Good people!
currently using the latest CCcam 2.1.4 on my DM7025+ - with Irdeto and Nagra.
Irdeto works just fine but obviously CCcam 2.1.4 has "some" problems with Nagra, therefore ...
- deeply appreciate if anyone could advice where I can download CCcam 2.0.9 (I need only this particular one!!!) and how to install it MANUALLY on OpenPli image.
Many thanks in advance!
P.S. .... may be its a good idea to have in OpenPli image the option to choose (including all older versions) the CCcam or any other plugin's as it was in a Jade 3... just a loud thinking ! :-)
11 replies to this topic
#1
-
- Senior Member
- 55 posts
0
Neutral
Posted 18 April 2010 - 13:27
Using DM7025+ with OpenPLi-2.1 | 75.0E | 105.5E | 113.0E | 134.0E | 166.0E |
Re: CCcam for OpenPli #2
-
- Forum Moderator
PLi® Core member - 33,471 posts
+118
Excellent
Posted 18 April 2010 - 18:10
plz use the search option
its discussed many times before
its discussed many times before
on the Glassfibre 1GB DVB-C...
Re: CCcam for OpenPli #3
-
- Senior Member
- 55 posts
0
Neutral
Posted 19 April 2010 - 01:57
To Hemertje - I did figure it out how to install it but still no idea where to get the IPK package for the named CCcam 2.0.9, as we all know OpenPli works only with this packages and no other like zip/tar/gaz so please - HELPPPPPPPPP !!!
P.S. .... before posting the thread of course I did use the search but unfortunately couldn't get to the point so... :-)
P.S. .... before posting the thread of course I did use the search but unfortunately couldn't get to the point so... :-)
Using DM7025+ with OpenPLi-2.1 | 75.0E | 105.5E | 113.0E | 134.0E | 166.0E |
Re: CCcam for OpenPli #4
-
- Senior Member
- 55 posts
0
Neutral
Posted 19 April 2010 - 03:29
Folks - desperatly need CCcam 2.09 IPK file, deeply appriciate if you could just point out the download source.
THANKS !!!
THANKS !!!
Using DM7025+ with OpenPLi-2.1 | 75.0E | 105.5E | 113.0E | 134.0E | 166.0E |
Re: CCcam for OpenPli #5
-
- PLi® Ex-Leden
- 14,151 posts
+52
Good
Posted 19 April 2010 - 07:25
An easier solution: find the CCcam zip file. It contains the CCcam binary. Replace the one in /usr/bin/CCcam with that one.
I don't have that zip file now, but it must be easy to find on internet.
I don't have that zip file now, but it must be easy to find on internet.
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Re: CCcam for OpenPli #6
-
- Forum Moderator
PLi® Core member - 27,405 posts
+395
Excellent
Posted 19 April 2010 - 09:33
Here the 'original' zipfile. For thoose who desparately need thisone. :wink:
Attached Files
-
cccam-2.0.9_2.zip 1.82MB
130 downloads
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: CCcam for OpenPli #7
-
- Senior Member
- 55 posts
0
Neutral
Posted 19 April 2010 - 10:48
Gents!
the "desperate" :-) file has been received and done all possible to make it work but unfortunately, the simple binary file replacemnt - doesnot work!
After all it says:
- cannot connect to remote host (127.0.0.1)
- connection refused
- execute error: 1
Appriciate any further advise on... if available and possible!
Anyway - thanks for all your efforts!!!
the "desperate" :-) file has been received and done all possible to make it work but unfortunately, the simple binary file replacemnt - doesnot work!
After all it says:
- cannot connect to remote host (127.0.0.1)
- connection refused
- execute error: 1
Appriciate any further advise on... if available and possible!
Anyway - thanks for all your efforts!!!
Using DM7025+ with OpenPLi-2.1 | 75.0E | 105.5E | 113.0E | 134.0E | 166.0E |
Re: CCcam for OpenPli #8
-
- Forum Moderator
PLi® Core member - 33,471 posts
+118
Excellent
Posted 19 April 2010 - 16:55
what is all possible?
did you not forget something?
stop CCcam
FTP to the box
delete existing binary
upload new CCcam to the box
chmod 755 the binary
start CCcam
did you not forget something?
stop CCcam
FTP to the box
delete existing binary
upload new CCcam to the box
chmod 755 the binary
start CCcam
on the Glassfibre 1GB DVB-C...
