2062 replies to this topic

[nfvdr]

nobody9 I`m Sorry about that.
Can you tell me where can i get the answer? which forum?

[Pr2]

Hi,

I just install a brand new Ubuntu 10.10 and test the script. There is one package that needs to be installed by build_libs.sh script (which is not): debhelper

sudo apt-get install debhelper

This is needed in order to use: dpkg-buildflags command which is used in this script.

For example the libdvbsi++ compilation and installation is using it, without it the compilation of openpliPC doesn't work.

Question:

Is it normal that I need to launch E2 with sudo? Without it it kill itself.

Pr2

[nobody9]

yes,
at the momment some files are only accessible over root

Question:

Is it normal that I need to launch E2 with sudo? Without it it kill itself.

Pr2

[Seal]

yes,
at the momment some files are only accessible over root

nope... i chowned /usr/local/e2 with user im running enigma and /media/hdd and /hdd and works fine

[betacentauri]

You did a great work (especially nobody9)!!

E2 runs here with one exception without problems (with vtuner on a ET9200).

The exception is the OSD. I have a ATI graphic card and OSD isn't visible.
I searched many hours to understand how it works and why OSD isn't visible. The quick answer is that overlays are only visible
with the vdpau driver. For all other drivers it's not implemented

But I wanted to see a OSD, so I'm implemented one (not with overlays, I use normal xine OSD).
I can see a OSD, but currently the implementation isn't really nice (at most alpha status).
Drawing an OSD with xine is really ugly. I have to convert the rgb E2 OSD to yuv and have to shrink used colors to 256 (indexed image).

So I only wanted you to know that I'm working on it. I hope, that I can finish it in the next 1-2 weeks. I'll post the code when it's done.

[nobody9]

many thanks,

for this information of your progress of implementation the OSD.
I´m very impressed over this.

regards and a Happy New Year 2012

nobody9

You did a great work (especially nobody9)!!

E2 runs here with one exception without problems (with vtuner on a ET9200).

The exception is the OSD. I have a ATI graphic card and OSD isn't visible.
I searched many hours to understand how it works and why OSD isn't visible. The quick answer is that overlays are only visible
with the vdpau driver. For all other drivers it's not implemented

But I wanted to see a OSD, so I'm implemented one (not with overlays, I use normal xine OSD).
I can see a OSD, but currently the implementation isn't really nice (at most alpha status).
Drawing an OSD with xine is really ugly. I have to convert the rgb E2 OSD to yuv and have to shrink used colors to 256 (indexed image).

So I only wanted you to know that I'm working on it. I hope, that I can finish it in the next 1-2 weeks. I'll post the code when it's done.

[ambrosa]

My Christmas gift: new CPU and GPU

qvdpautest 0.5.1
Intel® Core™ i7-2600 CPU @ 3.535GHz
ASUS NVIDIA GPU GeForce GTX 550 Ti (GF116) at PCI:1:0:0 (GPU-0) clock 910MHz , 1GB DDR5
VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library 280.13 Wed Jul 27 17:15:20 PDT 2011

SURFACE GET BITS: 1673.12 M/s
SURFACE PUT BITS: 2236.99 M/s

MPEG DECODING (1920x1080): 101 frames/s
MPEG DECODING (1280x720): 229 frames/s
H264 DECODING (1920x1080): 60 frames/s
H264 DECODING (1280x720): 132 frames/s
VC1 DECODING (1440x1080): 76 frames/s
MPEG4 DECODING (1920x1080): 68 frames/s

MIXER WEAVE (1920x1080): 345 frames/s
MIXER BOB (1920x1080): 488 fields/s
MIXER TEMPORAL (1920x1080): 231 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 196 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 286 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 120 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 107 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 131 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 340 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 221 fields/s

MULTITHREADED MPEG DECODING (1920x1080): 102 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 210 fields/s

[Pa0l0ne]

My Christmas gift: new CPU and GPU

qvdpautest 0.5.1
Intel® Core™ i7-2600 CPU @ 3.535GHz
ASUS NVIDIA GPU GeForce GTX 550 Ti (GF116) at PCI:1:0:0 (GPU-0) clock 910MHz , 1GB DDR5
VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library 280.13 Wed Jul 27 17:15:20 PDT 2011

SURFACE GET BITS: 1673.12 M/s
SURFACE PUT BITS: 2236.99 M/s

MPEG DECODING (1920x1080): 101 frames/s
MPEG DECODING (1280x720): 229 frames/s
H264 DECODING (1920x1080): 60 frames/s
H264 DECODING (1280x720): 132 frames/s
VC1 DECODING (1440x1080): 76 frames/s
MPEG4 DECODING (1920x1080): 68 frames/s

MIXER WEAVE (1920x1080): 345 frames/s
MIXER BOB (1920x1080): 488 fields/s
MIXER TEMPORAL (1920x1080): 231 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 196 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 286 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 120 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 107 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 131 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 340 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 221 fields/s

MULTITHREADED MPEG DECODING (1920x1080): 102 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 210 fields/s

Looks impressive! is it the performance on hd channel good?

