127 replies to this topic

[mrvanity]

Sorry for the second post.
I could not edit the previous one.
At the attached screen you can that the selected option is "Percentage left" and "Show channel numbers in channel selection" is set to "off"

It would very helpful if at the right of the percentage numbers we could have the % symbol.

My regards!

Attached Files

•  screenshot.jpg   97.45KB   66 downloads

[2boom]

nothing changed after today's update for Vu+ Ultimo. it's impossible to choose the progressbar's position or show percentages

using openPli 2.1

Edited by 2boom, 9 August 2012 - 07:04.

[Dimitrij]

All is fine.
PLI 3.0

[littlesat]

I'm scared that the skin you're using is "changing" stuff.....

Edited by littlesat, 9 August 2012 - 07:55.

[mrvanity]

Hmmmm...
I am using SimpleHD Skin
http://openpli.org/f...de-for-openpli/
I will give it a shot in the skin's topic.
My regards!

[mrvanity]

It doesn't seem to be a skin problem.
I have used the default hd skin and still no % symbol.
If that helps i am using Pli 2.1 and not 3.0 in a DM500HD

My regards!

[ims]

tried on PLi-HD and all works well. Try it with this default skin.

[mrvanity]

I have already tried that. (see my above post)
Have you done an online update or have you flashed yesterdays nightly?

[Alias1]

I have already tried that. (see my above post)
Have you done an online update or have you flashed yesterdays nightly?

I have done a online update today and it does work as advertised

[2boom]

Vu+ ultimo pli 2.1

Attached Files

•  screenshot.jpg   140.5KB   66 downloads
•  screenshot1.jpg   132.7KB   75 downloads
•  screenshot2.jpg   192.57KB   72 downloads
•  screenshot3.jpg   85.2KB   57 downloads

[littlesat]

Some python code is not up to date.... Yes or No at event progress should be not possible now.... It should be left progressbar, right progressbar, left percentage, right percentage and no....

Edited by littlesat, 9 August 2012 - 15:43.

[2boom]

I installed enigma2-src and it worked, but it looks absolutely terrible, and unusable to boot. It was a great idea, but it's implementation really screwed it up. It's useless to me. Thanks.

[littlesat]

As you had already old python code probably something else is bad....??? and not updated?? (I suggest also the enigma2 binary??)

I just saw the lates VUDUO builds were from 5-Aug... so I suggest it is related to that????

Edited by littlesat, 9 August 2012 - 17:39.

[mrvanity]

Hello again!
Just installed from scratch the build of 19-08-2012 (v 2.1) on my DM500HD.
Without installing anything else, i get the the same result as
http://openpli.org/f...post__p__291802
using both of two defaults skins.
Is there a chanse that it behaves differently on 2.1 and 3.0?

My regards!

[littlesat]

I suggest no... as the % sign is added there in cpp.... I suggest autobackup/install did restore something....

[mrvanity]

But i havent used any restore feature.
I have tested it that in a clean, empty. "virgin" installation.
I have only scanned one transpoder manually.

My regards

[littlesat]

Here no problem so ?????????

But can you post a new screendump?

Edited by littlesat, 20 August 2012 - 10:09.

[blzr]

But i havent used any restore feature.
I have tested it that in a clean, empty. "virgin" installation.
I have only scanned one transpoder manually.

My regards

and langauage is set to Greek? if so, could you test with EN for example?
//just a loose idea, actually I doubt it would be the cause, but it doesn't hurt to try

[mrvanity]

Thank you for your answer blrz.
Unfortunately i have tried this but with no luck.
(actually it was my first test)

My regards!

[mrvanity]

Again flashed from scratch, today's v2.1 build (21/08/2012) for DM500HD.
"Clean" machine, only scanned for channels and again no % symbol. Using both "default" skins.

I think i am going to give up..

My regards,