Jump to content


Photo

Plz post your experiences

ET 5k/9k - HDMI-CEC

  • Please log in to reply
63 replies to this topic

#1 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,503 posts

+118
Excellent

Posted 19 August 2011 - 18:11

Please let us know your experiences about the major update from today regarding HDMI-CEC.
New beta images are online and the (update) feed is available.

What should it do:
With these set of config settings you can control your TV <--> AV receiver <--> ET9k, for both ways or directly between your TV and receiver, TV <--> ET9k.

What should happen is:
- TV goes on of you turn on your TV
- TV switches to the correct input channel
- With your TV remote you can controll the STB

- TV goes off when you turn off your STB

- STB goes on when you turn on the TV, and the correct HDMI input will be selected
- With your TV remote you can controll your STB

- STB goes off when you turn off your TV



Let us know how it works at your place.
for example the OSD name, should be 'hostname'.

How to log your box?

open a telnet session towards your STB.
login at your STB
type "init 4" (without quotes)
start enigma manual, so type "enigma2" (without quotes)
in your telnetscherm you will see sroll all command's

on the Glassfibre 1GB DVB-C...


Re: Plz post your experiences #2 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,503 posts

+118
Excellent

Posted 19 August 2011 - 18:13

PS. please also post your brand and model of your TV and STB?

on the Glassfibre 1GB DVB-C...


Re: Plz post your experiences #3 Sandbox

  • Member
  • 25 posts

0
Neutral

Posted 20 August 2011 - 07:22

TV : Panasonic 50" Plasma
Amp : Denon AVR 1910
ET9k

- TV goes on of you turn on your TV : if you meant when you turn STB ON, then no it is not working (i suspect it is because you broadcats a Pana cec manufacturer code, as it was working before when I was sending 0x04)
- TV switches to the correct input channel : no
- With your TV remote you can controll the STB : no

- TV goes off when you turn off your STB : yes

- STB goes on when you turn on the TV, and the correct HDMI input will be selected : yes
- With your TV remote you can controll your STB : no

- STB goes off when you turn off your TV : untested

G

Re: Plz post your experiences #4 Sandbox

  • Member
  • 25 posts

0
Neutral

Posted 20 August 2011 - 07:25

The previous result where with 19/07 compile, I see changes have been pushed to the cvs, I will compile them and report

Re: Plz post your experiences #5 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,503 posts

+118
Excellent

Posted 20 August 2011 - 10:19

you can also updates online to todays beta status...

on the Glassfibre 1GB DVB-C...


Re: Plz post your experiences #6 1701d

  • Senior Member
  • 38 posts

+3
Neutral

Posted 20 August 2011 - 13:25

TV: Panasonic LCD TX32D85LZF
STB: ET9K
AV: Yamaha TX-V467 On HDMI1

Connection Is ET9K <= HDMI => Yamaha <= HDMI => Panasonic TV

TV goes on of you turn on your TV
=> YES
TV switches to the correct input channel
=> YES (Result is probably useless, because the TV switcches always to HDMI1 caused by the "Panasonic Hotel Mode")
With your TV remote you can controll the STB
=>YES
TV goes off when you turn off your STB
=>YES
STB goes on when you turn on the TV, and the correct HDMI input will be selected
=> YES (Result is prbably useless, because the TV switcches always to HDMI1 caused by the "Panasonic Hotel Mode")
With your TV remote you can controll your STB
=> YES
STB goes off when you turn off your TV
=> YES

Everything works fine!. Displayed Hostname ist "CEC/HDMI1"

But Deep-Standby seems to be completly unsupported.

- TV stays OFF when starting from Deep-Standby
- TV Remains ON when shutting down the box directly to Deep Standby

Phantastic Job done! :-)))

Kind Regards

Klaus

Re: Plz post your experiences #7 CoolST

  • Member
  • 28 posts

+3
Neutral

Posted 21 August 2011 - 14:19

Hello .
my STB is ET9000 , and TV is Sony Bravia EX710


- TV goes on of you turn on your TV ( YES )
- TV switches to the correct input channel ( YES )
- With your TV remote you can controll the STB ( YES )

- TV goes off when you turn off your STB ( YES )

- STB goes on when you turn on the TV, and the correct HDMI input will be selected ( NO )
- With your TV remote you can controll your STB ( YES )

- STB goes off when you turn off your TV ( YES )



for example the OSD name, should be 'hostname'. ( ET9000 )

thank you .

Re: Plz post your experiences #8 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,503 posts

+118
Excellent

Posted 21 August 2011 - 14:48

thx, did you allready update today?
can you post your telnet logging regardind hdmi-cec commands?

on the Glassfibre 1GB DVB-C...


