With new builds I cant get WinTV Nova-T tuner to work anymore. Tried with today's and 2011/11/11 image. After installing drivers and reboot Vu+ UNO does not recognize usb tuner.
Dvb-t tuner works fine updateing old image, but I want to start clean.
21 replies to this topic
Re: usb dvb-t broken #2
-
- Member
- 20 posts
0
Neutral
Posted 18 November 2011 - 15:10
I have the same problem with my dm800. The usb tuner is no longer recognized.
Re: usb dvb-t broken #3
-
- PLi® Core member
- 57,118 posts
+698
Excellent
Posted 18 November 2011 - 15:38
Nova-T is working fine here on a ET box.. I hope that it is not related to the new DMM drivers
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: usb dvb-t broken #4
-
- Senior Member
- 75 posts
+3
Neutral
Posted 18 November 2011 - 15:52
I have problems with Vu+ UNO. And with fresh install. Something is changed with drivers. Maybe problem is that Vu+ and DMM are using old 2.6.18 kernel and ET uses 3.1 kernel.
In my DM800 usb tuner is working fine, but I have only updating it, not installing from scratch.
In my DM800 usb tuner is working fine, but I have only updating it, not installing from scratch.
Re: usb dvb-t broken #5
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 18 November 2011 - 15:57
but what is the reason?
Are drivers not installed anymore?
Or are they not automatically loaded?
Or do they fail to load? (dmesg, missing symbols)
Or are the drivers complaining about missing firmware?
Or does all load fine, but /dev/dvb/adapter1 is not created?
Or /dev/dvb/adapter1 is created, but it contains no frontend0?
Or is everything there, but no vtuner device in /proc/bus/nim_sockets?
Or if you even have the device in nim_sockets, does e2 fail to see or use it?
etc
etc
Are drivers not installed anymore?
Or are they not automatically loaded?
Or do they fail to load? (dmesg, missing symbols)
Or are the drivers complaining about missing firmware?
Or does all load fine, but /dev/dvb/adapter1 is not created?
Or /dev/dvb/adapter1 is created, but it contains no frontend0?
Or is everything there, but no vtuner device in /proc/bus/nim_sockets?
Or if you even have the device in nim_sockets, does e2 fail to see or use it?
etc
etc
Re: usb dvb-t broken #6
-
- Senior Member
- 75 posts
+3
Neutral
Posted 18 November 2011 - 16:05
I allready installed working backup image and can not test today (Family came home). But drivers were installed. Dmesg showed lots of missing symbols.
Re: usb dvb-t broken #7
-
- Senior Member
- 75 posts
+3
Neutral
Posted 18 November 2011 - 16:41
Here
root@vuuno:~# dmesg PID hash table entries: 4096 (order: 12, 16384 bytes) Found MIPS counter frequency: 203 Mhz Using 202.501 MHz high precision timer. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 302848k/524288k available (2761k kernel code, 221192k reserved, 567k data, 148k init, 0k highmem) Calibrating delay loop... 402.43 BogoMIPS (lpj=201216) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. plat_prepare_cpus: ENABLING 2nd Thread... TP0: prom_boot_secondary: Kick off 2nd CPU... CPU revision is: 0002a044 FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, linesize 64 bytes. Synthesized TLB refill handler (23 instructions). Calibrating delay loop... 404.48 BogoMIPS (lpj=202240) Brought up 2 CPUs migration_cost=1000 NET: Registered protocol family 16 PCI->SDRAM window size: 512MB SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42) NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered brcm-pm: disabling power to USB block brcm-pm: disabling power to ENET block brcm-pm: disabling power to SATA block JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A loop: loaded (max 8 devices) brcm-pm: enabling power to ENET block Broadcom BCM7413 P21 Ethernet Network Device v2.0 