#1
Geplaatst op 29 april 2011 - 21:13
I have an DM600 (Engima1) with the latest version of Open-PLi.
I did the following :
- changed settings from "Enigma EPG" tot "SQlite database"
- changed the EPG storage directory to "hdd"
- installed the SQlite EPG download plug in (was present in the package)
- installed the Rytec XML Import plug in (was present in the package)
- did the import (took about 20 minutes)
- mapped some channels with the "Dreambox EPG config"
- restarted the DM600
However, the mapped channels still show the limited "Enigma EPG" and not the 8-days extended SQLlite EPG.
Looked on the harddisk of the DM600 : there is now a "epg.db" file of 10 MB (instead of the 1 MB file I see on my other DM600).
Can someone help me ?
Tx !
Re: EPG importer via SQlite not working #2
Geplaatst op 29 april 2011 - 23:04
Set the import to automatic using cron.
Succes
Willy
PS: import taking 20 min is normal on a DM600
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG importer via SQlite not working #3
Geplaatst op 30 april 2011 - 09:56
I have some more questions :
1. I've seen that ther is now also a "Update EPG Channel References" plugin installed. What does it do ?
2. I have three Dreamboxes, so I plan to use a common storage place for all of them, on my central storage (NAS). I suppose there is nog problem that same files on this location are used by all 3 dreamboxes and that I have to set the cron setting (for the nightly update) only on one dreambox ?
3. Do I have to do the mapping 3 times or is there a short-cut (e.g. copying files from the first (already mapped) Dreambox to the other two ?
Tx !
Re: EPG importer via SQlite not working #4
Geplaatst op 30 april 2011 - 10:34
2) This should work, but I did not have tried this before. Beware that you can only use a CIFS mount for the NAS.
As far as i understand it, the epg database is just a store for the information, you should be able to share it between boxes. Although problems could arise with a locked file. (you should set the nolock option on the mounts)
In this case you will only have to download the info on one box.
3) The mappings are used when importing the info, and as far as I understand it it is only needed on the box the info is imported on. However if this is not the case (like I said I never tried this) you can just copy the *.dat files from:
/var/tuxbox/config/dbepg/
to the corresponding map on the other boxes.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG importer via SQlite not working #5
Re: EPG importer via SQlite not working #6
Geplaatst op 30 april 2011 - 12:02
Once I had duplicated epg.db onto the server into two individual sub folders, (no big deal, with it's 80gb HDD), all ran sweetly. Try a common share by all means, but I'll think you'll end up using 3 individual sub folders under the share for each box.
Cheers- AL
Re: EPG importer via SQlite not working #7
Geplaatst op 30 april 2011 - 13:12
So, at first sight, everything seems to be OK, but fingers crossed after the first nightly cron update and after some days of heavy use,...
One last (silly) question : on one DM600, I have now the "MV" style of EPG guide. How can I go back to the normal Enigma 1 style ?
Tx !
Re: EPG importer via SQlite not working #8
Re: EPG importer via SQlite not working #9
Geplaatst op 30 april 2011 - 18:01
If my issues related to a common epg.db share are replicated at your end, then this will become apparent when you select Channel EPG mode (with quick double-press of Red button, as Willy says above), then page through the next few days of EPG on the current channel.
I saw massive corruption and duplication in these listings, on both boxes. Caused I feel by two sources each addressing and trying to update the same target. If this theory is correct, then your problem will be even worse than mine, with you having three boxes, against my two...
Cheers- AL
Re: EPG importer via SQlite not working #10
Geplaatst op 1 mei 2011 - 07:55
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG importer via SQlite not working #11
Geplaatst op 2 mei 2011 - 16:14
But I have the advantage that all three DM600PVR have exactly the same config, channel lists, bouquets,.... (used "DreamboxEdit" to copy all the stuff).
Of course I let only one DM600PVR do the nightly cron-update and also I switched off all other EPG (as now also advised by Willy).
I have however still one user question : when you once have mapped one channel (left side of the mapping-plugin) to a channel on the DM (right side), it disappears on this left side. How can I get it back ?
Re: EPG importer via SQlite not working #12
Re: EPG importer via SQlite not working #13
Re: EPG importer via SQlite not working #14
Geplaatst op 5 mei 2011 - 20:02
3 x DM600PVR sharing one "epg.db" file via CIFS
epg.db only updated by one DM600PVR, mapping only done on this DM600PVR
2 other DM600PVR even no SQLite or Rytec plugins installed (EPF only referring to epg.db on the CIFS share
After some days of nightly cron updates and heavy use : all three working as a charm, even the mappings are taken over by the 2 other DM600PVR
Also tagged with one or more of these keywords: Enigma1
help with making a plugin for enigma1, getting EPG infoBegonnen door o0otnto0o, 27 mrt 2014 enigma1, plugin, EPG |
|
|||
EnigmaSettings .NET LibraryBegonnen door shax, 30 dec 2013 enigma1, enigma2, settings |
|
|||
E1 build failsBegonnen door pr.malek, 16 okt 2013 build, enigma1, dm500 |
|
|||
zapstream.m3uBegonnen door PhenomXy, 25 aug 2012 Enigma1 |
|
|||
OpenPLi Enigma 1 DM7020 Build ErrorBegonnen door geobest, 15 aug 2012 Enigma1, DM7020, Build |
|
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers