12 replies to this topic

[gangster007]

we have new driver update again
http://www.et-view.c...31-20110930.zip

[littlesat]

Do you have a link were we can read what are the improvements???

[nietgiftig]

Strange that the OEM of the ET9000 boxes the updates not send to the most important image builder for their boxes (Pli).
Inclusive release notes.

As far as I can see are all images from other release groups for the ET9000 build upon the Pli image.

[Dimitrij]

Sorry, but ask the question here.
ET9000 dvb module options:

parm: lnb_power_off_in_standby:int
parm: adapter_nr:DVB adapter numbers (array of short)
parm: simul_hdmi_scart:int
parm: enable_avc51:int
parm: number_of_decoders:int

How to write two options together in / etc/modulis/et9000?

dvb lnb_power_off_in_standby=1 enable_avc51=0

or

dvb lnb_power_off_in_standby=1,enable_avc51=0

[pieterg]

without the comma

[Dimitrij]

without the comma

Thank you.
Everything turned out.

enable_avc51 = 0
He turned on or off ?

[pieterg]

well, I guess 'not enabled' is 'turned off'

[MiLo]

Strange that the OEM of the ET9000 boxes the updates not send to the most important image builder for their boxes (Pli).
Inclusive release notes.

But they do, I always get an e-mail notification when the driver is officially released. I haven't gotten that mail yet, so I'm considering it in beta still. You're free to install it of course, but for mainstream users, once installed it's hard to roll back to an older version.

[nietgiftig]

I haven't gotten that mail yet, so I'm considering it in beta still. You're free to install it of course, but for mainstream users, once installed it's hard to roll back to an older version.

Sorry, I was under the impression that the Pli team had to pick updates themselves from the internet.
Good to read that there is interaction between the OEM and Pli

I like new stuff, but I'm waiting until the Pli team implements it with notification over what's changed.

[marto]

The FanSetup plugin and the Fan is working again with the latest drivers. That is the only change i have noticed.

[gangster007]

Changelog:

-lnb disable (with DvbOptions Plugin)
-fancontrol proc entries for et9x00
-pcm delay adjustable A/V Settings

[Dimitrij]

DvbOptions plugin for ET9000.

author bla666 www.clarke-support.com

Edited by Dima73, 3 October 2011 - 19:54.

[MrKappa]

Hello' I tried a couple of times the online update of OpenPLI, which I understood should contain the new drivers as well as several plugins, and I tried also a new installation of last beta available here. Then in the first case I get that the box hang up during the boot and same result or green screen I get after the installation if I start to install the same plugins I'm currently using.
Then my question is: do you know about any incompatibility with "Quickbutton"? i got this on the log:

openpli 2.1 %h

]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
n for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[EPGC] 40140 events read from /media/hdd/epg.dat
[EPGC] 2571429 bytes for cache used
[Picon] adding path: /usr/share/enigma2/picon/
[Picon] adding path: /picon/
main thread is non-idle! display spinner!
RemovePopup, id = ZapError
playing 1:0:1:2136:3070:13E:820000:0:0:0:
accel 8704 bytes
accel memstat: used=0 kB, free 3600 kB, s 0 kB
accel memory: 0
accel 8704 bytes
accel memstat: used=12 kB, free 3588 kB, s 12 kB
accel memory: 0
2
3
1
not pauseable.