Aug 30 2011 03:08:15 Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg) bcmemac: no PHY detected on EMAC_1, disabling Broadcom STB NAND controller (BrcmNand Controller) i=0, CS[0] = 0 NAND_CS_NAND_XOR=00000001 Enable XOR on CS#0 brcmnand_probe: CS0: dev_id=ecf10095 After: NandSelect=40000101, nandConfig=15142200 NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB Found NAND: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94 BrcmNAND version = 0x0302 128MB @00000000 brcmnand_probe: CS0: dev_id=ecf10095 After: NandSelect=40000101, nandConfig=15142200 Found NAND chip on Chip Select 0, chipSize=128MB, usable size=128MB, base=0x brcmnand_scan: B4 nand_select = 40000101 brcmnand_scan: After nand_select = 40000101 ACC_CONTROL for SLC NAND: f7ff1010, eccLevel=15 SLC flash: ACC_CONTROL = f7ff1010 page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17 Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000 mtd->oobsize=64, mtd->eccOobSize=16 brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=50, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3 brcmnand_default_bbt: bbt_td = bbt_main_descr Bad block table found at page ffc0, version 0x01 Bad block table found at page ff80, version 0x01 nand_read_bbt: Bad block at 0x01ca0000 nand_read_bbt: Bad block at 0x077a0000 brcmnandCET: Status -> Deferred numchips=1, size=8000000 nandinfo->brcmnand.CS[0] = 0 bcm7XXX_nand_parts=80317078, bcm7XXX_new_partition=80316d28, bcm7XXX_old_partition=80316ec0 numParts=8 Part[0] name=rootfs, size=7200000, offset=0 Part[1] name=kernel, size=400000, offset=7200000 Part[2] name=boot, size=400000, offset=7600000 Part[3] name=splash, size=200000, offset=7a00000 Part[4] name=cfe, size=100000, offset=7c00000 Part[5] name=mac, size=80000, offset=7d00000 Part[6] name=env, size=80000, offset=7d80000 Part[7] name=nvm, size=100000, offset=7e00000 Creating 8 MTD partitions on "bcm7xxx-nand.0": 0x0000000000000000-0x0000000007200000 : "rootfs" 0x0000000007200000-0x0000000007600000 : "kernel" 0x0000000007600000-0x0000000007a00000 : "boot" 0x0000000007a00000-0x0000000007c00000 : "splash" 0x0000000007c00000-0x0000000007d00000 : "cfe" 0x0000000007d00000-0x0000000007d80000 : "mac" 0x0000000007d80000-0x0000000007e00000 : "env" 0x0000000007e00000-0x0000000007f00000 : "nvm" usbmon: debugfs is not available ehci_hcd_brcm_init: Initializing 2 EHCI controller(s) brcm-pm: enabling power to USB block 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0) drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller - USB h/w setup mode <B> - USB power enable set for active HIGH mode brcm-ehci brcm-ehci.0: BRCM EHCI brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1 brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300 brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1) drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2 brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500 brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd_brcm_init: Initializing 2 OHCI controller(s) 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0) drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480408 <-- brcm_start_hc brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3 brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400 usb 1-1: new high speed USB device using brcm-ehci and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1) drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480608 <-- brcm_start_hc brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4 brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600 usb 1-1: configuration #1 chosen from 1 choice usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 usb 1-2: new high speed USB device using brcm-ehci and address 3 usb 1-2: configuration #1 chosen from 1 choice Empty flash at 0x023749d8 ends at 0x02375000 VFS: Mounted root (jffs2 filesystem). Freeing unused kernel memory: 148k freed rtw driver version=v2.0.1212.20101205 usbcore: registered new driver rtw_usb_drv procmk_init dvb_bcm7413: module license 'Proprietary' taints kernel. DVB: registering new adapter (vuuno) enable MII = 0 Booted ! NEXUS_Frontend_GetUserParameters 0 0 bcm7413: hotplug_callback(): Hotplug - status.connected 1 bcm7413: hotplug_callback(): Hotplug - connecting HDMI to display 0xe [GPIO]Default [GPIO]RST Default [GPIO]fpga secu [GP]:brcm_pwm_init brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $ [VID]: <6>bcm7335_video_init [AUD]: <6>bcm7335_audio_init DVB: registering adapter 0 frontend 0 (Vuplus FE)... bcm7413: bcm7335_frontend_init(): vtuner1 : 2 [MPVR]: >> misc_pvr_init input: dreambox advanced remote control (native) as /class/input/input0 [LCD]: registered [CI]:0 1 [CI]: registered ci0 0 [CI]: registered ci1 0 [DFP]: registered dbox fp [DFP]: Scart 9597 is found 4 [SC]: registered sci0 [SC]: registered sci1 system_time_set wakeup mode get system_time_set wakeup mode get 0xc4 fpga update driver loaded i2c /dev entries driver NTFS driver 2.1.27 [Flags: R/W MODULE]. rtusb init ---> usbcore: registered new driver rt2870 usbcore: registered new driver rt73 libata version 2.00 loaded. brcm-pm: enabling power to SATA block sata_svw 0000:01:00.0: version 4.0 PCI: Enabling device 0000:01:00.0 (0000 -> 0003) ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42 ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42 scsi0 : sata_svw ata1: SATA link down (SStatus 4 SControl 300) ATA: abnormal status 0x7F on port 0xb051001c scsi1 : sata_svw ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000) ata2.00: ATA-7, max UDMA7, 1953525168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 0 ata2.00: configured for UDMA/133 Vendor: ATA Model: SAMSUNG HD103SI Rev: 1AG0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 1:0:0:0: Attached scsi disk sda sd 1:0:0:0: Attached scsi generic sg0 type 0 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. dvb_usb_dib0700: Unknown symbol dib7000p_set_gpio dvb_usb_dib0700: Unknown symbol dib0090_get_tune_state dvb_usb_dib0700: Unknown symbol dib7000m_get_i2c_master dvb_usb_dib0700: Unknown symbol dib0070_ctrl_agc_filter dvb_usb_dib0700: Unknown symbol dib0090_set_tune_state dvb_usb_dib0700: Unknown symbol dib7000p_get_i2c_master dvb_usb_dib0700: Unknown symbol dvb_usb_get_hexline dvb_usb_dib0700: Unknown symbol dib8000_set_tune_state dvb_usb_dib0700: Unknown symbol dib8000_attach dvb_usb_dib0700: Unknown symbol dib0090_register dvb_usb_dib0700: Unknown symbol dib0090_pwm_gain_reset dvb_usb_dib0700: Unknown symbol dib3000mc_i2c_enumeration dvb_usb_dib0700: Unknown symbol dib7000pc_detection dvb_usb_dib0700: Unknown symbol dib7000p_i2c_enumeration dvb_usb_dib0700: Unknown symbol dib7000p_set_wbd_ref dvb_usb_dib0700: Unknown symbol dib8000_get_adc_power dvb_usb_dib0700: Unknown symbol dib0090_get_wbd_offset dvb_usb_dib0700: Unknown symbol dib8000_set_gpio dvb_usb_dib0700: Unknown symbol dib3000mc_attach dvb_usb_dib0700: Unknown symbol dib0090_get_current_gain dvb_usb_dib0700: Unknown symbol dib8000_set_wbd_ref dvb_usb_dib0700: Unknown symbol dib7000p_pid_filter dvb_usb_dib0700: Unknown symbol dib3000mc_get_tuner_i2c_master dvb_usb_dib0700: Unknown symbol dib0090_dcc_freq dvb_usb_dib0700: Unknown symbol dib7000p_attach dvb_usb_dib0700: Unknown symbol dib0070_wbd_offset dvb_usb_dib0700: Unknown symbol dib8000_pid_filter_ctrl dvb_usb_dib0700: Unknown symbol dvb_usb_device_init dvb_usb_dib0700: Unknown symbol dib0070_attach dvb_usb_dib0700: Unknown symbol dib0090_gain_control dvb_usb_dib0700: Unknown symbol