[ambrosa]

I've just physically rebuild my new PC and I've installed from scratch Kubuntu 11.10. GREAT !
I've not time during these days to test openpliPC in my new environment but I suppose that I will have no problem at all about HD channels.

I'm not interested in a media center or HTPC. openpliPC for me it's a debug layer for testing DVB-T driver.
I watch TV with my Clarke Tech ET9100

[betacentauri]

many thanks,

for this information of your progress of implementation the OSD.
I´m very impressed over this.

regards and a Happy New Year 2012

nobody9

Thanks!

I have attached 2 screenshots, how it currently looks like(not really good, but you can use E2).

Attached Files

•  Bildschirmfoto am 2011-12-30 13:00:03.png   102.28KB   109 downloads
•  Bildschirmfoto am 2011-12-30 13:03:02.png   462.99KB   114 downloads

[betacentauri]

I have good news!

I found another way to show the OSD(currently only for opengl driver). It's much better than the other solution,
because I don't need the yuv conversion and the color reduction.

Here is a new screenshot.

As you can see I have a problem with the osd size. It's too small and 2 times visible.

Best regards,
Betacentauri

Attached Files

•  Bildschirmfoto am 2011-12-31 01:33:31.png   450.49KB   81 downloads

[balans]

I have good news!

I found another way to show the OSD(currently only for opengl driver). It's much better than the other solution,
because I don't need the yuv conversion and the color reduction.

Here is a new screenshot.

As you can see I have a problem with the osd size. It's too small and 2 times visible.

Best regards,
Betacentauri

Wow this is even better !! opengl

let me know when to beta test

[buyukbang]

I've a mac mini with intel HD video card and this is what I just wanted to have !!! If you look my previous post, I said OpenGL is the solution for that, the problem for me is that I had e very limited time for all the December to work on OpenGL. I was planing to try OpenGL implementation over this weekend, I just visited to hear latest progress and see you already did this Thank you for this new year present I believe, in the near future I can completely replace my stb with my mac mini with a usb tuner card. Really appriciated for this !!!

I think this is also can be used under VMware machine ? Please let me now for if you need beta test.

Regards...

I have good news!

I found another way to show the OSD(currently only for opengl driver). It's much better than the other solution,
because I don't need the yuv conversion and the color reduction.

Here is a new screenshot.

As you can see I have a problem with the osd size. It's too small and 2 times visible.

Best regards,
Betacentauri

Edited by buyukbang, 31 December 2011 - 09:54.

[betacentauri]

I don't use a VM. But if you can now see the video without OSD in the VM, then there's a big likelihood that you can also see the OSD.

Please give me a couple of days. I want to understand why the OSD has incorrect size. And I also have added so much debug messages and other (now)
unneeded stuff, so that I want to start from scratch and only take over the needed changes.
Afterwards it would be great if you can beta test it.

Regards

P.S. See you next year

[buyukbang]

@betacentauri,
OK I'm waiting the news excitedly


@nobody9,
I just wonder if we can execute PLiPC from Windows 7 desktop directly without a vmware? I see there are some projects that injects linux on windows, however I've no experience on them:

http://cygwin.com
http://www.andlinux.org
http://www.colinux.org

Do you have any experience with these WinLinux projects? As far as I read from the forum messages, people are able to run CCCam on windows by using this method. Do you think if it is possible to compile and run OpenPLi on these ?

Regards...

Edited by buyukbang, 31 December 2011 - 11:28.

[buyukbang]

I found an andlinux implementation example :

http://lifehacker.co...-inside-windows

[betacentauri]

I found an andlinux implementation example :

http://lifehacker.co...-inside-windows

Cool! Never saw that before. Thanks for the link!
But it seems to be quite slow (see comments below).

Can't you install ubuntu on mac mini?

[buyukbang]

I can install Ubuntu on Mac Mini, I just want to have everything on the same desktop

I found an andlinux implementation example :

http://lifehacker.co...-inside-windows

Cool! Never saw that before. Thanks for the link!
But it seems to be quite slow (see comments below).

Can't you install ubuntu on mac mini?

[buyukbang]

I found another implementation: Pubuntu (portable ubuntu) : http://sourceforge.n.../portableubuntu
I cant believe that this is just a 32 mb file !!! I'll test this now.


Some other interesting links:
CCCam on Pubuntu: http://www.eurocards...-windows-119673
CCcam with DVB-S under Windows : http://www.eurocards...r-windows-64399

Edited by buyukbang, 31 December 2011 - 12:50.

[buyukbang]

Forget it, 32 mb is only the size of Remux extension. Original file is 1,5 Gb as expected.

Edited by buyukbang, 31 December 2011 - 13:16.