Jump to content


Photo

Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit


  • Please log in to reply
2062 replies to this topic

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #561 casacristo

  • Member
  • 30 posts

0
Neutral

Posted 14 March 2012 - 18:18

and this is the log trying to launch it with xshm (same green screen crash on start up)

cd /usr/local/e2/bin/
sudo /usr/local/e2/bin/enigma2 > /tmp/enigma2_log.txt 2>&1

cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto


WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!

X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted
[root@atom e2]# vim share/enigma2/xine.conf
[root@atom e2]# cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto


WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!

X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #562 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 14 March 2012 - 18:34

Hi Casacristo,

Are any other devs besides you working on the openplipc code?


Unfortunately not. Nobody9 disappeared.

and this is the log trying to launch it with xshm (same green screen crash on start up)

cd /usr/local/e2/bin/
sudo /usr/local/e2/bin/enigma2 > /tmp/enigma2_log.txt 2>&1

cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto
 
 
WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!
 
X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted
[root@atom e2]# vim share/enigma2/xine.conf
[root@atom e2]# cat /tmp/enigma2_log.txt
/dev/fb0: No such file or directory
PYTHONPATH: /usr/local/e2/lib/enigma2/python
Display resolution 1920 1080
XINE-LIB version: 1.2.1openpliPC-e2
configfile  /usr/local/e2/share/enigma2/xine.conf
use vo_driver: xshm
use ao_driver: auto
 
 
WARNING: current display depth is 24. For better performance
a depth of 16 bpp is recommended!
 
X11OSD: MMX OSD scaling active
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
input_bluray: (bluray_class_get_instance:1446) bluray_class_get_instance
xine: found input plugin  : file input plugin
ebml: invalid EBML ID size (0x0) at position 1
ebml: Invalid EBML length size (0x0) at position 2
ebml: invalid master element
demux_dts: unsupported DTS stream type, or not a DTS stream
xine: found demuxer plugin: Elementary MPEG stream demux plugin
setResolution 720 576
XNextEvent 19
XNextEvent 12
adapter0/demux0: reset stateXNextEvent 99
XNextEvent 14
XNextEvent 99
Event Received!
executing main
Event Received!
XNextEvent 14
XNextEvent 99
setResolution 1280 720
FATAL:  failed: Operation not permitted


Do you have the same problems when you are using master branch?
It seems that you are not using default skin. Please try with default skin.

The problem is that I don't know which operation is not permitted: "FATAL: failed: Operation not permitted"

I think that you're using the new parameters in the settings file (config.pc.initial_window_width and ... height). Please comment them out or delete them.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #563 casacristo

  • Member
  • 30 posts

0
Neutral

Posted 14 March 2012 - 19:26

The problem is that this is a new pc and the master branch never compiled right.
the error logs you see are with a bran new installation of enigma2, no config or settings modified.
Note that it detects 1920x1080 although I have not specified it in the settings file.
Also the skin is the default one as I never get a chance to change anything.

Perhaps if I could start it with the PLi-HD skin I would by-pass the green screen

Can somebody point out the file and line to modify to achieve this?




Do you have the same problems when you are using master branch?
It seems that you are not using default skin. Please try with default skin.

The problem is that I don't know which operation is not permitted: "FATAL: failed: Operation not permitted"

I think that you're using the new parameters in the settings file (config.pc.initial_window_width and ... height). Please comment them out or delete them.

Regards,
Betacentauri



Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #564 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 14 March 2012 - 19:35

Hi casacristo,

you're using another skin. I see 2 lines in your log:
setResolution 720 576
setResolution 1280 720

This is not normal. With default skin you should see this:
setResolution 720 576
setResolution 720 576

Please rename or delete /usr/local/e2 directory.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #565 kerven

  • Senior Member
  • 52 posts

+1
Neutral

Posted 15 March 2012 - 15:45

"Please use build_openpwebif.sh skript in main directory. After e2 restart you can use openwebinf. Only browse to localhost."