dib8000_i2c_enumeration dvb_usb_dib0700: Unknown symbol dvb_usb_device_exit dvb_usb_dib0700: Unknown symbol dib7000m_attach dvb_usb_dib0700: Unknown symbol dib7000p_pid_filter_ctrl dvb_usb_dib0700: Unknown symbol dib8000_pwm_agc_reset dvb_usb_dib0700: Unknown symbol dib8000_get_i2c_master dvb_usb_dib0700: Unknown symbol dib8000_pid_filter dvb_usb_dibusb_common: Unknown symbol dvb_usb_nec_rc_key_to_event dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_rw dvb_usb_dibusb_common: Unknown symbol dvb_pll_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_set_config dvb_usb_dibusb_common: Unknown symbol dib3000mc_get_tuner_i2c_master dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_control dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_write dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_parse dvb_usb_dibusb_common: Unknown symbol dvb_usb_nec_rc_key_to_event dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_rw dvb_usb_dibusb_common: Unknown symbol dvb_pll_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_set_config dvb_usb_dibusb_common: Unknown symbol dib3000mc_get_tuner_i2c_master dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_control dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_write dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_parse dvb_usb_dibusb_common: Unknown symbol dvb_usb_nec_rc_key_to_event dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_rw dvb_usb_dibusb_common: Unknown symbol dvb_pll_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_attach dvb_usb_dibusb_common: Unknown symbol dib3000mc_set_config dvb_usb_dibusb_common: Unknown symbol dib3000mc_get_tuner_i2c_master dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_control dvb_usb_dibusb_common: Unknown symbol dvb_usb_generic_write dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_parse usbcore: registered new driver r871x_usb_drv [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 isa bounce pool size: 16 pages Vendor: Model: USB FLASH DRIVE Rev: PMAP Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 15663104 512-byte hdwr sectors (8020 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 15663104 512-byte hdwr sectors (8020 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 [LCD]: unknown cmd 0x1015 [CI]:ci_dev_open [CI]:entering.. A NEXUS_DvbCi_Open [CI]:NEXUS_DvbCi_Open done.. [CI]:Installing callbacks [CI]:Forcing card check [CI]:Card insertion status changed [CI]:entering.. B NEXUS_DvbCi_Open [CI]:NEXUS_DvbCi_Open done.. [CI]:Installing callbacks [CI]:Forcing card check [CI]:Card B insertion status changed [CI]: CI interface initialised [CI]:ci1_dev_open [AUD]: AUDIO_SET_MUTE 0 [AUD]: AUDIO_SET_MIXER -2137678368 [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [AUD]: AUDIO_SET_MIXER -2137678368 [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32 [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
Re: usb dvb-t broken #8
-
- Senior Member
- 1,297 posts
+41
Good
Posted 18 November 2011 - 16:47
i had same problems on mine box. I uninstalled drivers and installed them again and this helped!
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
Re: usb dvb-t broken #9
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 18 November 2011 - 17:06
what does modules.dep (somewhere in /lib/modules/2.6.18) look like?
Is (for instance) the 7000p dependency indeed missing for dib0700?
And if you run 'depmod -a', does that fix the dependencies?
Is (for instance) the 7000p dependency indeed missing for dib0700?
And if you run 'depmod -a', does that fix the dependencies?
Re: usb dvb-t broken #10
-
- Senior Member
- 75 posts
+3
Neutral
Posted 19 November 2011 - 11:29
Still the same with todays build. Uninstalling and reinstalling drivers did not help.
In modules.dep is line
In modules.dep is line
kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko: kernel/drivers/media/common/tuners/mt2266.ko
kernel/drivers/media/common/tuners/mxl5007t.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/common/tuners/mt2266.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/common/tuners/mt2060.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/common/tuners/tuner-xc2028.ko: kernel/drivers/base/firmware_class.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/common/tuners/xc5000.ko: kernel/drivers/base/firmware_class.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/frontends/lgdt3305.ko: kernel/drivers/media/dvb/dvb-core/dvb-core.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/frontends/s5h1411.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/frontends/dib3000mb.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/dvb-core/dvb-core.ko: kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko: kernel/drivers/media/common/tuners/mt2060.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko: kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko kernel/drivers/media/common/tuners/mt2060.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko: kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko kernel/drivers/media/common/tuners/mt2060.ko kernel/drivers/media/dvb/frontends/dib3000mb.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko: kernel/drivers/media/common/tuners/mt2266.ko kernel/drivers/media/common/tuners/tuner-xc2028.ko kernel/drivers/media/common/tuners/mxl5007t.ko kernel/drivers/media/common/tuners/xc5000.ko kernel/drivers/base/firmware_class.ko kernel/drivers/media/dvb/frontends/s5h1411.ko kernel/drivers/media/common/tuners/mt2060.ko kernel/drivers/media/dvb/frontends/lgdt3305.ko kernel/drivers/media/dvb/dvb-core/dvb-core.ko kernel/drivers/input/input.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/input/input.ko: kernel/drivers/input/mousedev.ko: kernel/drivers/input/input.ko kernel/drivers/input/evdev.ko: kernel/drivers/input/input.ko kernel/drivers/cdrom/cdrom.ko: kernel/drivers/scsi/sr_mod.ko: kernel/drivers/cdrom/cdrom.ko kernel/drivers/base/firmware_class.ko: kernel/drivers/usb/serial/usbserial.ko: kernel/drivers/usb/storage/usb-storage.ko: kernel/drivers/usb/net/asix.ko: kernel/drivers/usb/net/usbnet.ko kernel/drivers/usb/net/usbnet.ko: kernel/drivers/usb/net/pegasus.ko: kernel/drivers/net/wireless/rt3070sta.ko: kernel/drivers/net/8192cu.ko: kernel/drivers/net/8712u.ko: kernel/drivers/net/rt73.ko: kernel/drivers/i2c/i2c-core.ko: kernel/drivers/i2c/i2c-dev.ko: kernel/drivers/i2c/i2c-core.ko kernel/drivers/ata/libata.ko: kernel/drivers/ata/sata_svw.ko: kernel/drivers/ata/libata.ko kernel/sound/soundcore.ko: kernel/sound/core/snd-pcm.ko: kernel/sound/core/snd-timer.ko kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/sound/core/snd-page-alloc.ko kernel/sound/core/snd.ko: kernel/sound/soundcore.ko kernel/sound/core/snd-timer.ko: kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/sound/core/snd-page-alloc.ko: kernel/sound/core/oss/snd-pcm-oss.ko: kernel/sound/core/snd-pcm.ko kernel/sound/core/snd-timer.ko kernel/sound/core/snd-page-alloc.ko kernel/sound/core/oss/snd-mixer-oss.ko kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/sound/core/oss/snd-mixer-oss.ko: kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/fs/exportfs/exportfs.ko: kernel/fs/smbfs/smbfs.ko: kernel/fs/msdos/msdos.ko: kernel/fs/fat/fat.ko kernel/fs/isofs/isofs.ko: kernel/fs/vfat/vfat.ko: kernel/fs/fat/fat.ko kernel/fs/ntfs/ntfs.ko: kernel/fs/ext2/ext2.ko: kernel/fs/cifs/cifs.ko: kernel/fs/udf/udf.ko: kernel/fs/nls/nls_utf8.ko: kernel/fs/nls/nls_iso8859-15.ko: kernel/fs/nls/nls_cp850.ko: kernel/fs/fat/fat.ko: extra/procmk.ko: extra/dvb-bcm7413.ko: kernel/drivers/media/dvb/dvb-core/dvb-core.ko kernel/sound/core/snd-pcm.ko kernel/sound/core/snd-timer.ko kernel/sound/core/snd-page-alloc.ko kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/drivers/input/input.ko kernel/drivers/i2c/i2c-core.ko extra/procmk.ko extra/brcmfb.ko: extra/dvb-bcm7413.ko kernel/drivers/media/dvb/dvb-core/dvb-core.ko kernel/sound/core/snd-pcm.ko kernel/sound/core/snd-timer.ko kernel/sound/core/snd-page-alloc.ko kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/drivers/input/input.ko kernel/drivers/i2c/i2c-core.ko extra/procmk.ko extra/fpga_directc.ko: extra/dvb-bcm7413.ko kernel/drivers/media/dvb/dvb-core/dvb-core.ko kernel/sound/core/snd-pcm.ko kernel/sound/core/snd-timer.ko kernel/sound/core/snd-page-alloc.ko kernel/sound/core/snd.ko kernel/sound/soundcore.ko kernel/drivers/input/input.ko kernel/drivers/i2c/i2c-core.ko extra/procmk.ko
Re: usb dvb-t broken #11
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 19 November 2011 - 11:37
ok, that line is missing several deps.
