Jump to content


Photo

DTT USB AF9035 and kernel 3.0.x -> patch


  • Please log in to reply
25 replies to this topic

Re: DTT USB AF9035 and kernel 3.0.x -> patch #21 ambrosa

  • Senior Member
  • 161 posts

+35
Good

Posted 21 October 2011 - 20:54

note that we do not need to add modules which are loaded as dependencies; just the bare minimum.
We probably do not need

kernel-module-tda18218
kernel-module-af9033
kernel-module-tda18218
kernel-module-mxl5007t
kernel-module-tua9001


Af9035 need 9033 and tda18218... Without them you have an error during the modprobe :)

D.


I confirm with kernel 2.6.31
You must install manually these drivers BEFORE af9035 or you get errors.
It looks auto install is not working: dependencies not set correctly ?

I need to verify the same problem with 3.0.3 : I had not time to make testing.
STB: Clarke Tech ET9100
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)

Re: DTT USB AF9035 and kernel 3.0.x -> patch #22 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 21 October 2011 - 21:12

ok, these are soft dependencies unfortunately, which depend on the hardware.
(when I modprobe, without the corresponding hardware, I can load the module just fine)

I'll autoload those deps as well.

Re: DTT USB AF9035 and kernel 3.0.x -> patch #23 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 21 October 2011 - 21:14

You must install manually these drivers BEFORE af9035 or you get errors.


That is going to be a problem, as we cannot really control the order in which modutils loads the modules (in alphabetical order).
And we cannot change the name of the modutils file, with the module_autoload clause...

Re: DTT USB AF9035 and kernel 3.0.x -> patch #24 ambrosa

  • Senior Member
  • 161 posts

+35
Good

Posted 22 October 2011 - 08:52


You must install manually these drivers BEFORE af9035 or you get errors.


That is going to be a problem, as we cannot really control the order in which modutils loads the modules (in alphabetical order).
And we cannot change the name of the modutils file, with the module_autoload clause...


Yes, I've suppose this.
But it's not a real problem for expert user.
The problem is for newbie or normal user.
In my mind this can be solved with aa good documentation.
You have a Wiki. Open a new section named "USB DVB-T" and write into specific information about different DVB USB stick ? (i.e. I can write docs for A835)
If not, users must parse forum to solve their problems and this is wrong.

A question: why you don't include USB stick firmware file (.fw) in af9035 package ? For legal policy ?
STB: Clarke Tech ET9100
Mass storage: internal SATA-II HDD 1TB WD10EACS GreenPower 5400rpm
Mass storage: external USB pen drive 2GB
Firmware: OpenPLi kernel 3.x.x
Tuner A: AVL2108 (DVB-S2) HotBird 13E
Tuner B: AVL2108 (DVB-S2) HotBird 13E
Tuner C: AverMedia A867 (DVB-T HD) (AF9035 + MXL5007T)
TV: plasma PANASONIC GT30 fullHD
Audio: PCM through HDMI (no Dolby decoder)

Re: DTT USB AF9035 and kernel 3.0.x -> patch #25 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 22 October 2011 - 09:41

A question: why you don't include USB stick firmware file (.fw) in af9035 package ? For legal policy ?


we have no af9035 (meta-)package yet.
When we do, it will depend on the af9035 firmware.

Re: DTT USB AF9035 and kernel 3.0.x -> patch #26 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 22 October 2011 - 11:14

found a better solution to force the autoload order, this should probably work:

module_autoload_dvb-usb-af9035 = "af9033 mxl5007t tda18218 tua9001 dvb-usb-af9035"


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users