60 replies to this topic

[Barretski]

Just so I understand, you're saying I'm to watch a channel and while doing so using EPG start recording (timer type record) on another channel where both channels require CI?

Had to change a couple of settings (no prio, ignore conflict) to allow that but seems to work.

Well need to run offline decode to watch anything I suppose since recorded with ecm to black screen etc. Yup, decode worked.

Edited by Barretski, Yesterday, 17:13.

[ghuss]

Zap and record is working well without crashing

[dumbenis]

OpenPLi 9.1 Crash (in line with the crash report of ghuss of 28 December 2024 - 16:28):

 

The display of the Mutant HD2400 receiver was out, which is not normal and the receiver was unresponsive. After rebooting the receiver, it crashed and continued to restart and crash on itself. After many automatic restarts and crashes, the receiver reported a conflict with timers and started to work properly after OK. See crash log up:

 

OpenPLi Enigma2 crash log

crashdate=do jan  9 23:14:35 2025
compiledate=Jan  6 2025
skin=Default Skin
sourcedate=2025-01-04
branch=release-9.1
rev=de1ec82
component=enigma2, signal

stbmodel=hd2400
stbmodel=hd2400
kernelcmdline=libata.force=3.0G ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=480M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 9.1-release %h


PC: 0049cf94
    00000000 00000001 00000000 00000001
    00000000 7fa96b60 00000000 7fa96ab4
    71e833b0 88b307f7 00000004 75934fb3
    7669a498 ffffffff 0000000c 00700000
    014d0788 014cd7f0 01703968 00000000
    00780288 73d90230 7668f7fc 7669d6f4
    0000001c 76141b00 00000000 00000000
    76874af0 7fa969f8 00000000 0049cf90
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x46D3B0]
linux-vdso.so.1(n/a) [0x77185540]
/usr/bin/enigma2(_ZN11eDVBService10isPlayableERK17eServiceReferenceS2_ [0x49CF94]
/usr/bin/enigma2(n/a) [0x5C3E28]
/usr/lib/libpython3.9.so.1.0(n/a) [0x7669D7D0]
-------FATAL SIGNAL 11


dmesg

[littlesat]

Do you use ci (common interface)?

[Dimitrij]

Barretski

Please install develop image for test.

[Dimitrij]

Barretski

Test.

 

Restart GUI debug(/home/root/*.debuglog) mode.

Add timer and goto standby.

[Barretski]

Will test tonight

[Barretski]

Init multiboot and install dev image done.

Before rebooting, possible to Install my current setup? Or should I have chosen with backup instead of without?

Probably won't have time to continue until late tonight.

[Dimitrij]

Better without backup.

[Barretski]

[Screen] Showing screen 'Standby'.
[eHdmiCEC] send message 36
[eHdmiCEC] received message 36
[eHdmiCEC] received message 36
[DVBCAHandler] no more services
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x98fde0
[eEPGTransponderDataReader] remove channel 0x98fde0
[eDVBResourceManager] stop release channel timer
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eDVBFrontend0] close frontend
**** shutdown JESS ub 4
[eDVBFrontend0] [turnOffSatCR] running mainloop
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOL
TAGE 0
[eDVBFrontend0] sleep 200ms
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 0
[eDVBFrontend0] setVoltage 4
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 1 FE_SET_VOL
TAGE 1
[eDVBFrontend0] setTone 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] sendDiseqc: 70200000(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOL
TAGE 0
[eDVBFrontend0] delayed close frontend
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOL
TAGE 2
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eHdmiCEC] received message 87 00 E0 91
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eHdmiCEC] received message 87 00 E0 91
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eHdmiCEC] received message 87 00 E0 91
[TIMER] activating state 1
[TIMER] Filename calculated as: '/media/hdd/movie/20250110 1528 -
V sport vinter HD (S) - NHL'
PC: 000a5700
Fault Address: 00000000
Error Code: 519
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x798B0]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61BE0F0]
/usr/bin/enigma2(_ZN11eDVBService10isPlayableERK17eServiceReferenc
eS2_ [0xA5700]
/usr/bin/enigma2(n/a) [0x1A0AA4]
-------FATAL SIGNAL 11
[gRC] Warning: Main thread is busy, displaying spinner!

Edited by Barretski, Today, 15:56.

[Barretski]

Dev image from today, rebooted using gui into debug and above is from enigma.20250110.debuglog in root home dir.