Re: CCcam for OpenPli #9
-
- PLi® Core member
- 14,045 posts
+298
Excellent
Posted 20 April 2010 - 07:06
As an experiment, I added CCcam 2.0.9 into the feed last night, it should simply be available in the downloads like any other softcam.
Real musicians never die - they just decompose
Re: CCcam for OpenPli #10
-
- Senior Member
- 55 posts
0
Neutral
Posted 20 April 2010 - 14:17
Milo - THANKS A LOT!
very good "experiment", :-) although its not a kind of FULL setup due to CCcam.xml is erased after removing v214 and v209 doesn't insert it back - luckily I had a backup so now I can see entire CCcam PPanel.
One more - may I ask for the direct link to have V209 IPK package ?
And please- may we keep it there and all other older versions too as for the repository - believe I'm not the only one who may want to see it there.
Now.... THE main observation!
v214 might be the BEST but in case of "nagra" (for irdeto both, v214&v209 are just 100%!) v209 is more stable although the problem isn't gone completely but the number of "picture freeze" has been reduced on some 60-70% and "regain" timing got much shorter, probably only 0.5-1 sec against previous 5-8 sec's.
Clearly it is the CCcam "problem" so,... as for the 3rd party software provider - it would be the Pli or any other image team has full rights to demand the better version.
Really hope you folks are in touch with!
Thanks to all - for all and sorry for a trouble!!! :-)
P.S. - Appreciate any other ideas and suggestions for eliminating the problem completely !
very good "experiment", :-) although its not a kind of FULL setup due to CCcam.xml is erased after removing v214 and v209 doesn't insert it back - luckily I had a backup so now I can see entire CCcam PPanel.
One more - may I ask for the direct link to have V209 IPK package ?
And please- may we keep it there and all other older versions too as for the repository - believe I'm not the only one who may want to see it there.
Now.... THE main observation!
v214 might be the BEST but in case of "nagra" (for irdeto both, v214&v209 are just 100%!) v209 is more stable although the problem isn't gone completely but the number of "picture freeze" has been reduced on some 60-70% and "regain" timing got much shorter, probably only 0.5-1 sec against previous 5-8 sec's.
Clearly it is the CCcam "problem" so,... as for the 3rd party software provider - it would be the Pli or any other image team has full rights to demand the better version.
Really hope you folks are in touch with!
Thanks to all - for all and sorry for a trouble!!! :-)
P.S. - Appreciate any other ideas and suggestions for eliminating the problem completely !
Using DM7025+ with OpenPLi-2.1 | 75.0E | 105.5E | 113.0E | 134.0E | 166.0E |
Re: CCcam for OpenPli #11
-
- Forum Moderator
PLi® Core member - 33,471 posts
+118
Excellent
Posted 20 April 2010 - 16:54
we do NOT have any contacts with ANY softcam developers
so i'm afraid we can not help you with that
so i'm afraid we can not help you with that
on the Glassfibre 1GB DVB-C...
Re: CCcam for OpenPli #12
-
- PLi® Ex-Leden
- 14,151 posts
+52
Good
Posted 22 April 2010 - 06:38
http://downloads.pli-images.org/feeds/openpli/dm7025/enigma2-plugin-softcams-cccam209_2.0.9-r0_mipsel.ipkOne more - may I ask for the direct link to have V209 IPK package ?
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Also tagged with one or more of these keywords: DM7025
Openwebinterface updatenStarted by mrbeam, 30 Jul 2017  DM7025
|
|
|
||
DM7025
DM7025 flash file system problemenStarted by vlinder, 11 May 2014 DM7025
|
|
|
||
[dm7025] Boot vanaf CF werkt?Started by mauws79, 3 Jan 2014 dm7025
|
|
|
||
Pitiable state of DM7025 buildStarted by freemdb, 25 Jul 2013 DM7025
|
|
|
||
Blokken in het beeld (digitenne)Started by Meega, 28 Oct 2012 dm7025
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
