Jump to content


Photo

Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit

Started by nobody9, 25 Nov 2011 21:37

  • Please log in to reply
2062 replies to this topic

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #501 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 20 February 2012 - 20:49

Hi,

I have the same iissue. I am using XINE-LIB version: 1.2.1hg and not the one from git.

I do not know how to do 1) or 2).

I tried to re-clean and re-install but my openpliPC is always with XINE 1.2.1gh. I am on UBUTNU 11.10.

Thanks
attaros


Hi attaros,

you can try to start synaptic(with sudo). There you can search for "libxine*" and deinstall all installed libxine packages.

If that doesn't work, please do this and post result:
> ls -la /usr/lib/libxine*
> ls -la /usr/lib/xine/plugins/

On my system it looks like this:
$ ls -la /usr/lib/libxine*
-rw-r--r-- 1 root root	 895 2012-02-19 16:48 /usr/lib/libxine-interface.la
-rwxr-xr-x 1 root root	 992 2012-02-19 16:48 /usr/lib/libxine.la
lrwxrwxrwx 1 root root	  16 2012-02-19 16:48 /usr/lib/libxine.so -> libxine.so.2.0.0
lrwxrwxrwx 1 root root	  17 2011-05-27 21:47 /usr/lib/libxine.so.1 -> libxine.so.1.29.0
-rw-r--r-- 1 root root  346316 2011-05-27 21:47 /usr/lib/libxine.so.1.29.0
lrwxrwxrwx 1 root root	  16 2012-02-19 16:48 /usr/lib/libxine.so.2 -> libxine.so.2.0.0
-rwxr-xr-x 1 root root 1499948 2012-02-19 16:48 /usr/lib/libxine.so.2.0.0
$ ls -la /usr/lib/xine/plugins/
insgesamt 32
drwxr-xr-x 4 root root  4096 2011-12-26 19:46 .
drwxr-xr-x 3 root root  4096 2010-03-07 18:35 ..
drwxr-xr-x 3 root root 12288 2012-01-07 00:51 1.29
drwxr-xr-x 4 root root 12288 2012-02-19 16:49 2.0

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #502 attaros

  • Senior Member
  • 52 posts

0
Neutral

Posted 21 February 2012 - 19:01


Hi,

I have the same iissue. I am using XINE-LIB version: 1.2.1hg and not the one from git.

I do not know how to do 1) or 2).

I tried to re-clean and re-install but my openpliPC is always with XINE 1.2.1gh. I am on UBUTNU 11.10.

Thanks
attaros


Hi attaros,

you can try to start synaptic(with sudo). There you can search for "libxine*" and deinstall all installed libxine packages.

If that doesn't work, please do this and post result:
> ls -la /usr/lib/libxine*
> ls -la /usr/lib/xine/plugins/

On my system it looks like this:
$ ls -la /usr/lib/libxine*
-rw-r--r-- 1 root root	 895 2012-02-19 16:48 /usr/lib/libxine-interface.la
-rwxr-xr-x 1 root root	 992 2012-02-19 16:48 /usr/lib/libxine.la
lrwxrwxrwx 1 root root	  16 2012-02-19 16:48 /usr/lib/libxine.so -> libxine.so.2.0.0
lrwxrwxrwx 1 root root	  17 2011-05-27 21:47 /usr/lib/libxine.so.1 -> libxine.so.1.29.0
-rw-r--r-- 1 root root  346316 2011-05-27 21:47 /usr/lib/libxine.so.1.29.0
lrwxrwxrwx 1 root root	  16 2012-02-19 16:48 /usr/lib/libxine.so.2 -> libxine.so.2.0.0
-rwxr-xr-x 1 root root 1499948 2012-02-19 16:48 /usr/lib/libxine.so.2.0.0
$ ls -la /usr/lib/xine/plugins/
insgesamt 32
drwxr-xr-x 4 root root  4096 2011-12-26 19:46 .
drwxr-xr-x 3 root root  4096 2010-03-07 18:35 ..
drwxr-xr-x 3 root root 12288 2012-01-07 00:51 1.29
drwxr-xr-x 4 root root 12288 2012-02-19 16:49 2.0

Regards,
Betacentauri


Thanks, i found my problem.

