2062 replies to this topic

[frend]

Hi
My lnstall openpliPC/enigma2 works.
Please help.
The enigma2 works but unfortunately there is no sign of the start-up ''Tune failed'' error.
Tuner skystar HD2, ubuntu11.04
Thanks for the help is

[Pr2]

Hi,

Press space bar and go into the setup menu and configure your tuner/DiseqC settings, and if you can for a quicker startup install an existing Enigma2 channel list settings.

Pr2

[frend]

Unfortunately
message ''Tune failed''
and no signal

A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Edited by frend, 26 February 2012 - 23:13.

[betacentauri]

Do your card work with other programs (like Kaffeine)?
Is the card recognized by Ubuntu (in dmesg output)?
I googled a little bit. It seems that you need either v4l-dvb-dkms or s2-liplianin-dkms driver.

Betacentauri

[Pr2]

Hi,

As stated you need to go into the Setup and configure it according to your setup.

Space bar - use arrow - choose: Setup - press Enter
Service Searching- Enter
Tuner Configuration - Enter
Tuner A - Vtuner - Enter

And there use left/right up/down arrow to select and change the different values to reflect your setup.

Your screenshot shows that DiseqC setting is not correct (because you have an error) so it is normal that you get Tuned Failed on screen.

Pr2

[betacentauri]

Hi,

I have merged new xine-lib version 1.2.1 into new branch xine_1_2_1. With opengl and xshm driver I have no problems. Can anybody with nvidia card please test whether vdpau driver also works?
There were several patches for vdpau driver.
E.g.[list]
[*]vdpau: Consider displayed window coordinates when scaling osd overlay objects
[*]Fixed overlay surface reuse issue for raw rgba overlays within vdpau output driver.
[/list]
For details see http://projects.vdr-...t/xine-lib.git/

Regards,
Betacentauri

[Pr2]

Hi,

I have just done a quick test of the vdpau mode with the new xine_1_2_1 branch and it seems to work.
Of course I still have random unscrambling of crypted channels in vdpau mode but that's another story, I guess that other people using vdpau have the same problem.

Pr2

[frend]

Thank you very much for the answer
works openpliPC the FTA channels

[MrCoolSpan]

Can't get it to work
I have install a fresh ubuntu 11.10 desktop x64, and i update the system
the i use git clone git://github.com/nobody9/openpliPC.git
and did step 1, 2, 3
everything compiled and install whit no errors.

the problem is when i do
sudo /usr/local/e2/bin/enigma2

openPli start up and the shouts down ???

PYTHONPATH: /usr/local/e2/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) gLCDDC
lcd buffer 0xa6ce70 8448 bytes, stride 132
+ (9) gXlibDC
Display resolution 1920 1080
XINE-LIB version: 1.2.0openpliPC-e2
configfile /usr/local/e2/share/enigma2/xine.conf
use vo_driver: auto
use ao_driver: auto
vo_vdpau: Use lock display synchronization for some vdpau calls
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library 295.20 Mon Feb 6 21:33:24 PST 2012
vo_vdpau: maximum video surface size for chroma type 4:2:2 is 4096x4096
vo_vdpau: maximum video surface size for chroma type 4:2:0 is 4096x4096
vo_vdpau: maximum output surface size is 8192x8192
vo_vdpau: using 3 output surfaces for display queue
vo_vdpau: this hardware doesn't support mpeg4-part2.
xine: found input plugin : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=1
vo_vdpau: skip_chroma = 0
vo_vdpau: background_color = 0
setResolution 720 576
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) AVSwitch Driver
+ (20) misc options
+ (20) RC Input layer
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) DVB-CI UI
+ (21) Xlib RC Driver
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (34) caConnector
Cannot resolve family name of generic netlink socket
+ (35) CA handler
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryM2TS
eServiceFactoryM2TS aborted, no /usr/lib/libpassthrough.so
+ (41) eServiceFactoryDVD
reached rl 70
---- opening lame channel db
reading services (version 4)
XINE_EVENT_UI_PLAYBACK_FINISHED
Event Received!
XNextEvent 21
XNextEvent 22
XNextEvent 22
XNextEvent 22
XNextEvent 19
XNextEvent 12
XNextEvent 22
loaded 1524 services
scanning for frontends..
opening frontend 0
Event Received!
Event Received!
main thread is non-idle! display spinner!
no spinner DC!
detected satellite frontend
close frontend 0
opening frontend 1
main thread is non-idle! display spinner!
no spinner DC!
main thread is non-idle! display spinner!
no spinner DC!
detected terrestrial frontend
close frontend 1
boxtype detection via /usr/local/e2/etc/stb/info not possible... use fallback via demux count!

