Jump to content


Photo

Xmltv source for reunion

France

  • Please log in to reply
286 replies to this topic

Re: Xmltv source for reunion #21 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 8 February 2011 - 09:22

These doubles entries are coming from the import you have don e with the wrong schedule.
The shifted schedule you still see is probably also from this. (Except Action - which I corrected now)

EPG in your box stay in the box until they expire or until you delete it.
Deleting the epg is performed by the following

Open a telnet session to your box: (DCC will do)

type in:

init 4 <ENTER>

rm /media/hdd/epg.dat <ENTER>

intit 3 <ENTER>

After the box has restarted perform a manual import.

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #22 grolours

  • Member
  • 19 posts

0
Neutral

Posted 9 February 2011 - 10:48

Hello wiily, thank you very much for the changes you made. I deleted the old epg.dat and restarted the box , the shedules seems to be allright now.I began to use tvxb for xml epg and get some trouble to configure it. Could you just post me an exemple for a canalsat and parabole channel, please ? it will be the last thing i ask you.

gerard.

Re: Xmltv source for reunion #23 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 9 February 2011 - 11:06

Pm send

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #24 andre97

  • Member
  • 2 posts

0
Neutral

Posted 25 September 2011 - 05:22

hello
the channels'ids and name Would it be possible to send
and the canal sat horizon for reunion :

ANTENNE REUNION #SERVICE 1:0:1:2112:21:20fa:eeee0000:0:0:0:

Reunion 1ere #SERVICE 1:0:16:2102:21:20fa:eeee0000:0:0:0:

France 2 #SERVICE 1:0:16:2151:21:20fa:eeee0000:0:0:0:

France 3 #SERVICE 1:0:16:2154:21:20fa:eeee0000:0:0:0:

France 4 #SERVICE 1:0:16:2157:21:20fa:eeee0000:0:0:0:

France 5 #SERVICE 1:0:16:215a:21:20fa:eeee0000:0:0:0:

France 0 #SERVICE 1:0:16:215d:21:20fa:eeee0000:0:0:0:

Arte #SERVICE 1:0:16:2161:21:20fa:eeee0000:0:0:0:

France 24 #SERVICE 1:0:16:2164:21:20fa:eeee0000:0:0:0:

Re: Xmltv source for reunion #25 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 25 September 2011 - 09:54

Al these channels are already in the xmltv file. Only the service links are missing. We will add them asap.

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #26 andre97

  • Member
  • 2 posts

0
Neutral

Posted 25 September 2011 - 14:54

asap willy thank you

Re: Xmltv source for reunion #27 rytec

  • Rytec EPG Team
  • 1,082 posts

+22
Neutral

Posted 26 September 2011 - 08:53

Channels are added this morning to the rytec.channels.xml file
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*

Re: Xmltv source for reunion #28 rytec

  • Rytec EPG Team
  • 1,082 posts

+22
Neutral

Posted 6 October 2011 - 09:52

...<cut>...


Why weren't you in bed at this time? ;)

Edited by WanWizard, 6 October 2011 - 14:07.
Removed spam message, also removed original. Banned the poster

~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*

Re: Xmltv source for reunion #29 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 21 May 2012 - 11:16

Hi folk,

I cannot get epg for canalsat reunion and parabole to work. Help please. Thanks.

Re: Xmltv source for reunion #30 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 21 May 2012 - 12:29

Give a bit more info pls.
What image do you use, Which importer.
Which sat do you watch?

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #31 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 21 May 2012 - 14:10

Give a bit more info pls.
What image do you use, Which importer.
Which sat do you watch?

Willy


Hi Willy,

Thank you for your reply. I have used both openpli and newnigma2 without success. I am using latest crossepg and Rytec West-Africa/Csat Horizons XMLTV from XMLTV providers and XEPGDP Providers. It seems that the data are downloaded but the graphical epg shows only current and next event which are broadcasted by the satellite and not from the downloaded epg. I also checked the downloaded epg files. There size suggests that the items have been downloaded.

The epg I am looking for are from these two bouquets.

http://www.lyngsat.c...canalsatre.html
http://www.lyngsat.c...s/parabole.html

Your kind help will be very much appreciated. Thank you.

Re: Xmltv source for reunion #32 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 21 May 2012 - 15:29

First of all, I recommend to use the XMLTV importer on OpenPLi. Crosepg uses the same sources (do not use the XEPGDB files as these are repacked files, and I do not have control over them - so I cannot comment) when using the XMLTV files but there are some issues. Sometimes it does not work.

Secondly try to import:

Rytec West-Africa / Csat Horizons XMLTV

This should contain also the data for Reunion for the satellites you mention. However I did not receive any comments on them for some time. So it could be that some of the channels are not correct. Pls. report this with the channel name and the service reference. Also report them if timings are off.

The service ref is something like this: 1:0:1:FA5:C350:16E:9E0000:0:0:0:

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #33 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 21 May 2012 - 18:10

First of all, I recommend to use the XMLTV importer on OpenPLi. Crosepg uses the same sources (do not use the XEPGDB files as these are repacked files, and I do not have control over them - so I cannot comment) when using the XMLTV files but there are some issues. Sometimes it does not work.