I had: /usr/lib/libxine.so.2 -> libxine.so.2.1.0 and also /usr/lib/libxine.so.2.1.0. I manually remove them and re-created /usr/lib/libxine.so.2 -> libxine.so.2.0.0. ( i tried once to install xine-lib from vdr git and from that moment i was not able to go back to an older version of xine-lib).

That solve all my issues. Thanks a lot !
attaros

Edited by attaros, 21 February 2012 - 19:02.

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #503 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 21 February 2012 - 20:25

You're welcome!

And thanks for the explanation how you fixed the problem.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #504 jtsat

  • Member
  • 18 posts

0
Neutral

Posted 21 February 2012 - 20:27

Following the hints, tips, do's and don'ts in this thread, I now have openpliPC running fine on my Ubuntu 11.10 32-bits installation.
I have a Teevi s470 pci card and use the openGL driver. FTA channels, even HD, show nicely.
Next, I want Oscam active, to view non-FTA channels.

I have a Dreambox dm800HD-se where cccam is running with a CanalDigitaal Seca card.
I have installed Oscam 1.20 build 6434 on Ubuntu. I also added module dvbsoftwareca.ko to the kernel.
In the Oscam logfile, I notice that Oscam connects to cccam but fails to open-up a scrambled channel.
Here is the oscam logfile:

