall? Will they not be installed with the plugins anyway?

Edited by Stan, Today, 13:47.

[WanWizard]

Ok, so it is actually not an issue these are skipped, this happens all the time when restoring an old backup on a new major release.

 

The autoinstall file is created by making a diff between the list of packages the image comes with, and the list of packages at the time of the backup.

There is no way of knowing how a package is installed, it could be a plugin, a driver, a standalone package like openvpn, anything.

 

So these errors are cosmetic. But they may not cause a boot loop, so the question is, what causes that?

 

[Stan]

Must be something in the restored configs...

Traceback (most recent call last):
  File "/usr/lib/enigma2/python/StartEnigma.py", line 27, in <module>
    from Screens import InfoBar
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 129, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 68, in __init__
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 77, in loadResumePoints
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 159: ordinal not in range(128)

 

[WanWizard]

It reads "/etc/enigma2/resumepoints.pkl" there.

 

The problem is probably that pickle data is binary, which is not a problem in Python2 as everything is "bytes", but in python3 to store it in an "str" you need to know the encoding of the data stored.

 

Can you send me your resumepoints.pkl, ideally from the backup tarball so I know it isn't altered in the meantime, so I can do some tests?

[Stan]

[attachment=172195:resumepoints.zip]

[WanWizard]

Thanks, I'll have a look.

[Stan]

Thanks.

Please delete the zip-file from my post after download.

[WanWizard]

Fixed: https://github.com/O...6715c2c978813de

[Stan]

Thanks. No more boot loops now.

 

What about the odd remote control? The Web Interface has got the right one, but the Help screen shows a dream RC. (default?)

Edited by Stan, Today, 16:12.

[WanWizard]

No idea how that is done, and at the moment no time to dive into that.

 

Perhaps @Tech can have a look?

[littlesat]

To get the correct remote control we should probably postpone for OpenPLi 10... there are more remotes that are not correctly and maybe for some boxes we need to add a kind of selection in the wizard and maybe also somewhere in a menu.... No idea yet to make this really 'smart and smooth'.

Edited by littlesat, Today, 17:10.

[Stan]

In version 8.3 the RC was detected correctly. What happened in 9.1?

[Dimitrij]

8.3 the RC use --> https://github.com/O...wareInfo.py#L66

9.1 use --> https://github.com/O...wareInfo.py#L43

[littlesat]

The incorrect remote looks a mistake from the (new) boxinfo stuff.... Needs to be resolved when the image is build (enigma2.info file is build)

[WanWizard]

Since when is remote info from boxinfo used? That isn't configured in the BSP's at all.

[WanWizard]

p.s. 9.1 isn't ready yet, still being worked on, and not online yet. Did you make a homebuild?

 

Can you post the /var/lib/enigma.info file from your box? And the result of

grep -r "" /proc/stb

Chances are all that hardcoded detection stuff that was in 8.3 hasn't been ported to enigma-info.

Edited by WanWizard, Today, 18:36.

[Stan]

It's not homebuild. Original PLi, latest develop image (the future 9.1?)