found 1 adapter, 2 frontends(2 sim) and 2 demux, boxtype 6
Use valid Linux Time (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!

adapter0/demux0: reset stateadapter0/demux1: reset stateexecuting main
setIoPrio best-effort level 3 ok
/usr/local/e2/etc/stb/frontend/0/lnb_sense is 0

SKIN ERROR: {Magic/skin.xml}: primary skin not found. Please contact the skin's author!
defaulting to standard skin... skin.xml
Reading satellites.xml
MATRIX
LNB
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr VTUNER, need rotorworkaround No, enabled Yes, DVB-S2 Yes
Traceback (most recent call last):
File "/usr/local/e2/lib/enigma2/python/mytest.py", line 18, in <module>
from Screens import InfoBar
File "/usr/local/e2/lib/enigma2/python/Screens/InfoBar.py", line 4, in <module>
import Screens.MovieSelection
File "/usr/local/e2/lib/enigma2/python/Screens/MovieSelection.py", line 28, in <module>
import RecordTimer
File "/usr/local/e2/lib/enigma2/python/RecordTimer.py", line 5, in <module>
from Components.UsageConfig import defaultMoviePath
File "/usr/local/e2/lib/enigma2/python/Components/UsageConfig.py", line 6, in <module>
from Components.NimManager import nimmanager
File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 1510, in <module>
nimmanager = NimManager()
File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 791, in __init__
InitNimManager(self) #init config stuff
File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 1508, in InitNimManager
nimmgr.sec = SecConfigure(nimmgr)
File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 475, in __init__
self.update()
File "/usr/local/e2/lib/enigma2/python/Components/NimManager.py", line 147, in update
eDVBResourceManager.getInstance().setFrontendSlotInformations(used_nim_slots)
StandardError: eDVBResourceManager::setFrontendSlotInformations .. assigned 2 socket informations, but 1 registered frontends!
FLUSH
---- saving lame channel db
saved 88 channels and 1524 services!
Event Received!
release cached channel (timer timeout)
set RTC to previous valid time
- (41) eServiceFactoryDVB
- (41) eServiceFactoryFS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryDVD
- (40) eServiceCenter
clear instance
- (36) Stream server
- (35) CA handler
- (35) CI Slots
- (34) caConnector
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) Xlib RC Driver
- (20) AVSwitch Driver
- (20) misc options
- (20) RC Input layer
- (20) UHF Modulator
- (20) DVB-CI UI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) Font Render Class
- (9) gLCDDC
- (9) gXlibDC
thread joined 0
xine_event_handler(): event->type: 7
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1

[Pr2]

Hi,

Not all NVidia cards are vdpau compliant, please check that your Nvidia card is vdpau compliant.
The test for vdpau doesn't take this into consideration and assume that all Nvidia card are vdpau compliant which is not true. Old ones are not.

Otherwhise change the /usr/local/e2/share/enigma2/xine.conf

Parameter video.driver and test either opengl or xshm

Pr2

[MrCoolSpan]

Hi,

Not all NVidia cards are vdpau compliant, please check that your Nvidia card is vdpau compliant.
The test for vdpau doesn't take this into consideration and assume that all Nvidia card are vdpau compliant which is not true. Old ones are not.

Otherwhise change the /usr/local/e2/share/enigma2/xine.conf

Parameter video.driver and test either opengl or xshm

Pr2

lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
and it works fine whit vdr

[MrCoolSpan]

Hi,

Not all NVidia cards are vdpau compliant, please check that your Nvidia card is vdpau compliant.
The test for vdpau doesn't take this into consideration and assume that all Nvidia card are vdpau compliant which is not true. Old ones are not.