2012/02/21 19:39:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6434 (i686-pc-linux)
2012/02/21 19:39:58 0 s version=1.20-unstable_svn, build #6434, system=i686-pc-linux, nice=-1
2012/02/21 19:39:58 0 s client max. idle=120 sec, debug level=134
2012/02/21 19:39:58 0 s max. logsize=unlimited, loghistorysize=4096 bytes
2012/02/21 19:39:58 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/21 19:39:58 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2012/02/21 19:39:58 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/02/21 19:39:58 0 s signal handling initialized (type=sysv)
2012/02/21 19:39:58 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/02/21 19:39:58 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/02/21 19:39:58 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/02/21 19:39:58 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/02/21 19:39:58 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
2012/02/21 19:39:58 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
2012/02/21 19:39:58 0 s Starting listener 0
2012/02/21 19:39:58 0 s monitor: disabled
2012/02/21 19:39:58 0 s Starting listener 0
2012/02/21 19:39:58 0 s csp: disabled
2012/02/21 19:39:58 0 s starting thread http
2012/02/21 19:39:58 0 s http thread started
2012/02/21 19:39:58 0 s starting thread reader check
2012/02/21 19:39:58 0 s reader check thread started
2012/02/21 19:39:58 0 s starting thread check
2012/02/21 19:39:58 0 s check thread started
2012/02/21 19:39:58 8246258 h HTTP Server listening on port 8888
2012/02/21 19:39:58 0 s creating thread for device dm800
2012/02/21 19:39:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/21 19:39:58 8247A68 p cccam: timeout set to: 30
2012/02/21 19:39:58 0 s anti cascading disabled
2012/02/21 19:39:58 8247A68 p proxy reader: dm800 (dm800:12000) cccam v2.2.1 build 3316, maxhop: 10
2012/02/21 19:39:58 B73005F0 c plain dvbapi-client granted (anonymous, au=off)
2012/02/21 19:39:58 B73005F0 c dvbapi: can't open priority file /usr/local/etc/oscam.dvbapi
2012/02/21 19:39:58 B73005F0 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 10
2012/02/21 19:39:58 8247A68 p dm800: resolved ip=192.168.2.11
2012/02/21 19:39:58 8247A68 p connecting to dm800 on dm800:12000
2012/02/21 19:39:58 8247A68 p socket open for cccam fd=7
2012/02/21 19:39:58 B73005F0 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2012/02/21 19:39:58 8247A68 p connect succesfull cccam fd=7
2012/02/21 19:39:58 8247A68 p cccam® dm800: login succeeded
2012/02/21 19:39:58 8247A68 p cccam: last_s=0, last_g=0
2012/02/21 19:39:58 8247A68 p cccam: pfd=7
2012/02/21 19:39:58 8247A68 p cccam: send client data
2012/02/21 19:39:58 8247A68 p cccam® dm800: sending own version: 2.2.1, build: 3316
2012/02/21 19:39:58 8247A68 p proxy dm800 initialized (server=dm800:12000)
2012/02/21 19:39:58 8247A68 p cccam® dm800: parse_msg=0
2012/02/21 19:39:58 8247A68 p cccam® dm800: parse_msg=8
2012/02/21 19:39:58 8247A68 p cccam® dm800: MSG_SRV_DATA (payload=72, hex=48)
2012/02/21 19:39:58 8247A68 p cccam® dm800: remove server 2F9485B6537A33FC running v2.2.1 (3316)
2012/02/21 19:39:58 8247A68 p cccam® dm800: MSG_SRV_DATA MODE=PLAIN, len=72
2012/02/21 19:39:58 8247A68 p cccam® dm800: parse_msg=7
2012/02/21 19:40:57 B73005F0 c dvbapi: new socket connection fd: 12
2012/02/21 19:40:57 B73005F0 c capmt:
2012/02/21 19:40:57 B73005F0 03 0F AB 3B 00 34 01 81 08 00 C0 00 00 04 51 00
2012/02/21 19:40:57 B73005F0 35 82 02 01 00 84 02 08 3F 09 04 06 22 E5 67 09
2012/02/21 19:40:57 B73005F0 07 18 17 E7 0B 02 00 6A 09 07 18 18 E7 1F 02 00
2012/02/21 19:40:57 B73005F0 6C 09 07 18 19 E7 33 02 00 6D 02 02 05 00 6F 01
2012/02/21 19:40:57 B73005F0 09 11 01 00 E6 43 00 6A FF 00 00 00 00 00 00 02
2012/02/21 19:40:57 B73005F0 14 2C 55 09 11 01 00 E7 0B 00 6A FF FF E0 00 00
2012/02/21 19:40:57 B73005F0 00 00 00 00 2C 55 09 11 01 00 E7 1F 00 6C FF FF
2012/02/21 19:40:57 B73005F0 E0 00 00 00 00 00 00 2C 55 09 11 01 00 E7 33 00
2012/02/21 19:40:57 B73005F0 6D FF FF E0 00 00 00 00 00 00 2C 55 09 0F 05 00
2012/02/21 19:40:57 B73005F0 E5 7B 10 01 00 13 01 20 14 03 04 25 00 09 0F 05
2012/02/21 19:40:57 B73005F0 00 E5 8F 10 01 00 13 01 20 14 03 04 25 00 04 00
2012/02/21 19:40:57 B73005F0 58 00 6F 01 09 11 01 00 E6 43 00 6A FF 00 00 00
2012/02/21 19:40:57 B73005F0 00 00 00 02 14 2C 55 09 11 01 00 E7 0B 00 6A FF
2012/02/21 19:40:57 B73005F0 FF E0 00 00 00 00 00 00 2C 55 09 11 01 00 E7 1F
2012/02/21 19:40:57 B73005F0 00 6C FF FF E0 00 00 00 00 00 00 2C 55 09 11 01
2012/02/21 19:40:57 B73005F0 00 E7 33 00 6D FF FF E0 00 00 00 00 00 00 2C 55
2012/02/21 19:40:57 B73005F0 09 0F 05 00 E5 7B 10 01 00 13 01 20 14 03 04 25