"betacentauri' thank you for your reply ..
I am on virtualbox .. openpliPC + vtuner.. + PLI-HD ( no skin pli-hd old) work extra.
when you say "main directory", as root you mean ..?

do not work root or no root ..
when openwebif is ok.. is there a / proc / stb / info / model ( cat /proc / stb / info / model ) ?, I have nothing ..

thank you

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #566 Mr Cool Span

  • Member
  • 16 posts

0
Neutral

Posted 15 March 2012 - 17:06

im sorry to ask this but how do i get the osd vertion ?
i know how to get the master git clone https://github.com/n...9/openpliPC.git
but then wat?
1*DB 800 HD 1*DB 7000s 32 mb 1*Db7020si, and one multimediapc whit enigma2pc and openplipc, Wavefrontier Toroidal 90 9 lmb's DiSEqC 10/1

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #567 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 15 March 2012 - 19:24

im sorry to ask this but how do i get the osd vertion ?
i know how to get the master git clone https://github.com/n...9/openpliPC.git
but then wat?


Hi,

you don't need the osd branch any longer.
Nevertheless you can change the branch using "git checkout osd" (and back with "git checkout master"). With "git branch" you can see which branch you are currently using (it's the one with the star).

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #568 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 15 March 2012 - 19:34

"Please use build_openpwebif.sh skript in main directory. After e2 restart you can use openwebinf. Only browse to localhost."

"betacentauri' thank you for your reply ..
I am on virtualbox .. openpliPC + vtuner.. + PLI-HD ( no skin pli-hd old) work extra.
when you say "main directory", as root you mean ..?

do not work root or no root ..
when openwebif is ok.. is there a / proc / stb / info / model ( cat /proc / stb / info / model ) ?, I have nothing ..

thank you


Hi Kerven,

please do the following:[list]
[*]change to openpliPC directory
[*]run build_openpwebif.sh script (if you aren't using /usr/local/e2 directory please adjust INSTALL_E2PDIR in the script)
[*]run e2bin or enigma2 binary
[*]please don't stop E2 and open webbrowser and goto http://localhost
[/list]
I can see the webinterface in the webbrowser. Perhaps not everything (e.g. streaming) works. I haven't tested it yet.

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #569 Mr Cool Span

  • Member
  • 16 posts

0
Neutral

Posted 15 March 2012 - 19:51


im sorry to ask this but how do i get the osd vertion ?
i know how to get the master git clone https://github.com/n...9/openpliPC.git
but then wat?


Hi,

you don't need the osd branch any longer.
Nevertheless you can change the branch using "git checkout osd" (and back with "git checkout master"). With "git branch" you can see which branch you are currently using (it's the one with the star).

Regards,
Betacentauri

ahh okay thanks
so if i like to build whit old xine lib i then do git checkout old_xine_lib and then run the installer script
1*DB 800 HD 1*DB 7000s 32 mb 1*Db7020si, and one multimediapc whit enigma2pc and openplipc, Wavefrontier Toroidal 90 9 lmb's DiSEqC 10/1

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #570 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 15 March 2012 - 20:17

ahh okay thanks
so if i like to build whit old xine lib i then do git checkout old_xine_lib and then run the installer script


Yes, building should work. But if you have build a newer xine-lib before, then (I think!) always the newer lib is used. You can see in log which xine-lib version is used. To avoid this you'll have to delete the newer xine-lib version (libxine* files in /usr/lib and /usr/lib/xine/plugins/ directories).

Edited by betacentauri, 15 March 2012 - 20:18.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #571 behnam

  • Member
  • 6 posts

0
Neutral

Posted 16 March 2012 - 02:52

HI
I have DVB card skystar usb 2 HD CI
Every time i restart pc the device change and i have error in enigma2 for tuner
what can i do for divice of dvb card become same was befor the restart?
Thanks

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #572 mplinux

  • Member
  • 1 posts

0
Neutral

Posted 16 March 2012 - 07:52

How can I add cccam or oscam softcams in openpli enigma2pc? and where can i add these files? thanks all reply

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #573 samsherwani

  • Member
  • 1 posts

0
Neutral

Posted 16 March 2012 - 10:25

hi, I compiled and installed openplipc but i have a some problem installing .ipk packages , there is no ipkg utility iin my pc installed how can I install ipk files ?

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #574 MURATSPLAT

  • Member
  • 2 posts

0
Neutral

Posted 16 March 2012 - 18:16

My qvdpautest Result
qvdpautest 0.5.1
AMD Phenom(tm) II X4 945 Processor
NVIDIA GPU GeForce GT 430 (GF108) at PCI:1:0:0 (GPU-0)
VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library  295.20  Mon Feb  6 21:33:24 PST 2012
SURFACE GET BITS: 1112.17 M/s
SURFACE PUT BITS: 1137.82 M/s
MPEG DECODING (1920x1080): 106 frames/s
MPEG DECODING (1280x720): 190 frames/s
H264 DECODING (1920x1080): 65 frames/s
H264 DECODING (1280x720): 136 frames/s
VC1 DECODING (1440x1080): 77 frames/s
MPEG4 DECODING (1920x1080): 72 frames/s
MIXER WEAVE (1920x1080): 231 frames/s
MIXER BOB (1920x1080): 319 fields/s
MIXER TEMPORAL (1920x1080): 136 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 116 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 172 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 70 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 62 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 78 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 206 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 134 fields/s
MULTITHREADED MPEG DECODING (1920x1080): 106 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 137 fields/s

Ubuntu 11.10 64bit

Edited by MURATSPLAT, 16 March 2012 - 18:17.


Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #575 casacristo

  • Member
  • 30 posts

0
Neutral

Posted 16 March 2012 - 18:23

cccam under /var/bin and simply edit your enigma2.sh script to add a line such as /var/bin/cccam before the enigma2 line.
you will also need to modprobe the dvbsofwareca module (so have another line before /var/bin/CCcam that reads:
modprobe dvbsoftwareca
if that fails then insmod /path_to_dvbsoftwareca/dvbsoftwareca.ko

How can I add cccam or oscam softcams in openpli enigma2pc? and where can i add these files? thanks all reply



Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #576 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 March 2012 - 20:49

cccam under /var/bin and simply edit your enigma2.sh script to add a line such as /var/bin/cccam before the enigma2 line.
you will also need to modprobe the dvbsofwareca module (so have another line before /var/bin/CCcam that reads:
modprobe dvbsoftwareca
if that fails then insmod /path_to_dvbsoftwareca/dvbsoftwareca.ko


How can I add cccam or oscam softcams in openpli enigma2pc? and where can i add these files? thanks all reply


In addition you'll have to build the kernel module manually first.
cd enigma2/dvbsoftwareca
make

Regards,
Betacentauri
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #577 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 March 2012 - 20:56

HI
I have DVB card skystar usb 2 HD CI
Every time i restart pc the device change and i have error in enigma2 for tuner
what can i do for divice of dvb card become same was befor the restart?
Thanks


I think you need a udev rule for that. Try to find something in the internet. Haven't done that before. So I can't help.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #578 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 March 2012 - 21:10

hi, I compiled and installed openplipc but i have a some problem installing .ipk packages , there is no ipkg utility iin my pc installed how can I install ipk files ?


The others can prove me wrong. I think it's currently not possible to install ipk packages automatically. It should be possible to extract the files with ar. But it could be that they nevertheless don't work because openpliPC is using a different directory structure, CPU,.... At best source code is available, so that it is possible to adjust things.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #579 temporary

  • Member
  • 8 posts

0
Neutral

Posted 16 March 2012 - 21:11

Hi all,

I have TBS6984 quad dvb-s2 tuner and I'm trying configure nim_sockets for using only tuner2. I readed some old posts and configured nim_sockets file but only first dvb-s2 tuner is working. May I ask someone for help? Thank you.

There is list of dvb devices:

$ ls /dev/dvb/
adapter0 adapter1 adapter2 adapter3

And my nim_sockets

NIM Socket 0:
Type: DVB-S2
Name: TUNER1
Has_Outputs: no
Frontend_Device: 1

Re: Build Script for Openpli Enigma2 on Ubuntu 10.4 32 Bit #580 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 March 2012 - 21:28

Hi all,

I have TBS6984 quad dvb-s2 tuner and I'm trying configure nim_sockets for using only tuner2. I readed some old posts and configured nim_sockets file but only first dvb-s2 tuner is working. May I ask someone for help? Thank you.

There is list of dvb devices:

$ ls /dev/dvb/
adapter0 adapter1 adapter2 adapter3

And my nim_sockets

NIM Socket 0:
Type: DVB-S2
Name: TUNER1
Has_Outputs: no
Frontend_Device: 1


Hi,

do I understand you right, that you only want to use tuner2 and not 2 tuners?

If you want to use 2 tuners then you'll have to add a second entry. Something like this:

NIM Socket 0:
  Type: DVB-S2
  Name: T1
  Has_Outputs: no
  Frontend_Device: 0
 
NIM Socket 0:
  Type:DVB-S2
  Name: T2
  Has_Outputs: no
  Frontend_Device: 1

If you only want to use tuner2, I currently don't know a solution. Did you try this:
NIM Socket 1:
	    Type: DVB-S2
	    Name: TUNER1
	    Has_Outputs: no
	    Frontend_Device: 1

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04


4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users