1459 replies to this topic

[plnick]

I forgot the ret.append(ev) in the for loop, should now work again

[ims]

cosmetics - Channel EPG:  HDTVZvukový popisSkryté titulky. I think, it is in longdesc. On TV it seems, it is each with new line, but there it is in one line => without spaces between. See on CT1(23.5E). Better would be: HDTV Zvukový popis Skryté titulky.

[scipion]

Hello - I am new in this thread so forgive me if my question has already been adressed.

Is there a way to reload blacklist/whitelist from a command line or an API without restarting enigma?
What I want to do is switching 'on' the parental control for some channels after a given hour. Then switching it off in the morning.
I managed to do this by switching an empty file and a full file.

I tried using:

wget -qO - http://mydreambox/we...streload?mode=0
but it does not work.

Any clue how to do this?
Thanks.

[zicht2]

Feature request :

Is it possible to implement an allowed ip range list ?

Even better if DynDNS would be possible in ip allowed list in setup.

 

This way we have appart from password another control for security over internet .

 

best regards

[radar]

Hi,

 

In post #1124, I was looking for a way to know if a channel is playable or not in order to provide this information in the webif, by, for instance, shading the name of the non playable channels. 

Since then, I found the enigma web API and, now, I'm able to know for each channel if it is playable or not by requesting this url: http://192.168.1.44/...:1:C00000:0:0:0 where sREF is the reference of the concerned channel. As answer, I have:

 

<e2serviceplayable>
<e2servicereference>1:0:19:2349:442:1:C00000:0:0:0</e2servicereference>
<e2isplayable>True</e2isplayable>
</e2serviceplayable>
 

with e2isplayable set to True or False. That's exactly what I was looking for.

 

There is also the python API, available here.

 

Now, my question is the following: if I want to hack open webif to implement what I'm requesting, how should I proceed for tests? I have already downloaded the code but how can I execute it? Should I compile it and create a package that I'll install on my box besides the official open webif, listening on another port, each time I make changes? Or could I test it directly from my PC?

 

Any help on that is very appreciated.

 

Thanks in advance.

[Erfeniuses]

Hi. Has anyone got transcoding work with e2openplugin-OpenWebi v.0.2.6 on VU+ Duo2 OpenPLI4.x (jan/2014).

I'm still getting "Bad Gateway" in VLC's debug message...

 

access_http debug: http: server='192.168.0.251' port=8002 file='/1:0:1:11:3:F:FFFF0000:0:0:0:'
main debug: net: connecting to 192.168.0.251 port 8002
main debug: connection succeeded (socket = 1340)
access_http debug: protocol 'HTTP' answer code 502
access_http error: error: HTTP/1.0 502 Bad Gateway
access_http debug: switching to HTTP version 1.0
main debug: net: connecting to 192.168.0.251 port 8002
main debug: connection succeeded (socket = 1340)
access_http debug: protocol 'HTTP' answer code 502
access_http error: error: HTTP/1.0 502 Bad Gateway
main debug: net: connecting to 192.168.0.251 port 8002
main debug: connection succeeded (socket = 1340)
access_mms error: error: HTTP/1.0 502 Bad Gateway
main debug: no access modules matched
main error: open of `http://192.168.0.251:8002/1:0:1:11:3:F:FFFF0000:0:0:0:' failed
main debug: dead input
 

Edited by Erfeniuses, 17 January 2014 - 21:04.

[pepinoogorino]

Bug: Zap button doesn't work on mobile devices. Tested on Android 4.1.2 with Chrome and IOS 6.1.3 with Safari.

OpenWebif hosted by dm800se with latest OpenPli 4.0 build (2014-01-19).

[ims]

I see, several people working on Openwebif still. Is nobody unhappy, that each press of any button starts spinner for cca 2s ? 

Why there cannot be some routine ... when is pressed next button in interval < 2s, run spinner after this last press ?

Then can be pressed sequence of more buttons and spinner will after last press.

[ims]

I think, this:

function pressMenuRemote(code) {
	var timeout = 1000;
	
	if (shiftbutton)
		webapi_execute("/api/remotecontrol?type=long&command=" + code);
	else
		webapi_execute("/api/remotecontrol?command=" + code);
	
	if ($('input[name=remotegrabscreen]').is(':checked'))
	{
		if (lastcontenturl == 'ajax/screenshot')
			setTimeout("grabScreenshot(screenshotMode)", timeout);
		else
			setTimeout("load_maincontent('ajax/screenshot')", timeout);
	}
}

could be changed - when is new code incomming in time less than 500ms, then stop timer for grabbing and start timer again. It seems, that setTimeout("fce",timeout) do not works as timer with "True" in python, but it run new timer again.

function callScreenShot(){
	var timeout = 10;
	if ($('input[name=remotegrabscreen]').is(':checked'))
	{
		if (lastcontenturl == 'ajax/screenshot')
			setTimeout("grabScreenshot(screenshotMode)", timeout);
		else
			setTimeout("load_maincontent('ajax/screenshot')", timeout);
	}
}

var timer = 0;
function pressMenuRemote(code) {
	if (shiftbutton)
		webapi_execute("/api/remotecontrol?type=long&command=" + code);
	else
		webapi_execute("/api/remotecontrol?command=" + code);
	if (timer > 0)
		clearTimeout(timer);
	timer = setTimeout("callScreenShot()", 500);
}

tried, for me it works.  (file openwebif.js)

Edited by ims, 13 February 2014 - 00:43.

[maigais]

I am on your mobile phone testet OpenWebif
up your browser with the standard

http;/ / 195.169.0.102/mobile

everything works well

but i have a question??????
or have anything to do with the plug OpenWebif
application "Phone the STB Notifier"
https://play.google....m.phonetostbapp

because it seems to me that the application "Phone the STB Notifier" no connection
by dreambox
Report on incoming calls and sms do not arrive

I do not know where and how to look for errors!!

http://openpli.org/f...e-3#entry405683

I have android 4.1.2

Attached Files

•  Screenshot_2014-02-13-09-22-17.png   83.3KB   68 downloads
•  dvb t.png   45.6KB   74 downloads
•  iptv.png   83.98KB   62 downloads
•  Screenshot_2014-02-13-08-55-04.png   60.43KB   63 downloads
•  Screenshot_2014-02-13-09-22-17.png   83.3KB   65 downloads
•  Screenshot_2014-02-13-08-57-42.png   35.96KB   55 downloads

Edited by maigais, 13 February 2014 - 08:51.

[maigais]

Bug: Zap button doesn't work on mobile devices. Tested on Android 4.1.2 with Chrome and IOS 6.1.3 with Safari.


OpenWebif hosted by dm800se with latest OpenPli 4.0 build (2014-01-19).

you're right,
did not work

[ims]

Can somebody test if before merging ? Final code for "openwebif.js" . Of course, delay can be set from 500ms back to 1000ms.

function callScreenShot(){
	if ($('input[name=remotegrabscreen]').is(':checked'))
	{
		if (lastcontenturl == 'ajax/screenshot')
			grabScreenshot(screenshotMode);
		else
			load_maincontent('ajax/screenshot');
	}
}

var grabTimer = 0;
function pressMenuRemote(code) {
	if (shiftbutton)
		webapi_execute("/api/remotecontrol?type=long&command=" + code);
	else
		webapi_execute("/api/remotecontrol?command=" + code);
	if (grabTimer > 0)
		clearTimeout(grabTimer);
	grabTimer = setTimeout("callScreenShot()", 500);
}

Edited by ims, 13 February 2014 - 09:22.

[ims]

q: must be there spinner between each pressing RC on Openwebif ? It is not nice for eyes...

 

There could be:

a) rem lines 344,345,348 in openwebif.js

or

make little spinner only in corner.

[korsan]

In Television>Current there is a lot of usefull info except satellite position info.

I think this is important too.

[Erfeniuses]

Hi.

Just Updated VU+Duo2 OpenPLI 4.x to 2014-03-18 version (OWIF 0.2.7)  and still transcoding triggered from UI (or at all) isn't working.

VLC Debug message says error: HTTP/1.0 502 Bad Gateway

[laakkus]

Hi.

Just Updated VU+Duo2 OpenPLI 4.x to 2014-03-18 version (OWIF 0.2.7)  and still transcoding triggered from UI (or at all) isn't working.

VLC Debug message says error: HTTP/1.0 502 Bad Gateway

 

Check your VLC version. I had similar problems, got it working after upgraded VLC >=2.1.3

 

I'm on OpenATV 4.0 now, but hope it helps.

[marfi]

HI,

 

Is it possible to stream only audio by OpenWebIf (normal channel but wihout video)?

[korsan]

Is it possible to start or zap to a media file when in Recordings/Movielist?

I see that only streaming, downloading and deleting are possibly at the moment.

Its just a suggestion.

[dirocca]

Is it possible to start or zap to a media file when in Recordings/Movielist?

I see that only streaming, downloading and deleting are possibly at the moment.

Its just a suggestion.

use RC in webif.

 

grtz Philip

[korsan]

Is it possible to start or zap to a media file when in Recordings/Movielist?

I see that only streaming, downloading and deleting are possibly at the moment.

Its just a suggestion.

use RC in webif.

 

grtz Philip

Thanks, I already know that one.

But its easier when you are able to click the media file, so it will immediately play, such as (channel)services in bouquets.