Re: Plz post your experiences #9 CoolST

  • Member
  • 28 posts

+3
Neutral

Posted 21 August 2011 - 15:56

yes new Image .

Log : i can see on telnet , but wher is stored ?


Re: Plz post your experiences #10 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,503 posts

+118
Excellent

Posted 21 August 2011 - 16:00

easiest is select/copy/past from telnet

on the Glassfibre 1GB DVB-C...


Re: Plz post your experiences #11 CoolST

  • Member
  • 28 posts

+3
Neutral

Posted 21 August 2011 - 16:19

my log : sorry but can't copy more than that Posted Image

[eDVBCAService] new service 1:0:1:73:65:53:CE40000:0:0:0:				   
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:73:65:53:CE40000:0:0:0:	
[eDVBCIInterfaces] gotPMT											
demux 0 mask 01 prevhash 00000000									 
doing version filtering											 
010f:  02 00 73 05 00 00											 
mask:  ff ff ff 3f 00 00


Re: Plz post your experiences #12 1701d

  • Senior Member
  • 38 posts

+3
Neutral

Posted 21 August 2011 - 16:51

I have tested with the latest update from today.

- Everything works fine as along as I'm just using the ET9K RC.
- TV RC works only partially with some errors.

Please find attached the E2 logfile.

Kind regards

Klaus

Attached Files



Re: Plz post your experiences #13 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 21 August 2011 - 21:49

- STB goes on when you turn on the TV, and the correct HDMI input will be selected [color=#ff0000][b]( NO )


By default, you need to select the correct input on the tv, after which the et will wakeup.
you need to tweak the wakeup signal setting if you want different behaviour.

Re: Plz post your experiences #14 CoolST

  • Member
  • 28 posts

+3
Neutral

Posted 22 August 2011 - 00:11

hello , with my other stb Coolstream neutrino HD , my tv work fine .
i'm here only to report about hdmi-cec with my tv and the ET , may be is the problem only with sony TV but in ct-forum ( dispatcher ) has the same problem with sharp tv .

for me it's not problem when the stb don't go on when i switch on my tv , more important is that stb go off when the tv go auto off and that's GOOOOD .

Congratulation for yous Work !!

thank you .

Re: Plz post your experiences #15 1701d

  • Senior Member
  • 38 posts

+3
Neutral

Posted 22 August 2011 - 07:20

May I ask the developers a question over here?

As mentioned above, HDMI-CEC does not work out of deep-standby. This is not surprising, since there is nothing running in deep standby.
Now my question: Is it possible to send the wakeup-signal via HDMI-CEC to the TV without using the remote. In this Case, it should be fairly easy to switch on the TV e.g. within the Elektro-Plugin, when a manual startup is detected. This would be a perfect solution for me to use this functionality out of deep-standby.

Thanks & kind regards

Klaus

Re: Plz post your experiences #16 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 22 August 2011 - 08:52

no need for the elektro plugin, we can add settings about deep sleep handling.
I just think it's not a good idea to wakeup the tv by default when coming out of deep sleep (note you cannot see any difference between manual startup or reboot because of power outage)

Re: Plz post your experiences #17 atilaks

  • Senior Member
  • 245 posts

+5
Neutral

Posted 22 August 2011 - 10:04

Maybe other way around...? When TV is turned on the box is turned on too (also when in a deep standby). When TV is turned off the box goes to a deep standby.

Re: Plz post your experiences #18 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 22 August 2011 - 10:05

deep sleep = power off, so no hdmi(-cec)

Re: Plz post your experiences #19 1701d

  • Senior Member
  • 38 posts

+3
Neutral

Posted 22 August 2011 - 10:18

[...]
I just think it's not a good idea to wakeup the tv by default when coming out of deep sleep (note you cannot see any difference between manual startup or reboot because of power outage)

This is why I suggested the Elektro-Plugin (as an example). This plugin already tries to distinct between a manual an a timer wakeup and does a good job, if the box is able to catch the right system-time via NTP.

Kind regards


Klaus

Re: Plz post your experiences #20 Sjaaky

  • Senior Member
  • 7,443 posts

+41
Good

Posted 22 August 2011 - 10:21

This plugin already tries to distinct between a manual an a timer wakeup and does a good job

But that's easy as that difference can be made by reading /proc/stb/fp/was_timer_wakeup.

After the box has come out of deep-standby it takes 2 key presses on the power button to wakeup the television. Not a perfect solution, but it will do in practice, I hope.


18 user(s) are reading this topic

0 members, 18 guests, 0 anonymous users