2012/02/21 19:40:57 B73005F0 00 09 0F 05 00 E5 8F 10 01 00 13 01 20 14 03 04
2012/02/21 19:40:57 B73005F0 25 00 06 00 22 00 00 05 00 32 00 00 C0 00 D0 00
2012/02/21 19:40:57 B73005F0 00 C1 00 FA 00 00
2012/02/21 19:40:57 B73005F0 c dvbapi: id: 0 demux_index: 0 ca_mask: 01 program_info_length: 52 ca_pmt_list_management 03
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 81 length: 8
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 82 length: 2
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 84 length: 2
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 4
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 0] CAID: 0622 ECM_PID: 0567 PROVID: 000000
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 7
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 1] CAID: 1817 ECM_PID: 070B PROVID: 00006A
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 7
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 2] CAID: 1818 ECM_PID: 071F PROVID: 00006C
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 7
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 3] CAID: 1819 ECM_PID: 0733 PROVID: 00006D
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: 02 pid: 0205 length: 111
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 4] CAID: 0100 ECM_PID: 0643 PROVID: 00006A
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 5] CAID: 0100 ECM_PID: 070B PROVID: 00006A
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 6] CAID: 0100 ECM_PID: 071F PROVID: 00006C
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 7] CAID: 0100 ECM_PID: 0733 PROVID: 00006D
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 15
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 8] CAID: 0500 ECM_PID: 057B PROVID: 042500
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 15
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD PID 9] CAID: 0500 ECM_PID: 058F PROVID: 042500
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: 04 pid: 0058 length: 111
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 4] CAID: 0100 ECM_PID: 0643 PROVID: 00006A
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 5] CAID: 0100 ECM_PID: 070B PROVID: 00006A
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 6] CAID: 0100 ECM_PID: 071F PROVID: 00006C
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 17
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 7] CAID: 0100 ECM_PID: 0733 PROVID: 00006D
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 15
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 8] CAID: 0500 ECM_PID: 057B PROVID: 042500
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] type: 09 length: 15
2012/02/21 19:40:57 B73005F0 c dvbapi: [ADD STREAM 9] CAID: 0500 ECM_PID: 058F PROVID: 042500
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: 06 pid: 0022 length: 0
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: 05 pid: 0032 length: 0
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: c0 pid: 00d0 length: 0
2012/02/21 19:40:57 B73005F0 c dvbapi: [pmt] stream_type: c1 pid: 00fa length: 0
2012/02/21 19:40:57 B73005F0 c dvbapi: Found 10 ECMpids and 6 STREAMpids in PMT
2012/02/21 19:40:57 B73005F0 c dvbapi: new program number: 0FAB (0622:0FAB unknown)
2012/02/21 19:40:57 B73005F0 c dvbapi: [TRY PID 0] CAID: 0622 PROVID: 000000 CA_PID: 0567
2012/02/21 19:40:57 B73005F0 c dvbapi: set filter pid: 0567
2012/02/21 19:40:57 B73005F0 c dvbapi: DEVICE open (/dev/dvb/adapter0/demux0) fd 13
2012/02/21 19:40:57 B73005F0 c dvbapi: Found 4 IRDETO ECM CHIDs
2012/02/21 19:40:58 B73005F0 c dvbapi: request cw for caid 0622 provid 000000 srvid 0FAB pid 0567 chid 0002
2012/02/21 19:40:58 B73005F0 c dvbapi: trying irdeto chid index: 1
2012/02/21 19:40:58 B73005F0 c anonymous (0622&000000/0FAB/34:D970): rejected group (0 ms) (0 of 0) (no matching reader)
2012/02/21 19:40:58 B73005F0 c cw:
2012/02/21 19:40:58 B73005F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2012/02/21 19:40:58 B73005F0 c dvbapi: request cw for caid 0622 provid 000000 srvid 0FAB pid 0567 chid 0014
2012/02/21 19:40:58 B73005F0 c dvbapi: trying irdeto chid index: 2
2012/02/21 19:40:58 B73005F0 c anonymous (0622&000000/0FAB/34:D866): rejected group (0 ms) (0 of 0) (no matching reader)
2012/02/21 19:40:58 B73005F0 c cw:
2012/02/21 19:40:58 B73005F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2012/02/21 19:40:58 B73005F0 c dvbapi: request cw for caid 0622 provid 000000 srvid 0FAB pid 0567 chid 0004
2012/02/21 19:40:58 B73005F0 c dvbapi: trying irdeto chid index: 3
2012/02/21 19:40:58 B73005F0 c anonymous (0622&000000/0FAB/34:DB76): rejected group (0 ms) (0 of 0) (no matching reader)
here are my Oscam config files, first oscam.conf:

