Posted Today, 18:23
Hey all! Ok as the subject of this message says I'm having trouble with openvpn on openpli for edision mini. Originally i used this to get it working:
opkg update
opkg upgradeopkg install openvpndownload expressvpn openvpn filerename to client.confcopy username and passowrd to login.txt fileadd login.txt to client.confadd to enigma /etc/openvpnreboot
Well i recently due to a failure of some sort had to update my openpli but now i can't get openvpn to work. Can anyone help me out?
Posted Today, 18:25
My chrystal ball is being serviced at the moment. Please provide the openvpn logs.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 18:54
hi WanWizard. newb question, Where do i obtain that particular file???? (Cool name by the way)
Posted Today, 19:00
oops!!! I think i may have murdered my edision os mini!!! 
I shouldn't laugh but based on everything I've thrown at it lately it's not surprising it died a death. I'm just gonna download the current openpli and try flashing it again. I'll get back to you as soon as i have it up and running. Apologies WnaWizard!
Bare with me!!!
Posted Today, 19:09
Quite an achievement, murdering a box... 
For next time, first port of call is /var/log/messages. Chances are there is a config error that prevents openvpn from starting, for example something that has been deprecated in a newer version.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 19:21
phew!! got the new os installed. I've installed version OpenVPN 2.6.2. i have the ovpn file and the login.txt file from expressvpn. i've modded the conf file to add auth.txt. What should i do next?
Posted Today, 19:33
ok after all that I'm still getting my actual ip address using wget -qO- http://ipecho.net/plain;echo
Posted Today, 19:46
Is openvpn running?
\etc\init.d\openvpn status
is a tap or tun interface created?
ifconfig
Anything in /var/log/messages?
If it isn't running, do you get an error message when you start it?
/etc/init.d/openvpn start
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 19:55
ok /etc/init.d/openvpn status gives me the following:
/etc/init.d/openvpn status
root@osmini:/etc/openvpn# 2024-12-18 18:54:00 WARNING: file 'auth.txt' is group or others accessible
2024-12-18 18:54:00 OpenVPN 2.6.2 mipsel-oe-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
2024-12-18 18:54:00 library versions: OpenSSL 1.1.1n 15 Mar 2022, LZO 2.10
2024-12-18 18:54:00 WARNING: --ns-cert-type is DEPRECATED. Use --remote-cert-tls instead.
2024-12-18 18:54:01 TCP/UDP: Preserving recently used remote address: [AF_INET]185.192.16.209:1195
2024-12-18 18:54:01 Socket Buffers: R=[196608->393216] S=[196608->393216]
2024-12-18 18:54:01 UDPv4 link local: (not bound)
2024-12-18 18:54:01 UDPv4 link remote: [AF_INET]185.192.16.209:1195
2024-12-18 18:54:01 TLS: Initial packet from [AF_INET]185.192.16.209:1195, sid=9fb2918c 1f311e98
2024-12-18 18:54:01 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
2024-12-18 18:54:01 VERIFY OK: depth=1, C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=ExpressVPN CA, emailAddress=support@expressvpn.com
2024-12-18 18:54:01 VERIFY OK: nsCertType=SERVER
2024-12-18 18:54:01 VERIFY X509NAME OK: C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=Server-11949-0a, emailAddress=support@expressvpn.com
2024-12-18 18:54:01 VERIFY OK: depth=0, C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=Server-11949-0a, emailAddress=support@expressvpn.com
2024-12-18 18:54:01 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 2048 bit RSA, signature: RSA-SHA256
2024-12-18 18:54:01 [Server-11949-0a] Peer Connection Initiated with [AF_INET]185.192.16.209:1195
2024-12-18 18:54:01 TLS: move_session: dest=TM_ACTIVE src=TM_INITIAL reinit_src=1
2024-12-18 18:54:01 TLS: tls_multi_process: initial untrusted session promoted to trusted
2024-12-18 18:54:02 SENT CONTROL [Server-11949-0a]: 'PUSH_REQUEST' (status=1)
