2072 replies to this topic

[subixonfire]

yes i have run build_libs.sh
i can run it again and post a full output on pastebin...

[nobody9]

please post your startup log of enigma2

yes i have run build_libs.sh
i can run it again and post a full output on pastebin...

[subixonfire]

openplipc runtime output:
http://pastebin.com/4WMUHcK2

build_libs output (to large for pastebin):
http://ubuntuone.com...N5IvxOnDS5EBOMr

build_enigma2 output (to large for pastebin):
http://ubuntuone.com...VsCPv3B0mDmAUIq

[nobody9]

@subixonfire,

please checkout the new version on github.
I had copyed a work xinlib_patch where the input_enigma module was not enabled.

nobody9

openplipc runtime output:
http://pastebin.com/4WMUHcK2

build_libs output (to large for pastebin):
http://ubuntuone.com...N5IvxOnDS5EBOMr

build_enigma2 output (to large for pastebin):
http://ubuntuone.com...VsCPv3B0mDmAUIq

[subixonfire]

Something is wrong with xinelib_patch in git, it just has a loot info about some translation project???

[nobody9]

you can ignore it

Something is wrong with xinelib_patch in git, it just has a loot info about some translation project???

[subixonfire]

All working, thank you allot!

Edited by subixonfire, 12 December 2011 - 20:08.

[telping]

hello, good job, there is a slight problem with the patch for lib-xine at least for me, it removes support for LATM AAC with ffmpeg.

can be solved?


Thank you very much.

[subixonfire]

Is there a way to add plug-ins/extensions/skins to this enigma...
A short howto would be greatly appreciated!
Or maybe just if someone points me in right direction?
I have a some experience in general Linux software compiling, but none in enigma2..

[nobody9]

@telping,

i have submitted a new xine-lib patch to git. It´s not activatet.
Checkout
change in build_libs.sh

xinelib_20111212.patch to xinelib_20111213.patch and rebuild.

When it´s ok i will activate the patch as default.

nobody9

hello, good job, there is a slight problem with the patch for lib-xine at least for me, it removes support for LATM AAC with ffmpeg.

can be solved?


Thank you very much.

[telping]

hello again, thanks for the new patch.
well in xine-lib with the new patch is correct functioning of the AAC_LATM and vdr is working properly with the audio.
in enigma2 have this problem:
I have sound but with cuts and strange sounds.

the same channel on vdr works grate video and audio - vdr-plugin-xinelibouput

ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
FLUSHuf_ctrl: vid 20% 3,0s 1624kbps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
CA_SET_DESCR ca_num 0000, idx 0, parity 1, cw 51...1A0s 16kbps 0, on
adapter0/demux0 idx 0: late key set...
demux_ts: error ba 8e 53 (should be 0x000001) 0% 2,0s 8kbps 0, on
demux_ts: PID 0x1081: corrupted pes encountered
adapter0/demux0 idx 0: change to even keyaud 0% 2,0s 16kbps 0, on
adapter0/demux0 idx 0: even key not ready (500 ms)
[EPGC] 2498840 bytes for cache usedps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 8kbps 0, on
adapter0/demux0 idx 0: timed out. proceeding anyways,0s 8kbps 0, on
demux_ts: error ab b8 e8 (should be 0x000001) 0% 1,0s 8kbps 0, on
demux_ts: PID 0x1082: corrupted pes encountered
demux_ts: error 8b 11 cf (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
demux_ts: error 30 a1 5f (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
demux_ts: error 30 a9 24 (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
[aac_latm @ 0xaa328920] Prediction is not allowed in AAC-LC.kbps 0, on
ffmpeg_audio_dec: error decompressing audio frame (-1)
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: error decompressing audio frame (-1094995529)s 0, on
audio jump, diff=59283
audio jump, diff=86160 3,0s 1400kbps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 40kbps 0, on
fixing sound card drift by 3228 ptsps 0, aud 1% 2,0s 48kbps 0, on
ffmpeg_audio_dec: not enough data to decode
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 24kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 24kbps 0, on
fixing sound card drift by 2449 ptsps 0, aud 0% 1,0s 24kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 24kbps 0, on
fixing sound card drift by 2415 ptsps 0, aud 0% 2,0s 24kbps 0, on

best regards

[nobody9]

@telping,
it was late last night, i only implement the standart patches for enigma2. So im must
implement some more fixes for enigma2, i hop that i can make this in the next days.
for me was only a version to test audio with LATM AAC with ffmpeg.
regards

hello again, thanks for the new patch.
well in xine-lib with the new patch is correct functioning of the AAC_LATM and vdr is working properly with the audio.
in enigma2 have this problem:
I have sound but with cuts and strange sounds.

