21 replies to this topic

[FRAP]

hello when selecting a new transponder from the search menu the search will be performed by the previously memorised transponder.I mean, whatever transponder I choose, the first memorised transponder will be scanned all the time.

 

Attached Files

•  screenshot_20250110232359.jpg   57.91KB   0 downloads

[FRAP]

If you look at the photo, I chose 12092 but the search will be done by some magic action all the time 12054. 

[Aliraza63]

Disable network search  and try again .

[FRAP]

Satfinder 

Satfinder from frequency selection menu scans the first selected frequency correctly! But if I select another frequency from the frequency menu it will scan the first frequency and not the second one. In other words Satfinder memorises the first frequency and refuses to scan other frequencies.

ps it is a one man favourite! it remembers the first frequency and refuses to scan other frequencies.

 

Translated with DeepL.com (free version)

 

 

Attached Files

•  screenshot_20250118193002.jpg   87.87KB   0 downloads
•  screenshot_20250118193051.jpg   60.19KB   0 downloads
•  screenshot_20250118193002.jpg   225.45KB   0 downloads

[mrvica]

maybe you pressed OK instead of green, we had that discussion with network, could be the same wth channel search

[littlesat]

Sorry… I hope I can investigate this one soon.

[EnoSat]

If the Left - Right arrow is used, LOCK is on the displayed transponder.

 screenshot_20250119121433.jpg   80.95KB   0 downloads

[ActionMap] Keymap 'SetupActions' -> Unkno@avl62x1_diseqc_set_voltage 18V(HORIZONTAL)
wn action 'left'! (Typo in keymap?)
[ActionMap] Keymap 'NavigationActions' -> Action = 'left'.
[TuneTest] tuning to transponder with data (12054, 27500, 0, 3, 2, 361, 1, 2, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12054000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1304 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] setVoltage 2
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend1] sleep 75ms
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] invalidate current switch params
send discq: E0 00 00 00 00 00, len:3
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
send discq: E0 00 03 00 00 00, len:3
[eDVBFrontend1] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend1] sleep 150ms
send discq: E0 10 39 F0 00 00, len:4
[eDVBFrontend1] sendDiseqc: e01039f0(?)
[eDVBFrontend1] sleep 100ms
[eDVBFrontend1] se
avl62x1_set_frontend [frequency:1304000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
t sequence pos 3
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1stream turn 0 0 0

[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
status locked, take 1041 ms
[eDVBFrontend1] fe event: status 10, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok 

If the List and OK are used, LOCK is performed on the previously selected transponder.

 screenshot_20250119121846.jpg   75.93KB   0 downloads  screenshot_20250119121923.jpg   76.16KB   0 downloads  screenshot_20250119121931.jpg   74.77KB   0 downloads

[ActionMap] Keymap 'NavigationActions' -> Action = 'right'.
[TuneTest] tuning to transponder with data (12111, 27500, 1, 3, 2, 361stream turn 0 0 0
, 1, 1, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12111000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1361 mhz
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
[Network] Getting attribute:  ip  for adapter:  eth0
[Network] Getting attribute:  netmask  for adapter:  eth0
[Network] Getting attribute:  ip  for adapter:  eth0
[Network] Getting attribute:  netmask  for adapter:  eth0
[eConsoleAppContainer] Starting /usr/bin/grab
[Network] Getting attribute:  ip  for adapter:  eth0
[Network] Getting attribute:  netmask  for adapter:  eth0
[eDVBChannel] OURSTATE: failed, fatal
[TuneTest] tuning to transponder with data (12111, 27500, 1, 3, 2, 361, 1, 1, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12111000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1361 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] set sequence pos 7
[eDVBFrontend1] invalidate curresend discq: E0 00 00 00 00 00, len:3
nt switch params
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
send discq: E0 00 03 00 00 00, len:3
[eDVBFrontend1] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend1] sleep 150ms
send discq: E0 10 39 F0 00 00, len:4
[eDVBFrontend1] sendDiseqc: e01039f0(?)
[eDVBFrontend1] sleep 100ms
[eDVBFrontend1] se
avl62x1_set_frontend [frequency:1361000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
t sequence pos 3
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrstream turn 0 0 0
ontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
[ActionMap] Keymap 'SetupActions' -> Unknown action 'ok'! (Typo in keymap?)
[ActionMap] Keymap 'ConfigListActions' -> Unknown action 'select'! (Typo in keymap?)
[ActionMap] Keymap 'ConfigListActions' -> Action = 'select'.
[Skin] Processing screen 'ChoiceBox', position=(0, 0), size=(1920 x 1080) for module 'ChoiceBox'.
[Skin] Parsing embedded skin '<embedded-in-SimpleSummproc_vmpeg_0_dst_apply_write 00000001

ary>'.
[Skin] Processing screen '<embedded-in-SimpleSummary>' from list 'ChoiceBox_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'.
[Screen] Showing screen '['ChoiceBox_summary', 'SimpleSummary']'.
[Screen] Showing screen '['ChoiceBox']'.
[ActionMap] Keymap 'WizardActions' -> Action = 'up'.
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'upUp'! (Typo in keymap?)
[eDVBChannel] OURSTATE: failed, fatal
[TuneTest] tuning to transponder with data (12111, 27500, 1, 3, 2, 361, 1, 1, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12111000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1361 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] set sequence pos 7
[eDVBFrontend1] invalidate curresend discq: E0 00 00 00 00 00, len:3
nt switch params
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
[ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
[Screen] Showing screen '['SatfinderSummary', 'SetupSummary', 'ScreenSummary']'.
[Screen] Showing screen '['Satfinder']'.
[TuneTest] tuning to transponder with data (12111, 27500, 1, 3, 2, 361, 1, 1, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12111000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1361 mhz
[eDVBFrontend1] set sequence possend discq: E0 00 00 00 00 00, len:3
 3
[eDVBFrontend1]proc_vmpeg_0_dst_apply_write 00000001