2024-12-18 18:54:02 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.111.0.1,comp-lzo no,route-gateway 10.111.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.111.0.79 255.255.0.0,peer-id 84,cip
her AES-256-GCM,protocol-flags cc-exit tls-ekm dyn-tls-crypt,tun-mtu 1500'
2024-12-18 18:54:02 OPTIONS IMPORT: --ifconfig/up options modified
2024-12-18 18:54:02 OPTIONS IMPORT: route options modified
2024-12-18 18:54:02 OPTIONS IMPORT: route-related options modified
2024-12-18 18:54:02 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
2024-12-18 18:54:02 OPTIONS IMPORT: tun-mtu set to 1500
2024-12-18 18:54:02 ROUTE_GATEWAY 192.168.1.254/255.255.255.0 IFACE=eth0 HWADDR=7c:c7:0a:06:2d:c6
2024-12-18 18:54:02 ERROR: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)
2024-12-18 18:54:02 Exiting due to fatal error
Posted Today, 19:57
ifconfig gives me the following:
ifconfig
eth0 Link encap:Ethernet HWaddr 7C:C7:0A:06:2D:C6
inet addr:192.168.1.165 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2001:bb6:6258:f800:7ec7:aff:fe06:2dc6/64 Scope:Global
inet6 addr: fe80::7ec7:aff:fe06:2dc6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50149 errors:0 dropped:205 overruns:0 frame:0
TX packets:9052 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:69283928 (66.0 MiB) TX bytes:803412 (784.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5984 (5.8 KiB) TX bytes:5984 (5.8 KiB)
Posted Today, 19:58
i won't even pretend to say i know what I'm doing. I can however follow directions quite well.
Posted Today, 20:06
tun device is missing:
2024-12-18 18:54:02 ERROR: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)
I assume you installed openvpn from the feed, and not from some external source? Because we've addressed this in our startup scripts?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 20:11
Sorry WanWizard but you've lost me...i basically just ran opkg install openvpn. How do i go about installing from the feed? I never had this problem in the past. Please keep in mind I'm fairly new to this. Please advise me on what i need to do next?
Posted Today, 20:19
If you installed it from the feed (like you say you did), the startup script should create the device.
You can try to do it manually:
modprobe tun
if it gives an error, try
opkg install kernel-module-tun
followed again by the modprobe command.
if that doesn't give you errors, continue with
ls -l /dev/net/tun
if you get back that this does not exist, execute
mknod /dev/net/tun c 10 200 chmod 600 /dev/net/tun
then restart the box, and use
ifconfig
to check if you now have a tun interface
Edited by WanWizard, Today, 20:32.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 20:19
You said it worked before, so the kernel of the box should support the tun kernel module.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted Today, 20:25
root@osmini:~# mknod /dev/net/tun c 10 200
mknod: /dev/net/tun: File exists
root@osmini:~# chmod 600 /dev/net/tu
chmod: /dev/net/tu: No such file or directory
i'm in WAY over my head on this one!
Posted Today, 20:30
the openvpn command gives me a LOT of info, the main one is
OpenVPN 2.6.2 mipsel-oe-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
not really sure if that's relavent but i thought I'd throw it in.
Posted Today, 20:32
root@osmini:~# chmod 600 /dev/net/tu
chmod: /dev/net/tu: No such file or directory
this error is clear the device is called tun and not tu, so use that instead;
root@osmini:~# chmod 600 /dev/net/tun
regards
Pike
Edited by Pike_Bishop, Today, 20:35.
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
Posted Today, 20:33
ok openvpn --status gives me this error message:
Options error: Unrecognized option or missing or extra parameter(s) in [CMD-LINE]:1: status (2.6.2)
I'm confused to say the least.....
Posted Today, 20:34
Huh?
How is it that "mknod" says it already exists, but "chmod" says it doesn't? Was there a reboot in between?
What does "lsmod" say, is "tun" in the list?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 4 guests, 0 anonymous users
