2062 replies to this topic

[betacentauri]

Hi,

I am currently rebuilding everything from scratch and I will report if the patch fixes the Xorg problem. Compilation takes time on this PC. :-)

But I point out something else, it seems that the build from libbluray.git doesn't work in the script: build_libs.sh (you seems to select a specific version which is no longer available). Doing all the commands manually from main branch is working.

Another test, I can now run OpenpliPC on my PC with a graphical card that doesn't support libdvpau (Nvidia 6700 XL GPU) by selecting the OSD branch and building it and forcing opengl in xine.conf file. I am really happy to see now the menu of E2 on that PC too.

Pr2

I hope nobody9 is back soon (see his message in openwebif thread), so that he can help a little bit.
I currently working on OSD support for other xine drivers.
So the problem with libbluray has to wait a little bit.

And as said before: Thanks for the tests!

Edited by betacentauri, 11 January 2012 - 21:11.

[Pr2]

Hi,

Thanks you for the patch!!! I applied it manually and compile again E2 and now it is working fine!

So you can apply it in git, it really fix the problem.

Pr2

[betacentauri]

Great news!

I pushed the patch to master branch. For all OSD branch users: Please use patch file. I'm currently developing and I can't apply patch yet in my current version.
It will be done in a few days.

[betacentauri]

Hi,

I added some patches to git:
Master branch:
- Resize didn't work properly if only height or width was changed

OSD branch:
- OSD for XSHM driver!
OSD will be scaled (unfortunatley without hardware acceleration. Is there somebody who is MMX specialist??)

With this E2 should work on virtual machines with OSD.
@Buyukbang: Can you please test?

Regards,
Betacentauri

[rijoma]

hello all

i try to compile but give me always this error

CXX ca_connector.o
ca_connector.cpp: In constructor âcaConnector::caConnector()â:
ca_connector.cpp:16: error: ânl_socket_allocâ was not declared in this scope
ca_connector.cpp:17: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint genl_connect(nl_handle*)â
ca_connector.cpp:19: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint genl_ctrl_resolve(nl_handle*, const char*)â
ca_connector.cpp:36: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint nl_send_auto_complete(nl_handle*, nl_msg*)â
ca_connector.cpp:37: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint nl_socket_modify_cb(nl_handle*, nl_cb_type, nl_cb_kind, int (*)(n l_msg*, void*), void*)â
ca_connector.cpp:38: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint nl_recvmsgs_default(nl_handle*)â
ca_connector.cpp:40: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint nl_socket_modify_cb(nl_handle*, nl_cb_type, nl_cb_kind, int (*)(n l_msg*, void*), void*)â
ca_connector.cpp:41: error: ânl_socket_disable_seq_checkâ was not declared in th is scope
ca_connector.cpp: In destructor âvirtual caConnector::~caConnector()â:
ca_connector.cpp:51: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âvoid nl_close(nl_handle*)â
ca_connector.cpp:52: error: ânl_socket_freeâ was not declared in this scope
ca_connector.cpp: In member function âvirtual void caConnector::thread()â:
ca_connector.cpp:60: error: cannot convert ânl_sock*â to ânl_handle*â for argume nt â1â to âint nl_recvmsgs_default(nl_handle*)â

thanks already for your help

[betacentauri]

@rijoma: Did you execute build_libs.sh?
I think that you need to install this package: libnl2-dev (sudo apt-get install libnl2-dev)

[rijoma]

thanks for the reply

yes i have installed this pakage

[betacentauri]

I'm not really good in this...
Perhaps this helps to find the problem:
1. Go to enigma2/lib/dvb/
2. Edit the Makefile (change AM_DEFAULT_VERBOSITY = 0 to AM_DEFAULT_VERBOSITY = 1)
3. execute "make ca_connector.o"

Now I see the whole g++ command. On my system it looks like this:

> make ca_connector.o
g++ -DHAVE_CONFIG_H -I. -I../..  -I../.. -I../../include -include Python.h -include ../../enigma2_config.h -I/usr/include/python2.7  -g -O2 -ggdb3 -Wall -I/usr/local/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/fribidi -I/usr/include/libxml2 -I/usr/lib/sigc++-1.2/include -I/usr/include/sigc++-1.2   -fno-rtti -fno-exceptions -pthread -MT ca_connector.o -MD -MP -MF .deps/ca_connector.Tpo -c -o ca_connector.o ca_connector.cpp
mv -f .deps/ca_connector.Tpo .deps/ca_connector.Po

Is there any difference to my output?
Do you use ubuntu? Which version?
Can you find the libraries in the system (do "ls /usr/lib/libnl*.so")? Is there also this lib: /usr/lib/libnl-genl.so?

Edited by betacentauri, 14 January 2012 - 18:34.