 set sequence pos 7
[eDVBFrontend1] invalidate current switch params
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
send discq: E0 00 03 00 00 00, len:3
[eDVBFrontend1] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend1] sleep 150ms
send discq: E0 10 39 F0 00 00, len:4
[eDVBFrontend1] sendDiseqc: e01039f0(?)
[eDVBFrontend1] sleep 100ms
[eDVBFrontend1] se
avl62x1_set_frontend [frequency:1361000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
t sequence pos 3
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrstream turn 0 0 0
ontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
[Network] Getting attribute:  ip  for adapter:  eth0
[Network] Getting attribute:  netmask  for adapter:  eth0
[eDVBChannel] OURSTATE: failed, fatal
[TuneTest] tuning to transponder with data (12072, 27500, 1, 3, 2, 361, 1, 2, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12072000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1322 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] set sequence pos 7
[eDVBFrontend1] invalidate curresend discq: E0 00 00 00 00 00, len:3
nt switch params
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
send discq: E0 00 03 00 00 00, len:3
[eDVBFrontend1] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend1] sleep 150ms
send discq: E0 10 39 F0 00 00, len:4
[eDVBFrontend1] sendDiseqc: e01039f0(?)
[eDVBFrontend1] sleep 100ms
[eDVBFrontend1] se
avl62x1_set_frontend [frequency:1322000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
t sequence pos 3
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1stream turn 0 0 0

[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
[eDVBChannel] OURSTATE: failed, fatal
[TuneTest] tuning to transponder with data (12072, 27500, 1, 3, 2, 361, 1, 2, 0, 2, -1, 1, 0, -1, 4096)
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 361 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 12072000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 361 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend1] tuning to 1322 mhz
[eDVBChannel] OURSTATE: tuning

Edited by EnoSat, 19 January 2025 - 12:29.

[littlesat]

I just tried it here.. (9.1 Release from 1-Jan-2025). and here it is changing the frequency...???

Edited by littlesat, 20 January 2025 - 12:39.

[littlesat]

Problem confirmed, found and will be resolved soon..... needs to be cherry picked into release 9.1\

 

FYI

https://github.com/O...6a4c71b3469347c

Edited by littlesat, 20 January 2025 - 15:31.

[FRAP]

I just tried it here.. (9.1 Release from 1-Jan-2025). and here it is changing the frequency...???

Hello Thank you for bringing this to my attention This is a very hidden problem and not immediately visible.I found it on my old duo2 OpenPLI 9.1 with the latest release.

[mrvica]

hopefully we´ll get last 5 commits on develop into 9.1 !

Commits · OpenPLi/enigma2 · GitHub

[littlesat]

I cannot check right now... but what 5 commits?

 

I cannot cherry pick or commit something in release. 

[mrvica]

I mean these ones:

Commits on Jan 20, 2025
Resolve issue with changes in Selection window in ScanSetup
author
Littlesat
committed
2 hours ago
·
Merge pull request #4169 from DimitarCC/gstreamer-fixes-subs
littlesat
littlesat
authored
4 hours ago
·
Verified
[Fixed] Wrong subtitle track numbers
DimitarCC
DimitarCC
committed
6 hours ago
·
Commits on Jan 12, 2025
Merge pull request #4166 from ims21/develop
littlesat
littlesat
authored
last week
·
Verified
DVB subtites - fixed background transparency
author
ims
committed
last week
·

[littlesat]

Thanks!

[FRAP]

Thank you all for your help I replaced ScanSetup.py and the problem disappeared.

https://github.com/O...f7ea5388d8d2a44

[littlesat]

Thanks…. Sounds you understand the quick fix

Edited by littlesat, 20 January 2025 - 18:59.

[Huevos]

Problem confirmed, found and will be resolved soon..... needs to be cherry picked into release 9.1\

 

FYI

https://github.com/O...6a4c71b3469347c

That is a hack. You only need that because your "on_change" argument is missing. Compare PLi with ViX.

 

PLi: https://github.com/O...anSetup.py#L641

 

ViX: https://github.com/O...anSetup.py#L638

[littlesat]

Hi Huevos,

 

Sounds like I have to learn a littlebit more that this stuff saved a lot of 'hacks'

 

Thanks good to know.... Then a lot could be simplified here.

 

E.g. lines like these below can be removed...

 

I suggest for now for 9.1 'my hack' is fine....

def keyLeft(self):
    ConfigListScreen.keyLeft(self)
    self.newConfig()
 
def keyRight(self):
    ConfigListScreen.keyRight(self)
    self.newConfig()
 
def handleKeyFileCallback(self, answer):
    ConfigListScreen.handleKeyFileCallback(self, answer)
    self.newConfig()

Edited by littlesat, 21 January 2025 - 16:17.

[Huevos]

 

Hi Huevos,

 

Sounds like I have to learn a littlebit more that this stuff saved a lot of 'hacks'

 

Thanks good to know.... Then a lot could be simplified here.

 

E.g. lines like these below can be removed...

 

I suggest for now for 9.1 'my hack' is fine....

def keyLeft(self):
    ConfigListScreen.keyLeft(self)
    self.newConfig()
 
def keyRight(self):
    ConfigListScreen.keyRight(self)
    self.newConfig()
 
def handleKeyFileCallback(self, answer):
    ConfigListScreen.handleKeyFileCallback(self, answer)
    self.newConfig()

Yes... They don't exist in the ViX version of ScanSetup.

[littlesat]

In the past they should exist…..