Does depmod -a fix it?
Does depmod -a fix it?
Re: usb dvb-t broken #12
-
- Senior Member
- 75 posts
+3
Neutral
Posted 19 November 2011 - 11:47
This is after running depmod -a, so appearently no.
Re: usb dvb-t broken #13
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 19 November 2011 - 12:01
is kernel/drivers/media/dvb/frontends/dib7000p.ko, for instance, installed at all?
perhaps depmod cannot do it's job because drivers are missing
perhaps depmod cannot do it's job because drivers are missing
Re: usb dvb-t broken #14
-
- Senior Member
- 75 posts
+3
Neutral
Posted 19 November 2011 - 16:17
dvb-usb.ko is missing, other files are there. After placing it there and running depmod -a, that line in modules.dep
kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko: kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko
Edited by rimas, 19 November 2011 - 16:17.
Re: usb dvb-t broken #15
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 19 November 2011 - 16:28
weird, so that removes the dependency
kernel/drivers/media/common/tuners/mt2266.ko
from the modules.dep?
Something must be really wrong with depmod...
kernel/drivers/media/common/tuners/mt2266.ko
from the modules.dep?
Something must be really wrong with depmod...
Re: usb dvb-t broken #16
-
- Senior Member
- 75 posts
+3
Neutral
Posted 19 November 2011 - 16:44
After installing drivers appears something like that
Fatal: module dvb-dibusb-dib0700 not found
Fatal: module dvb-dibusb-mb not found
Fatal: module dvb-dibusb-mc not found
Fatal: module dvb-dibusb-common not found
But this message was there earlier too, when usb tuner worked.
Fatal: module dvb-dibusb-dib0700 not found
Fatal: module dvb-dibusb-mb not found
Fatal: module dvb-dibusb-mc not found
Fatal: module dvb-dibusb-common not found
But this message was there earlier too, when usb tuner worked.
Re: usb dvb-t broken #17
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 19 November 2011 - 17:09
yes, modprobe runs inbetween installs. Has always been like that. Bug in opkg (and previously ipkg), not easy to solve.
Re: usb dvb-t broken #18
-
- Senior Member
- 122 posts
+6
Neutral
Posted 19 November 2011 - 21:08
Is this related to just Uno or all the models?
Sony VPL-HW55ES + Stewart Firehawk 182cm, 2 * Nvidia Shield, LibreElec + 5 * Intel NUC, Vu+ Uno4k & T90+8lnb, 28Tb Thecus N7510 NAS, Denon AVR-X1100W, AMX+ 3*Ipad, 3*KefQ1, 4*KefQ2DS, Elac S12EQ
Re: usb dvb-t broken #19
-
- Senior Member
- 75 posts
+3
Neutral
Posted 21 November 2011 - 14:08
Thanks for the fix. 
Edited by rimas, 21 November 2011 - 14:09.
Re: usb dvb-t broken #20
-
- Member
- 11 posts
+2
Neutral
Posted 3 December 2011 - 20:30
How did you fix the problem? I can't see my WinTV-NOVA-T-Stick in OpenPli.
Also tagged with one or more of these keywords: Vu+ UNO
Tsjechische zenders (Skylink) op VU+ uno 4k SEStarted by Clansman, 5 May 2023  Tsechie, vu+ uno, skylink, cam803
|
|
|
||
 |
SkyLink Czech TV with CAM803 CI+ on VU+ uno 4K SEStarted by Clansman, 5 May 2023 skylink, czech, CAM803, VU+ uno
|
|
|
|
OpenUitzendingGemist Crash VU+ Uno na openen RTL AZStarted by Skytrapper, 1 Apr 2015 Vu+ Uno
|
|
|
||
[Vu+ Uno] Mytube "app"Started by ZeroCola, 20 Dec 2012 VU+ Uno
|
|
|
||
Enigma 2 start niet automatisch op de VU+ Uno met OpenPLi 3.0Started by Patrick Kersten, 19 Sep 2012 VU+ Uno
|
|
|
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