[rijoma]

g++ -DHAVE_CONFIG_H -I. -I../.. -I../.. -I../../include -include Python.h -include ../../enigma2_config.h -I/usr/include/python2.6 -g -O2 -ggdb3 -Wall -I/usr/include/freetype2 -I/usr/include/fribidi -I/usr/include/libpng12 -I/usr/include/libxml2 -I/usr/lib/sigc++-1.2/include -I/usr/include/sigc++-1.2 -fno-rtti -fno-exceptions -pthread -MT ca_connector.o -MD -MP -MF .deps/ca_connector.Tpo -c -o ca_connector.o ca_connector.cpp
ca_connector.cpp: In constructor ‘caConnector::caConnector()’:
ca_connector.cpp:16: error: ‘nl_socket_alloc’ was not declared in this scope
ca_connector.cpp:17: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int genl_connect(nl_handle*)’
ca_connector.cpp:19: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int genl_ctrl_resolve(nl_handle*, const char*)’
ca_connector.cpp:36: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int nl_send_auto_complete(nl_handle*, nl_msg*)’
ca_connector.cpp:37: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int nl_socket_modify_cb(nl_handle*, nl_cb_type, nl_cb_kind, int (*)(nl_msg*, void*), void*)’
ca_connector.cpp:38: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int nl_recvmsgs_default(nl_handle*)’
ca_connector.cpp:40: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int nl_socket_modify_cb(nl_handle*, nl_cb_type, nl_cb_kind, int (*)(nl_msg*, void*), void*)’
ca_connector.cpp:41: error: ‘nl_socket_disable_seq_check’ was not declared in this scope
ca_connector.cpp: In destructor ‘virtual caConnector::~caConnector()’:
ca_connector.cpp:51: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘void nl_close(nl_handle*)’
ca_connector.cpp:52: error: ‘nl_socket_free’ was not declared in this scope
ca_connector.cpp: In member function ‘virtual void caConnector::thread()’:
ca_connector.cpp:60: error: cannot convert ‘nl_sock*’ to ‘nl_handle*’ for argument ‘1’ to ‘int nl_recvmsgs_default(nl_handle*)’
make: ** [ca_connector.o] Erro 1

and for de lib i havethis one
/usr/lib/libnl.so /usr/lib/libnl.so.1 /usr/lib/libnl.so.1.1

[betacentauri]

If I do this: ls -la /usr/lib/libnl*.so

I get:

$ ls -la /usr/lib/libnl*.so
lrwxrwxrwx 1 root root 18 2011-05-01 23:16 /usr/lib/libnl-cli.so -> libnl-cli.so.2.0.0
lrwxrwxrwx 1 root root 19 2011-05-01 23:16 /usr/lib/libnl-genl.so -> libnl-genl.so.2.0.0
lrwxrwxrwx 1 root root 17 2011-05-01 23:16 /usr/lib/libnl-nf.so -> libnl-nf.so.2.0.0
lrwxrwxrwx 1 root root 20 2011-05-01 23:16 /usr/lib/libnl-route.so -> libnl-route.so.2.0.0
lrwxrwxrwx 1 root root 14 2011-05-01 23:16 /usr/lib/libnl.so -> libnl.so.2.0.0

If you don't get this, please try to install the missing libs.

Edited by betacentauri, 14 January 2012 - 18:56.

[betacentauri]

And please also install libnl2

[rijoma]

i am using ubuntu 10.04 and have only this


i try to apt-get install libnl2 and dont have

ilrwxrwxrwx 1 root root 10 2012-01-14 16:17 /usr/lib/libnl.so -> libnl.so.1
lrwxrwxrwx 1 root root 12 2012-01-14 14:24 /usr/lib/libnl.so.1 -> libnl.so.1

[buyukbang]

@betacentauri,

I tested new OSD branch. Compiled flawlessly. I can confirm OSD with XSHM works !!!! Excellent work. Thanks for your precious efforts.

Regards...

[betacentauri]

i am using ubuntu 10.04 and have only this


i try to apt-get install libnl2 and dont have

ilrwxrwxrwx 1 root root 10 2012-01-14 16:17 /usr/lib/libnl.so -> libnl.so.1
lrwxrwxrwx 1 root root 12 2012-01-14 14:24 /usr/lib/libnl.so.1 -> libnl.so.1

Quite difficult. It seems that libnl2 is not in the normal 10.04 repositories.
Here is a link to a "untrusted" version:
https://launchpad.ne...es_filter=lucid

[rijoma]

ok i have compile but now it crash at start

couldn't save lame channel db

thanks for you help

[betacentauri]

@betacentauri,

I tested new OSD branch. Compiled flawlessly. I can confirm OSD with XSHM works !!!! Excellent work. Thanks for your precious efforts.

Regards...

Thanks!

[Pr2]

@rijoma,

You need to launch enigma with sudo command.

cd /usr/local/e2/bin
sudo ./enigma2

Pr2

[betacentauri]

But I point out something else, it seems that the build from libbluray.git doesn't work in the script: build_libs.sh (you seems to select a specific version which is no longer available). Doing all the commands manually from main branch is working.

The command was totally wrong. "git clone" was missing. I have changed that in git repository.

[betacentauri]

OSD will be scaled (unfortunatley without hardware acceleration. Is there somebody who is MMX specialist??)

Nobody cried here, so I have implemented MMX support for OSD scaling
Never worked with MMX or assembler before. It wasn't so difficult as I thought before...

If CPU supports MMX it will be used. MMX osd scaling is around 50-70% faster than normal scaling on my system.
And the results should be better (better rounding).... but I cannot see a difference.

[buyukbang]

Mate, you and nobody9 made fantastic things in this PLi to PC porting project. Appriciate that (again )

OSD will be scaled (unfortunatley without hardware acceleration. Is there somebody who is MMX specialist??)

Nobody cried here, so I have implemented MMX support for OSD scaling
Never worked with MMX or assembler before. It wasn't so difficult as I thought before...

If CPU supports MMX it will be used. MMX osd scaling is around 50-70% faster than normal scaling on my system.
And the results should be better (better rounding).... but I cannot see a difference.