Otherwhise change the /usr/local/e2/share/enigma2/xine.conf

Parameter video.driver and test either opengl or xshm

Pr2

lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
and it works fine whit vdr

same thing happen whit opengl and xshm

[MrCoolSpan]

Hi,

Not all NVidia cards are vdpau compliant, please check that your Nvidia card is vdpau compliant.
The test for vdpau doesn't take this into consideration and assume that all Nvidia card are vdpau compliant which is not true. Old ones are not.

Otherwhise change the /usr/local/e2/share/enigma2/xine.conf

Parameter video.driver and test either opengl or xshm

Pr2

lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
and it works fine whit vdr

same thing happen whit opengl and xshm

qvdpautest 0.5.1
AMD Athlon™ Dual Core Processor 4850e
NVIDIA GPU GeForce 8400 GS (G98) at PCI:2:0:0 (GPU-0)
VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library 295.20 Mon Feb 6 21:33:24 PST 2012
SURFACE GET BITS: 843.845 M/s
SURFACE PUT BITS: 876.535 M/s
MPEG DECODING (1920x1080): 61 frames/s
MPEG DECODING (1280x720): 138 frames/s
H264 DECODING (1920x1080): 55 frames/s
H264 DECODING (1280x720): 112 frames/s
VC1 DECODING (1440x1080): 70 frames/s
MIXER WEAVE (1920x1080): 228 frames/s
MIXER BOB (1920x1080): 336 fields/s
MIXER TEMPORAL (1920x1080): 78 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 50 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 109 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 25 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 19 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 28 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 96 fields/s
MULTITHREADED MPEG DECODING (1920x1080): 55 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 66 fields/s

[betacentauri]

Hi MrCoolSpan,

the problem is this:

detected satellite frontend
close frontend 0
opening frontend 1
main thread is non-idle! display spinner!
no spinner DC!
main thread is non-idle! display spinner!
no spinner DC!
detected terrestrial frontend
close frontend 1
boxtype detection via /usr/local/e2/etc/stb/info not possible... use fallback via demux count!

found 1 adapter, 2 frontends(2 sim) and 2 demux, boxtype 6
eDVBResourceManager.getInstance().setFrontendSlotInformations(used_nim_slots)
StandardError: eDVBResourceManager::setFrontendSlotInformations .. assigned 2 socket informations, but 1 registered frontends!
FLUSH

You have 2 frontends and with 1 of them there's a problem. Here(only with vtuner) it looks like this:

$ ls -al /dev/dvb/adapter0/
insgesamt 0
drwxr-xr-x  2 root root	 100 2012-02-28 18:47 .
drwxr-xr-x  3 root root	  60 2012-02-28 18:46 ..
crw-rw-rw-+ 1 root video 212, 0 2012-02-28 18:46 demux0
crw-rw-rw-+ 1 root video 212, 1 2012-02-28 18:46 dvr0
crw-rw-rw-+ 1 root video 212, 2 2012-02-28 18:47 frontend0

Is output "detected terrestrial frontend" correct that you have attached a DVB-T card/stick? Can you pull it out of usb-port or deactivate it?
Does E2 work afterwards?

And please check nim_sockets file. Add a second entry when using vtuner and DVB-T Card/stick.

Regards,
Betacentauri

Edited by betacentauri, 28 February 2012 - 18:54.

[MrCoolSpan]

man this is my last aloud post for to day.

my dvb card is a Hauppauge hvr-4000 pci card
this card have dvb-t and dvb-s2

the ls -al /dev/dvb/adapter0/ give my this

totalt 0
drwxr-xr-x 2 root root 200 2012-02-28 16:10 .
drwxr-xr-x 3 root root 60 2012-02-28 16:10 ..
crw-rw----+ 1 root video 212, 1 2012-02-28 16:10 demux0
crw-rw----+ 1 root video 212, 5 2012-02-28 16:10 demux1
crw-rw----+ 1 root video 212, 2 2012-02-28 16:10 dvr0
crw-rw----+ 1 root video 212, 6 2012-02-28 16:10 dvr1
crw-rw----+ 1 root video 212, 0 2012-02-28 16:10 frontend0
crw-rw----+ 1 root video 212, 4 2012-02-28 16:10 frontend1
crw-rw----+ 1 root video 212, 3 2012-02-28 16:10 net0
crw-rw----+ 1 root video 212, 7 2012-02-28 16:10 net1

I realy hoping to get his to work, just like my dreambox 800 (no clone) whit openPli..