[Barretski]

Hard coded debug level to 5 instead:

Current Picon Path : /media/hdd/picon/
[CI0] what 1
[CI0] ci inserted
[CI0] > 91 04 00 01 00 41
[CI0 SESS] slot: 0x314490
[CI0 SESS]: 91 04 00 01 00 41
[CI0 SESS] RESOURCE MANAGER 1
[CI0 SESS] new session nb 1 0xb3f036a0
[CI0 SESS] sendOpenSessionResponse
[CI0] < 92 07 00 00 01 00 41 00 01
[CI0] < 90 02 00 01 9f 80 10 00
[OpenWebif] -D- tuner '0' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner A'[OpenWebif] -D- tuner '1' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner B'[OpenWebif] -D- tuner '2' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner C'[OpenWebif] -D- tuner '3' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner D'[OpenWebif] -D- tuner '4' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner E'[OpenWebif] -D- tuner '5' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner F'[OpenWebif] -D- tuner '6' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner G'[OpenWebif] -D- tuner '7' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner H'[Network] Getting attribute: mac for adapter: eth0
[Network] Getting attribute: dhcp for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: gateway for adapter: eth0
[Network] Getting attribute: mac for adapter: eth0
[Network] Getting attribute: dhcp for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: gateway for adapter: eth0
[TIMER] record time changed, start prepare is now: Thu Jan 1 00:59:40 1970
[MovieCut] set language to en
[MovieCut] set language to en
[MovieCut] fallback to default Enigma2 Translation for Execute cuts...
Write Remote Control Code : 2
[AutoMount.py] UMOUNT-CMD-3 ---> umount -fl '/media/net/rock'
[AutoMount.py] NFS MOUNT-CMD---> mount -t nfs -o rw,nolock,soft,proto=tcp,retry=0,intr,noatime '192.168.1.35:/media/vuplus' '/media/net/rock'
[Console] command: mount -t nfs -o rw,nolock,soft,proto=tcp,retry=0,intr,noatime '192.168.1.35:/media/vuplus' '/media/net/rock'
[eConsoleAppContainer] Starting /bin/sh
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[serviceapp_set_setting] setting servicemp3 options
[serviceapp_set_setting] setting servicegstplayer options
[serviceapp_set_setting] setting serviceexteplayer3 options
[gstplayer_set_setting] setting servicemp3 options
[gstplayer_set_setting] setting servicegstplayer options
[exteplayer3_set_setting] setting servicemp3 options
[exteplayer3_set_setting] setting serviceextplayer3 options
[VideoHardware] reading preferred modes override, using all video
modes
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[HardwareInfo] Scanning hardware info
[VideoHardware] getModeList for port DVI
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] setMode - port: DVI mode: 2160p rate: auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[Opkg] Added to OPKG destinations: /media/hdd
[eHdmiCEC] send message 84 22 00 03
[setVoiceCheckDB] value : -33
[EPGImport] autostart (0) occured at 1736521547.0456088
[CI_Assignment] activating ci configs:
[eInit] + (41) eServiceFactoryMP3
[eInit] + (43) eServiceFactoryApp
[TIMER] record time changed, start prepare is now: Fri Jan 10 16:04:40 2025
[eDVBFrontend0] opening frontend
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x88a6, guard_offset 0
7023bf02(?)
[eDVBServiceRecord] RECORD service event 13
[TimerSanityCheck] conflict not found!
[Timer] Record RecordTimerEntry(name=NHL, begin=Fri Jan 10 16:05:00 2025, serviceref=1:0:19:1F32:41:46:E080000:0:0:0:, justplay=0)
[TIMER] activating state 1
[TIMER] Filename calculated as: '/media/hdd/movie/20250110 1605 -
V sport vinter HD (S) - NHL'
PC: 000a5700
Fault Address: 00000000
Error Code: 519
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x798B0]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB61270F0]
/usr/bin/enigma2(_ZN11eDVBService10isPlayableERK17eServiceReferenceS2_ [0xA5700]
/usr/bin/enigma2(n/a) [0x1A0AA4]
-------FATAL SIGNAL 11

Timer and CI in separate threads/procs?

Edited by Barretski, Today, 16:28.

[Dimitrij]

You can check the recording on the channel(FTA) without using CI?

[Dimitrij]

First "User interface" -->"Include CI assignment" set no

[Dimitrij]

Ok. I found the problem. No more tests needed.

[Barretski]

Recorded al jazera(fta) successfully with CI assignment no and timer type record from Standby.

[Barretski]

Awesome great work Dimitrij!

In addition, really nice work with the multiboot support. Impressive and big kudos to all who worked on this.

[Dimitrij]

Yep!!!

 

DimitarCC

 

[Fixed] Possible exception in stream relay handling code

[DimitarCC]

Cool. Good that is fixed. Thanks.

[Dimitrij]

Cool. Good that is fixed. Thanks.

This patch need add in openPLi.