2072 replies to this topic

[momi133]

I install e2pc-py3 but it does't show any satellite options in menu like tuner setting, manual search,fastscan,...`

 

Also I created nim_sockets and copy it to /usr/local/e2/etc/tuxbox.

 

plz help to use e2pc with DVB tuners

 dmesg | grep frontend
[    3.288867] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[    3.415840] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[    3.664650] TBSECP3 driver 0000:05:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[    3.893448] TBSECP3 driver 0000:05:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6902 DVB-S/S2 )...
[   14.029564] /usr/src/OpenPLi-PC_Python3-master/dvbsoftwareca-5x/dvb_softwareca.c: frontend loopback driver v0.0.5x

 

 

Attached Files

•  Screenshot from 2024-09-19 15-02-21.png   292.74KB   0 downloads

Edited by momi133, 19 September 2024 - 14:00.

[NadjmGharib]

Hi momi133

See post 2026 on page 102. The solution is there

[starbuck]

I had an error compiling the newer build.
 

      |                                                          int
  CXX      dvb/eit.o
  CXX      dvb/epgcache.o
  CXX      dvb/epgchanneldata.o
  CXX      dvb/epgtransponderdatareader.o
  CXX      dvb/esection.o
  CXX      dvb/fastscan.o
  CXX      dvb/filepush.o
  CXX      dvb/frontend.o
  CXX      dvb/frontendparms.o
  CXX      dvb/metaparser.o
dvb/frontend.cpp: In member function ‘std::string eDVBFrontend::getCapabilities()’:
dvb/frontend.cpp:3243:22: error: ‘SYS_DVBC2’ was not declared in this scope; did you mean ‘SYS_DVBT2’?
 3243 |                 case SYS_DVBC2:         ss << " DVBC2"; break;
      |                      ^~~~~~~~~
      |                      SYS_DVBT2
make[3]: *** [Makefile:1957: dvb/frontend.o] Fehler 1
make[3]: *** Es wird auf noch nicht beendete Prozesse gewartet....
make[3]: Verzeichnis „/usr/src/OpenPLi-PC_Python3/enigma2/lib“ wird verlassen
make[2]: *** [Makefile:3036: install-recursive] Fehler 1
make[2]: Verzeichnis „/usr/src/OpenPLi-PC_Python3/enigma2/lib“ wird verlassen
make[1]: *** [Makefile:3195: install] Fehler 2
make[1]: Verzeichnis „/usr/src/OpenPLi-PC_Python3/enigma2/lib“ wird verlassen
make: *** [Makefile:553: install-recursive] Fehler 1

*****************************************************************
AN ERROR OCCURED WHILE BUILDING OpenPliPC - SECTION MAKE INSTALL!

It's related to this patch "patch-69a69f4b-to-PC.patch".

 

What about this code change?
 

@@ -3240,6 +3240,7 @@
         case SYS_DVBT2:        ss << " DVBT2"; break;
         case SYS_TURBO:        ss << " TURBO"; break;
         case SYS_DTMB:        ss << " DTMB"; break;
+        case SYS_DVBC2:        ss << " DVBC2"; break;
         }
     }

As the error says "SYS_DVBC2" is nowhere declared. Is there some extra code missing? Implementation of the DVB-C2 Standard???

 

I have commented it out and compilation works as expected.

[1455]

 

As the error says "SYS_DVBC2" is nowhere declared. Is there some extra code missing? Implementation of the DVB-C2 Standard???

 

I have commented it out and compilation works as expected.

 

<- /usr/src/linux-lowlatency-headers-6.8.0-38/include/uapi/linux/dvb/frontend.h
 

Edited by 1455, 2 December 2024 - 15:58.

[1455]

Important update for py3:
In the new environment, there were some annoying horizontal image breaks.

[NadjmGharib]

Has anyone tried stream relay on oscam?

I tried a lot with German Sky channels Astra 19,But crashes always happen.

Note that this technology works on Enigma 2 receiver.

[Dimitrij]

oscam in feed work fine for stream relay German Sky channels Astra 19.2E.

[WanWizard]

Define "crashes".

[Tech]

oscam in feed work fine for stream relay German Sky channels Astra 19.2E.

I can confirm that too.

[Abu Baniaz]

You are using satellite receivers. This thread is for people using Enigma2 on a PC. 

[NadjmGharib]

You are using satellite receivers. This thread is for people using Enigma2 on a PC. 

 

Yes, I mean on OpenPLi-PC_Python3 on ubuntu 24.04

[Abu Baniaz]

Not to worry, the two threads get mixed up often. Maybe a moderator can retitle them again to avoid confusion.

 

This thread

How to build Enigma2 to run on your laptop/PC running Ubuntu

 

Other tread:

How to build OpenPli for your receiver using Ubuntu

(will become redundant when the docker images become available)

 

Anyway, just saying "it crashes" is not very useful. Is there a crashlog? Please also confirm if you are building Enigma2 from PLI's Developer branch?

[NadjmGharib]

I think you didn't understand me. I don't have a receiver

I have a sat card and i install Enigma2 on a PC  ubuntu 24.04

Encrypted channels work on OSCAM. But the stream relay is not working

sorry! i dont speak english