[global]
nice = -1
WaitForCards = 0
logfile = /var/log/oscam.log
maxlogsize = 0

[monitor]
port = 0
aulow = 120
monlevel = 0

[dvbapi]
enabled = 1
boxtype = pc
user = openpliPC

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

then, oscam.server:

[reader]
label = dm800
protocol = cccam
enable = 1
device = dm800,12000
user = ct-optimal
password = ct-optimal
group = 1,2
cccversion = 2.2.1
ccckeepalive = 1

and oscam.user:

[account]
user = ubu1
pwd = ubu1
uniq = 0
group = 1
au = 1
What can I do to open-up the scramled channels?
Thanks in advance for your expert help!

John

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #505 kerven

  • Senior Member
  • 52 posts

+1
Neutral

Posted 21 February 2012 - 22:11

hello

look here : http://streamboard.g...1914#comment:20

Resolution set to fixed

Sending the ecms by dvbapi can be prevented by configuring oscam.dvbapi.
E.G. for Canal Digitaal NL:
I: 0100
I: 0500:042500
I: 0622
M: 1817:00006A 0100:00006A
P: 1817:00006A

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #506 dream7

  • Member
  • 3 posts

0
Neutral

Posted 22 February 2012 - 00:37

the true command is ls /dev/dvb/adapter0

thanks all for performance

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #507 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 22 February 2012 - 11:04

@jtsat,

In order to have dvbapi working you need to create a file oscam.dvbapi this is mandatory.
You also need to create the openpliPC user in the oscam.users file and assign it to group=1
[account]
user = openpliPC
group = 1
au = 1
Pr2

Edited by Pr2, 22 February 2012 - 11:04.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #508 jtsat

  • Member
  • 18 posts

0
Neutral

Posted 22 February 2012 - 21:07

@kerven, @Pr2: thanks for pointing out the oscam.dvbapi bypass. I applied your suggestions, but still no picture.

Oscam is a complete new subject to me, so I need expert help!

Attached, the oscam.log file from the moment I tried to switch to Nederland-1.

Who can point me into the correct direction?

Thanks again!

John

Attached Files


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #509 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 22 February 2012 - 21:16

Hi,

Please create a specific topic or go to an OScam forum.
This thread is not for OScam debugging and please apply the change I ask you to perform in your oscam.users too.

Pr2

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #510 attaros

  • Senior Member
  • 52 posts

0
Neutral

Posted 22 February 2012 - 21:23

Hi,

I am using the osd branch with vdpau. I was trying to configure xine to use temporal_spatial for HD/SD deinterlacing.

I have edited: /usr/local/e2/share/enigma2/xine.conf

and changed :

video.output.vdpau_hd_deinterlace_method:4 (temporal_spatial)
video.output.vdpau_sd_deinterlace_method:4 (temporal_spatial)

But when i start enigma2 i see in the log:

vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=1
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=1 studio_levels=1
vo_vdpau: skip_chroma = 0
vo_vdpau: background_color = 0

It's like changes made to xine.conf are not being reflected.

What am i doing wrong ?

Thanks
attaros

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #511 attaros

  • Senior Member
  • 52 posts

0
Neutral

Posted 22 February 2012 - 22:41

Hi,

I am using the osd branch with vdpau. I was trying to configure xine to use temporal_spatial for HD/SD deinterlacing.

I have edited: /usr/local/e2/share/enigma2/xine.conf

and changed :

video.output.vdpau_hd_deinterlace_method:4 (temporal_spatial)
video.output.vdpau_sd_deinterlace_method:4 (temporal_spatial)

But when i start enigma2 i see in the log:

vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=1
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=1 studio_levels=1
vo_vdpau: skip_chroma = 0
vo_vdpau: background_color = 0

It's like changes made to xine.conf are not being reflected.