root@et9x00:/proc/stb# grep -r "" /proc/stb
/proc/stb/hdmi/preemphasis_choices:off on
/proc/stb/hdmi/preemphasis:off
/proc/stb/ir/rc/type:11
/proc/stb/lcd/show_outputresolution:0
/proc/stb/lcd/symbol_recording:0
/proc/stb/lcd/symbol_playback:0
/proc/stb/lcd/symbol_ac3:0
/proc/stb/lcd/symbol_mute:0
/proc/stb/lcd/symbol_smartcard:0
/proc/stb/lcd/symbol_scrambled:0
/proc/stb/lcd/symbol_timeshift:0
/proc/stb/lcd/symbol_tv:0
/proc/stb/lcd/symbol_signal:0
/proc/stb/lcd/symbol_usb:0
/proc/stb/lcd/symbol_network:0
/proc/stb/lcd/symbol_hddprogress:0
/proc/stb/lcd/symbol_hdd:0
/proc/stb/lcd/scroll_repeats:3
/proc/stb/lcd/final_scroll_delay:1000
/proc/stb/lcd/initial_scroll_delay:1000
/proc/stb/lcd/scroll_delay:150
/proc/stb/lcd/show_symbols:1
/proc/stb/lcd/oled_brightness:255
/proc/stb/overlay/dst_apply:1
/proc/stb/overlay/dst_height:00000240
/proc/stb/overlay/dst_width:000002d0
/proc/stb/overlay/dst_top:00000000
/proc/stb/overlay/dst_left:00000000
/proc/stb/fb/znorm:0
/proc/stb/fb/3dmode_choices:off auto sidebyside topandbottom
/proc/stb/fb/3dmode:auto
/proc/stb/fb/dst_apply:1
/proc/stb/fb/dst_height:00000240
/proc/stb/fb/dst_width:000002d0
/proc/stb/fb/dst_top:00000000
/proc/stb/fb/dst_left:00000000
/proc/stb/fp/was_timer_wakeup:0
/proc/stb/fp/wakeup_time:0
/proc/stb/fp/rtc:0
/proc/stb/fp/lnb_sense1:-1
/proc/stb/fp/lnb_sense0:-1
/proc/stb/fp/temp_sensor:0
/proc/stb/fp/fan_choices:off on auto
/proc/stb/fp/fan:off
/proc/stb/tsmux/ci1_tsclk_choices:normal
/proc/stb/tsmux/ci0_tsclk_choices:normal
/proc/stb/tsmux/ci1_tsclk:high
/proc/stb/tsmux/ci0_tsclk:high
/proc/stb/tsmux/input1_choices:CI0 CI1 A B C
/proc/stb/tsmux/input0_choices:CI0 CI1 A B C
/proc/stb/tsmux/input1:B
/proc/stb/tsmux/input0:A
/proc/stb/tsmux/ci1_input_choices:A B C
/proc/stb/tsmux/ci0_input_choices:A B C
/proc/stb/tsmux/ci1_input:A
/proc/stb/tsmux/ci0_input:A
/proc/stb/vmpeg/deinterlace_choices:off on auto bob
/proc/stb/vmpeg/deinterlace:auto
/proc/stb/vmpeg/1/external_choices:off on
/proc/stb/vmpeg/1/external:off
/proc/stb/vmpeg/1/fallback_framerate_choices:unknown 23976 24000 25000 29970 30000 50000 59940 60000
/proc/stb/vmpeg/1/fallback_framerate:60000
/proc/stb/vmpeg/1/progressive_override_choices:disable top_bottom bottom_top
/proc/stb/vmpeg/1/progressive_override:top_bottom
/proc/stb/vmpeg/1/yres:0
/proc/stb/vmpeg/1/xres:0
/proc/stb/vmpeg/1/aspect:2
/proc/stb/vmpeg/1/framerate:0
/proc/stb/vmpeg/1/progressive:0
/proc/stb/vmpeg/1/clip_stretch:0
/proc/stb/vmpeg/1/clip_apply:1
/proc/stb/vmpeg/1/clip_height:00000240
/proc/stb/vmpeg/1/clip_width:000002d0
/proc/stb/vmpeg/1/clip_top:00000000
/proc/stb/vmpeg/1/clip_left:00000000
/proc/stb/vmpeg/1/dst_apply:1
/proc/stb/vmpeg/1/dst_height:00000240
/proc/stb/vmpeg/1/dst_width:000002d0
/proc/stb/vmpeg/1/dst_top:00000000
/proc/stb/vmpeg/1/dst_left:00000000
/proc/stb/vmpeg/0/fallback_framerate_choices:unknown 23976 24000 25000 29970 30000 50000 59940 60000
/proc/stb/vmpeg/0/fallback_framerate:60000
/proc/stb/vmpeg/0/progressive_override_choices:disable top_bottom bottom_top
/proc/stb/vmpeg/0/progressive_override:top_bottom
/proc/stb/vmpeg/0/yres:2d0
/proc/stb/vmpeg/0/xres:500
/proc/stb/vmpeg/0/aspect:3
/proc/stb/vmpeg/0/framerate:50000
/proc/stb/vmpeg/0/progressive:1
/proc/stb/vmpeg/0/clip_stretch:0
/proc/stb/vmpeg/0/clip_apply:1
/proc/stb/vmpeg/0/clip_height:00000240
/proc/stb/vmpeg/0/clip_width:000002d0
/proc/stb/vmpeg/0/clip_top:00000000
/proc/stb/vmpeg/0/clip_left:00000000
/proc/stb/vmpeg/0/dst_apply:1
/proc/stb/vmpeg/0/dst_height:00000240
/proc/stb/vmpeg/0/dst_width:000002d0
/proc/stb/vmpeg/0/dst_top:00000000
