23 replies to this topic

[Dimitrij]

dmesg

...
generic-usb 0003:051D:0002.0001: claimed by neither input, hiddev nor hidraw
....

cat /proc/bus/usb/devices

...
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  6 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=051d ProdID=0002 Rev= 1.06
S:  Manufacturer=APC
S:  Product=Back-UPS ES 700G FW:871.O1 .I USB FW:O1
S:  SerialNumber=3B0948X82011
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   6 Ivl=10ms
...

Maybe you need a driver?
Help, who knows.

[Erik Slagter]

The device is recognised as USB device and nothing more.

So yes, you need "something" to deal with this device. There is some ups management support for linux, look for "nut", but the chances it will run on your stb are very slim.

[Dimitrij]

Thank you.

[Dimitrij]

Without the support hiddev in the Linux kernel does not work.
You can add it to the PLI 2.1?

Edited by Dima73, 13 October 2011 - 08:41.

[pieterg]

yes we can, but are you sure you need HIDDEV?
Not HIDRAW for instance?

And, for both of these you will need a userspace 'driver' to control the device.

[Dimitrij]

yes we can, but are you sure you need HIDDEV?
Not HIDRAW for instance?

And, for both of these you will need a userspace 'driver' to control the device.

It seems only HIDDEV.
http://www.apcupsd.c...tion-and-driver
And what will need a driver?

[pieterg]

or in your case, acupsd will probably control the hiddev directly.

[Dimitrij]

I'll wait.
While I will write a plugin for startup and testing status .

Edited by Dima73, 13 October 2011 - 11:08.

[Dimitrij]

pieterg
Thank you.

[Dimitrij]

Put together a package to monitor the firm UPS APC.
Will work only on the PLi from versions of 13.10.2010, in the Linux kernel and added support for HIDRAW HIDDEV.
Thank pieterg
All the details of the settings here:
http://www.apcupsd.com/manual/
There's no big deal.
From a simple plug-in added on / off autostart, status, etc.
The only thing that apcupsd version in January 2010.
Although there are already new:
http://sourceforge.n...Stable/3.14.10/
Who will gather for mipsel be grateful.

Edited by Dima73, 16 October 2011 - 13:11.

[Dimitrij]

Updated version ApcUpsd (3.14.10), September 2011.

[Dimitrij]

-rename package

-updated tools apcupsd (3.14.12), March 2014

Edited by Dimitrij, 22 April 2015 - 20:02.

[Dimitrij]

version 1.2

-updated tools apcupsd (3.14.14)

-add support arm

Edited by Dimitrij, 28 April 2017 - 18:53.

[mymon]

Thanks Dimitrij!

I Misses the "-add support arm"

happy to have it back

[catdog]

Is this extension still compatible with the latest Open-PLi and Dreambox 8000HD?

I am getting Illegal instruction on launching apcaccess and the daemon dies silently when started. The configuration is pcnet for AP9606, UPS cable ETHER.

 

The only event in /var/log/messages is:

apcupsd 3.14.14 (31 May 2016) debian startup succeeded, which is also replicated in /var/log/apcupsd.events

The daemon records pid yet instantly disappears from the memory

[Dimitrij]

ver. 1.3

 

back to apcupsd version '3.14.10' for mipsel

[WanWizard]

Added to the third-party repo, will be in the feeds in the next build run, in a few hours...

[Dimitrij]

Added to the third-party repo, will be in the feeds in the next build run, in a few hours...

Thanks.

[catdog]

Something is broken in enigma2-plugin-extensions-apcupsd-tools_1.3_all.ipk when doing vanilla installation on Vu+Duo4k i.e. with no previous apcupsd package installed.

This release finishes with an error message "Value OS" is not defined and the plugin does not show up on the menu.

 

The workaround is to remove version 1.3 and install 1.2, which completes fine. Then remove 1.2 and install back 1.3. This time the installation goes through OK.

[catdog]

The trick with upgrade from 1.2 to 1.3 worked only until next reboot. The error is back again and the plugin disappeared from the menu. The core functionality is unaffected I am getting output with apcaccess in terminal.