What am i doing wrong ?

Thanks
attaros


I solved this by myself, re-reading the posts.
I had to change this not in xine.conf as they are set in A/V Settings in Enigma2 directly.

Some values are kept there and others (which should not be touched frequently) have to be changed in xine.conf directly.

Bye
attaros

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #512 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 23 February 2012 - 21:10

Hi casacristo,

new patch is available for you and all others who don't have a windowmanager running. Patch is currently only available in OSD branch.
To set a fix resolution please add 2 lines to /usr/local/e2/etc/enigma2/settings file. E.g. for 1280x1024:
config.pc.initial_window_width=1280
config.pc.initial_window_height=1024

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #513 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 25 February 2012 - 15:57

New patch is available in git which should solve the problem with MPEG4 SD (see post 447). It's currently only in master branch.

Thanks to Raider05 for development and testing!

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #514 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 25 February 2012 - 16:28

Hi all,

I have merged osd branch into master branch. So osd branch isn't any longer necessary for non nvidia users.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #515 Amatøren

  • Senior Member
  • 147 posts

0
Neutral

Posted 25 February 2012 - 20:37

I had: /usr/lib/libxine.so.2 -> libxine.so.2.1.0 and also /usr/lib/libxine.so.2.1.0. I manually remove them and re-created /usr/lib/libxine.so.2 -> libxine.so.2.0.0. ( i tried once to install xine-lib from vdr git and from that moment i was not able to go back to an older version of xine-lib).

I had the same problem. THANKS TO ALL!!!

Now it starts up - Great, but new problem.....

Says in setup only TUNER A: VTUNER (DVB-S2)

I have a DVB-T tuner that Ubuntu see and Kaffeine see (have picture but no sound) but OpenPLi dont see it.
Any chance to get it working?

Best regard

Amatøren

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #516 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 25 February 2012 - 20:48

Hi Amatoren,

I think that you need to change this file:
/usr/local/e2/etc/tuxbox/nim_sockets

But I don't know exactly what you need to change. Try to change DVB-S2 to DVB-T and the name to the name you see in dmesg output.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #517 Amatøren

  • Senior Member
  • 147 posts

0
Neutral

Posted 25 February 2012 - 22:07

dmesg:

[ 5453.104466] usb 2-6: USB disconnect, device number 3
[ 5457.956145] usb 2-5: new high speed USB device number 4 using ehci_hcd


Like this?

NIM Socket 0:
Type: DVB-T
Name: ehci_hcd
Has_Outputs: no
Frontend_Device: 0


But gives:

ERROR - failed to scan (error starting scanning)!


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #518 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 25 February 2012 - 22:50

Hi,

Check on which: /dev/dvb/adaptatorX is your DVB-T on your system.

Then you need to edit the file: /usr/local/e2/etc/tuxbox/nim_sockets.


Let say that on your system /dev/dvb/adaptator0 is vtuner and /dev/dvb/adaptator1 is your DVB-T simply create this:
NIM Socket 0:
		Type: DVB-S2
		Name: The Virtual Tuner
		Has_Outputs: no
		Frontend_Device: 0
 
NIM Socket 1:
		Type: DVB-T
		Name: My DVB-T Tuner
		Has_Outputs: no
		Frontend_Device: 0

Pr2

Edited by Pr2, 25 February 2012 - 22:51.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #519 Amatøren

  • Senior Member
  • 147 posts

0
Neutral

Posted 26 February 2012 - 13:31

Found the problem, but don't find out how to fix it yet.

After an Ubuntu update, Ubuntu don't see my USB DVB tuner anymore.... :angry:

Edited by Amatøren, 26 February 2012 - 13:32.

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #520 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 26 February 2012 - 18:26

Hi,

Do you install?

sudo apt-get install linux-firmware  linux-firmware-nonfree

Pr2

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Back to [EN] Third-Party Development

17 user(s) are reading this topic

0 members, 17 guests, 0 anonymous users

  1. Forums
  2. → PLi® Development
  3. → [EN] Third-Party Development