/proc/stb/vmpeg/0/dst_left:00000000
/proc/stb/vmpeg/0/pep_deinterlacer_sharpness:0000000d
/proc/stb/vmpeg/0/pep_hscaler_sharpness:0000000d
/proc/stb/vmpeg/0/pep_scaler_sharpness:0000000D
/proc/stb/vmpeg/0/pep_dynamic_contrast:00000000
/proc/stb/vmpeg/0/pep_blue_boost:00000000
/proc/stb/vmpeg/0/pep_green_boost:00000000
/proc/stb/vmpeg/0/pep_auto_flesh:00000000
/proc/stb/vmpeg/0/pep_sharpness:00000000
/proc/stb/vmpeg/0/pep_split:off
/proc/stb/vmpeg/0/pep_mosquito_noise_reduction:00000000
/proc/stb/vmpeg/0/pep_digital_contour_removal:00000000
/proc/stb/vmpeg/0/pep_block_noise_reduction:00000000
/proc/stb/vmpeg/0/pep_brightness:00000000
/proc/stb/vmpeg/0/pep_hue:00000000
/proc/stb/vmpeg/0/pep_saturation:00000000
/proc/stb/vmpeg/0/pep_contrast:00000000
/proc/stb/vmpeg/0/pep_apply:00000001
/proc/stb/denc/0/wss:auto
/proc/stb/avs/0/volume:16
/proc/stb/avs/0/sb:auto
/proc/stb/avs/0/sb_choices:0 6 12 auto vcr
/proc/stb/avs/0/colorformat:cvbs
/proc/stb/avs/0/input:encoder
/proc/stb/avs/0/input_choices:encoder scart aux
/proc/stb/stc/1/sync_choices:auto video audio firstavailable
/proc/stb/stc/1/sync:auto
/proc/stb/stc/0/sync_choices:auto video audio firstavailable
/proc/stb/stc/0/sync:auto
/proc/stb/video/snapshot_size:40x24
/proc/stb/video/monitor_modes:10        1920x1080p 59.94Hz/60Hz
/proc/stb/video/monitor_modes:1f        1920x1080p 50Hz
/proc/stb/video/monitor_modes:04        1280x720p  59.94Hz/60Hz
/proc/stb/video/monitor_modes:13        1280x720p 50Hz
/proc/stb/video/monitor_modes:05        1920x1080i  59.94Hz/60Hz
/proc/stb/video/monitor_modes:14        1920x1080i 50Hz
/proc/stb/video/monitor_modes:03        720x480p  59.94Hz/60Hz
/proc/stb/video/monitor_modes:12        720x576p 50Hz
/proc/stb/video/monitor_modes:20        1920x1080p 23.97Hz/24Hz
/proc/stb/video/monitor_modes:21        1920x1080p 25Hz
/proc/stb/video/monitor_modes:22        1920x1080p 29.97Hz/30Hz
/proc/stb/video/zapmode:mute
/proc/stb/video/zapmode_choices:mute hold mutetilllock holdtilllock
/proc/stb/video/alpha:255
/proc/stb/video/videomode_60hz:1080i50
/proc/stb/video/videomode_50hz:1080i50
/proc/stb/video/videomode:1080i50
/proc/stb/video/videomode_preferred:1080p 1080p50 720p 720p50 1080i 1080i50 480p 576p 1080p24 1080p25 1080p30
/proc/stb/video/videomode_60hz_choices:pal ntsc 720p 720p24 720p25 720p30 720p50 3d720p 3d720p50 1080i 1080i50 1080p24 1080p25 1080p30 3d1080p24 576i 576p 480i 480p
/proc/stb/video/videomode_50hz_choices:pal ntsc 720p 720p24 720p25 720p30 720p50 3d720p 3d720p50 1080i 1080i50 1080p24 1080p25 1080p30 3d1080p24 576i 576p 480i 480p
/proc/stb/video/videomode_choices:pal ntsc 720p 720p24 720p25 720p30 720p50 3d720p 3d720p50 1080i 1080i50 1080p24 1080p25 1080p30 3d1080p24 576i 576p 480i 480p
/proc/stb/video/policy2_choices:auto bestfit letterbox panscan nonlinear policy
/proc/stb/video/policy_choices:auto bestfit letterbox panscan nonlinear
/proc/stb/video/policy2:letterbox
/proc/stb/video/policy:panscan
/proc/stb/video/aspect:16:9
/proc/stb/audio/j1_mute:0
/proc/stb/audio/audio_delay_bitstream:0
/proc/stb/audio/audio_delay_pcm:0
/proc/stb/audio/dts:downmix
/proc/stb/audio/dts_choices:downmix passthrough
/proc/stb/audio/ac3:downmix
/proc/stb/audio/ac3_choices:downmix passthrough
/proc/stb/info/release:1606
/proc/stb/info/version:2
/proc/stb/info/board_revision:97
/proc/stb/info/chipset:bcm7405
/proc/stb/info/model:dm800se
/proc/stb/info/boxtype:et9200
/proc/stb/frontend/0/static_current_limiting_choices:off on
/proc/stb/frontend/0/static_current_limiting:off
root@et9x00:/proc/stb#

Edited by Stan, Today, 18:53.