Secondly try to import:

Rytec West-Africa / Csat Horizons XMLTV

This should contain also the data for Reunion for the satellites you mention. However I did not receive any comments on them for some time. So it could be that some of the channels are not correct. Pls. report this with the channel name and the service reference. Also report them if timings are off.

The service ref is something like this: 1:0:1:FA5:C350:16E:9E0000:0:0:0:

Willy


I have disabled XEPGDP in Crossepg. I downloaded again the "Rytec West-Africa/Csat Horizons" from XMLTV. The download seems to complete without problem. I find on my usb pen drive several db files which suggest the epg has been downloaded. However, I still do not find listings beyond current and next events. I did a "force cvs import now" in crossepg, but still no luck.

Is there a way I can open the db files on my pen drive to check what sort of data have been downloaded. Thanks.

I forgot about the references; I do have them. There are over a hundred. Do you want me to post it?

Edited by dimoune, 21 May 2012 - 18:12.


Re: Xmltv source for reunion #34 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 21 May 2012 - 22:04

Hi again,

From the crossepg.log it seems nothing has been downloaded! Is that right? Thanks.

Attached Files



Re: Xmltv source for reunion #35 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 22 May 2012 - 08:53

Are you using still Newnigma?
This image requires a restart before the data is loaded. And probably the image cannot find the epg.dat that is created.
See if you can find a setting to define the place of the epg.dat file (in Newnigma). Crossepg normally stores this file at /media/hdd (even if you do have a HDD in your system). Set the position to /media/hdd. Or to the position you find the epg.dat file created by Crossepg.


On OpenPli you wll not have these problems.

Willy

Edited by doglover, 22 May 2012 - 08:55.

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #36 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 22 May 2012 - 10:34

On OpenPli you wll not have these problems.

Willy


Ok, I will try to install openpli and let you know if it works. Thanks.

Re: Xmltv source for reunion #37 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 23 May 2012 - 13:28

Hi Willy,

I finally got it working! However, there are several channels that have no epg. I would be extremely grateful if you could kindly add them please. I am hereby attaching the list. They are from the following two packages:

http://www.lyngsat.c...canalsatre.html
http://www.lyngsat.c...s/parabole.html

I thank you in advance.

Attached Files



Re: Xmltv source for reunion #38 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 23 May 2012 - 15:13

I will work throuh the list.
But it will take a couple of days.

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #39 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 23 May 2012 - 15:49

Found some time.

I have added the following:

<channel id="Arte.csr">1:0:16:2161:AB:AB:A00000:0:0:0:</channel> <!-- ARTE -->
<channel id="CineEmotion.csr">1:0:1:8F1:C418:16E:A00000:0:0:0:</channel> <!-- CINE EMOTION -->
<channel id="CineFamiz.csr">1:0:1:8B6:C418:16E:A00000:0:0:0:</channel> <!-- CINE FAMIZ -->
<channel id="CinemaFrisson.csr">1:0:1:15:C738:16E:9E0000:0:0:0:</channel> <!-- CINEMA FRISSON -->
<channel id="CinemaPremier.csr">1:0:19:FA4:C350:16E:A00000:0:0:0:</channel> <!-- CINEMA PREMIER HD -->
<channel id="Eurosport.csh">1:0:19:FA3:C350:16E:A00000:0:0:0:</channel> <!-- EUROSPORT HD -->
<channel id="France2.fr">1:0:16:2151:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE 2 -->
<channel id="France24.csh">1:0:16:2164:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE 24 -->
<channel id="France3.fr">1:0:16:2154:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE 3 -->
<channel id="France4.fr">1:0:16:2157:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE 4 -->
<channel id="France5.fr">1:0:16:215A:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE 5 -->
<channel id="FranceO.fr">1:0:16:215D:AB:AB:A00000:0:0:0:</channel> <!-- FRANCE O -->
<channel id="PlaneteNoLimit.csr">1:0:1:19F:C4E0:16E:A00000:0:0:0:</channel> <!-- PLANETE NO LIMIT -->
<channel id="PlaneteThalassa.csr">1:0:1:1AA:C4E0:16E:A00000:0:0:0:</channel> <!-- PLANETE THALASSA -->
<channel id="Seasons.csr">1:0:1:1A0:C4E0:16E:A00000:0:0:0:</channel> <!-- SEASONS -->
<channel id="TMC.csr">1:0:1:197:C4E0:16E:A00000:0:0:0:</channel> <!-- TMC -->

The others, I will have to write a grabber for. (No problem I think - but this will take some time)

Willy

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: Xmltv source for reunion #40 dimoune

  • Senior Member
  • 129 posts

0
Neutral

Posted 23 May 2012 - 16:26

Awesome! Thank you very much. I look forward for the others also. Thanks again.



Also tagged with one or more of these keywords: France

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users