the same channel on vdr works grate video and audio - vdr-plugin-xinelibouput

ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
FLUSHuf_ctrl: vid 20% 3,0s 1624kbps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
CA_SET_DESCR ca_num 0000, idx 0, parity 1, cw 51...1A0s 16kbps 0, on
adapter0/demux0 idx 0: late key set...
demux_ts: error ba 8e 53 (should be 0x000001) 0% 2,0s 8kbps 0, on
demux_ts: PID 0x1081: corrupted pes encountered
adapter0/demux0 idx 0: change to even keyaud 0% 2,0s 16kbps 0, on
adapter0/demux0 idx 0: even key not ready (500 ms)
[EPGC] 2498840 bytes for cache usedps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 8kbps 0, on
adapter0/demux0 idx 0: timed out. proceeding anyways,0s 8kbps 0, on
demux_ts: error ab b8 e8 (should be 0x000001) 0% 1,0s 8kbps 0, on
demux_ts: PID 0x1082: corrupted pes encountered
demux_ts: error 8b 11 cf (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
demux_ts: error 30 a1 5f (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
demux_ts: error 30 a9 24 (should be 0x000001)
demux_ts: PID 0x1081: corrupted pes encountered
[aac_latm @ 0xaa328920] Prediction is not allowed in AAC-LC.kbps 0, on
ffmpeg_audio_dec: error decompressing audio frame (-1)
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: error decompressing audio frame (-1094995529)s 0, on
audio jump, diff=59283
audio jump, diff=86160 3,0s 1400kbps 0, aud 0% 2,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 16kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 40kbps 0, on
fixing sound card drift by 3228 ptsps 0, aud 1% 2,0s 48kbps 0, on
ffmpeg_audio_dec: not enough data to decode
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 24kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 1,0s 24kbps 0, on
fixing sound card drift by 2449 ptsps 0, aud 0% 1,0s 24kbps 0, on
ffmpeg_audio_dec: not enough data to decoded 0% 2,0s 24kbps 0, on
fixing sound card drift by 2415 ptsps 0, aud 0% 2,0s 24kbps 0, on

best regards

[nobody9]

@subixonfire,

plugins in /usr/local/lib/enigma2/python/Plugins Extensions or SystemPlugins
skins in /usr/local/share/enigma2

sorry for the short answer.

Is there a way to add plug-ins/extensions/skins to this enigma...
A short howto would be greatly appreciated!
Or maybe just if someone points me in right direction?
I have a some experience in general Linux software compiling, but none in enigma2..

[Seal]

Channels SD works very well but there is problem with HD channels - sound is chopping.

On channels SD buffer looks good:
...
net_buf_ctrl: vid 71% 2,0s 4752kbps 0, aud 8% 2,0s 448kbps 0, on
...

But on channels SD buffer if full on polish TVN HD is very choppy, but on Polish Canal+ HD works well...

...
net_buf_ctrl: vid 100% 1,0s 9040kbps 0, aud 0% 0,0s 320kbps 0, on
net_buf_ctrl: vid 100% 1,0s 9040kbps 0, aud 0% 0,0s 320kbps 0, on
net_buf_ctrl: vid 99% 1,0s 9032kbps 0, aud 0% 0,0s 320kbps 0, on
net_buf_ctrl: vid 100% 1,0s 9032kbps 0, aud 0% 0,0s 320kbps 0, on

...

My system is UBUNTU 10.04.3 desktop with newest compilation of xline lib (with today patch).

But this looks very very promising

Edited by Seal, 13 December 2011 - 20:43.

[nobody9]

@telping,Seal,

i commited a new patch please try it. xinelib_20111214.patch.

@Seal,

in /usr/local/share/enigma2/xine.conf
change the values:

engine.buffers.audio_num_buffers:500
to
engine.buffers.audio_num_buffers:1000

and

engine.buffers.video_num_buffers:1000
to
engine.buffers.video_num_buffers:2000 or higher

regards

nobody9

[ambrosa]

@all,

I'm a PLi image fan and also a plugin developer. Currently I'm working on a new e2 Panel with "exclusive" features. One of them is copying EPG from a channel to another one on memory without XML files or any internet connection to rytec like servers. I'll release my panel in a month and share it with the PLi community.

CrossEPG plugin do this.
In the past I've added to CrossEPG the script capability (written with Python).
One script of mine included in CrossEPG is "alias" that copy EPG from one channel to another.

[ambrosa]

INFO
Yesterday nobody9 has applied my suggestion to change main install directory.

Now all Enigma2 files are installed under

/usr/local/e2/

Now it's simple to remove e2 :
sudo rm -Rf /usr/local/e2

See README for further infos.

[shumifan50]

I am trying to build the libs using build_libs.sh.
In a standard ubuntu desktop the following was mssing:
autoconf - "sudo apt-get install autoconf" solved it
libtool - "sudo apt-get install libtool" solved it
autopoint - "sudo apt-get install autpoint" solved it

Now it is looking for zlib - it is a bit more complicated as it has to be built: see here for good instructions to install
_http://www.techsww.com/tutorials/libraries/zlib/installation/installing_zlib_on_ubuntu_linux.php

[shumifan50]

Now stuck: it requires libXext.
I get the following:

:~/openpliPC$ sudo find / -name libXext*
/usr/lib/libXext.so.6
/usr/lib/libXext.so.6.4.0
/usr/lib/libXext.a
/usr/lib/libXext.so

and
~/openpliPC$ ls -l /usr/lib/libXex*
-rw-r--r-- 1 root root 78156 2010-07-13 15:51 /usr/lib/libXext.a
lrwxrwxrwx 1 root root 16 2011-12-15 14:50 /usr/lib/libXext.so -> libXext.so.6.4.0
lrwxrwxrwx 1 root root 16 2010-11-15 15:03 /usr/lib/libXext.so.6 -> libXext.so.6.4.0
-rw-r--r-- 1 root root 60024 2010-07-13 15:51 /usr/lib/libXext.so.6.4.0

I get this error:
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for main in -lXext... no
configure: error: libXext is required
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
*

Now I am stumped as the file is there - is it a version issue?
Any help appreciated.

[nobody9]

Wich Version of Ubuntu you have.
The Script build_libs.sh Install all requirierd libs and build Tools.

Nobody9

(null)