[Pr2]

Hi,

You simply need to edit /usr/local/e2/etc/tuxbox/nim_sockets to reflect your setup:

Exemple

NIM Socket 0:
  Type: DVB-T
  Name: Hauppage-DVB-T
  Has_Outputs: no
  Frontend_Device: 0
 
NIM Socket 0:
 Type:DVB-S2 (or DVB-S if your card is not DVB-S2 compiant)
 Name:Hauppage-DVB-S
 Has_Outputs: no
 Frontend_Device: 1

Pr2

Edited by Pr2, 28 February 2012 - 20:56.

[MrCoolSpan]

Hi,

You simply need to edit /usr/local/e2/etc/tuxbox/nim_sockets to reflect your setup:

Exemple

NIM Socket 0:
  Type: DVB-T
  Name: Hauppage-DVB-T
  Has_Outputs: no
  Frontend_Device: 0
 
NIM Socket 0:
Type:DVB-S2 (or DVB-S if your card is not DVB-S2 compiant)
Name:Hauppage-DVB-S
Has_Outputs: no
Frontend_Device: 1

Pr2

Thanx for all the help
I found on another forum the answer, the same time, you post yous
I have it up and running, and added the New Openpli hd skin and a new sattelite.xml
having some problems whit scanning, engma2 freeze, have to play a little more whit it..

[attaros]

Hi,

You simply need to edit /usr/local/e2/etc/tuxbox/nim_sockets to reflect your setup:

Exemple

NIM Socket 0:
  Type: DVB-T
  Name: Hauppage-DVB-T
  Has_Outputs: no
  Frontend_Device: 0
 
NIM Socket 0:
Type:DVB-S2 (or DVB-S if your card is not DVB-S2 compiant)
Name:Hauppage-DVB-S
Has_Outputs: no
Frontend_Device: 1

Pr2

Thanx for all the help
I found on another forum the answer, the same time, you post yous
I have it up and running, and added the New Openpli hd skin and a new sattelite.xml
having some problems whit scanning, engma2 freeze, have to play a little more whit it..

Hi,

If you have tunning problems on ubuntu 11.10 using a DVB-S2 card then try drivers at: http://git.linuxtv.org/media_build.git

I have a S2-3200 (but it's the same for any dvb card with stb0899 as skystart HD2 and others) and the default driver
was finding only 450 channels on hotbird+astra (13E+19E) and a lot of tune failed. With the media_build drivers, i find more than 3400 channels
on hotbird+astra (13E+19E) which is more correct.

I had to apply myself a patch to correct the SNR signal as it was always showing 0.
The channel switching is way slow (7-8 seconds switching on different transponders, 5 on the same) nothing to do with that.
Probably i need a new dvb-s2 card to improve that.

Bye
attaros

[MrCoolSpan]

okay heir we go again
now how do i enable my remote control?

i have a working setup for vdr using lirc

this is my /etc/lirc/hardware.conf

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Linux input layer (/dev/input/eventX)"
REMOTE_MODULES="ir-kbd-i2c lirc_dev"
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/input/event`grep -A4 'Name="cx88 IR (Hauppauge WinTV-HVR400"' /proc/bus/input/devices | grep "Handlers=" | sed 's/.*kbd event\([0-9]\+\)/\1/'`"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="devinput/lircd.conf.devinput"
REMOTE_LIRCD_ARGS=""
START_LIRCD="true"
START_LIRCMD=""
LOAD_MODULES=""
LIRCMD_CONF=""
FORCE_NONINTERACTIVE_RECONFIGURATION="false"

some of the bottoms work in openpli2pc like channel up and down but etc ok not working?

[frend]

Please help to config dvbapi.oscam
Actual config:


"P: 1802:002011, 002111,002113 # prioritise CAID 0100 with provider 123456

#P: :1234 # prioritise ECM with provider ID 1234 on
# on any CAID and service

#P: 0200 # prioritise CAID 0200

#P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only

#M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with
# CAID 0500

#D: 0600 200 # wait 200 ms before writing CW for CAID 0600

I: :1880 # ignore provider ID 654321 for every CAID and
# service

#I: 0 # ignore every CAID that was not handled before

#L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal) "

- reader send ECM
- dvbapi online
- no image

Or else there is the problem
Sorry my English