6 replies to this topic

[DRAGO.NET]

The PLI does not change the voltage that fires the decoder to the LNB, and in fact on the other decoder I have black screen .....

Instead the "Blackhole" I could change (in hand) a file that is located in:
usr/lib/enigma2/phiton/Components/NimManager.py

and change the last line number:

nim.toneAmplitude ConfigSelection = ([("9", "600mV") ("8", "700mV") ("7", "800mV") ("6", "900mV") ("5 "" 1100mV)], "9")

so as to give the value in "mV" wanted.

I hope that in the next Pli please note this bug

[littlesat]

With opkg enigma2-src you should be able to install the py files and change them... you can also download this single file by our souceforge and put it on your box...

Why do you need this 'patch'?

[digitech]

The PLI does not change the voltage that fires the decoder to the LNB, and in fact on the other decoder I have black screen .....

Instead the "Blackhole" I could change (in hand) a file that is located in:
usr/lib/enigma2/phiton/Components/NimManager.py

and change the last line number:

nim.toneAmplitude ConfigSelection = ([("9", "600mV") ("8", "700mV") ("7", "800mV") ("6", "900mV") ("5 "" 1100mV)], "9")

so as to give the value in "mV" wanted.

I hope that in the next Pli please note this bug

Can you confirm that SatCR Lnb is working with ET 9000 on BH ?
Have tried several ( advanced ) tuner configuration setup , but never got it working .

[DRAGO.NET]

With opkg enigma2-src you should be able to install the py files and change them... you can also download this single file by our souceforge and put it on your box...

Why do you need this 'patch'?

if you have multiple set-top box at home, you need the "LNB Unicable"
But if the image does not allow you to vary the value of "mV", you have black screen on the other decoder connected to the same LNB

Can you confirm that SatCR Lnb is working with ET 9000 on BH ?
Have tried several ( advanced ) tuner configuration setup , but never got it working .

the LNB operates on the "BH", but you have to change the file:
usr/lib/enigma2/phiton/Components/NimManager.py

and the line:
nim.toneAmplitude ConfigSelection = ([("9 ", "600mV") ("8 ", "700mV") ("7", "800mV") ("6 ", "900mV") ("5" 1100mV) ], "7")
the need to change in:

nim.toneAmplitude ConfigSelection = ([("9 ", "600mV") ("8 ", "700mV") ("7", "800mV") ("6 ", "900mV") ("5" 1100mV) ], "9")

I hope helps.

[DRAGO.NET]

I think I understand, reading on other forums, the CT9000, the time has difficulty with "SCR LNB Unicable.

Maybe we need a driver update ...

[DRAGO.NET]

installing "opkg enigma2-src" and editing the file "NimManager.py" end the problems of the other decoder.
I think there's a driver issue, because I have the same problem with all the images tested (Original + PLII + BH + + OpenBH HdFreack). In practice I have on many channels the message:
line failure
http://img208.images...niafallita.jpg/

[DRAGO.NET]

There is no solution yet for "LNB SCR Unicable?