2062 replies to this topic

[Dimitrij]

please help

configure: error: Package requirements (freetype2 fribidi gstreamer-0.10 gstreamer-pbutils-0.10 libdvbsi++ libpng libxml-2.0 sigc++-2.0 libssl libcrypto) were not met:
| 
| No package 'sigc++-2.0' found
| 
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
| 
| Alternatively, you may set the environment variables BASE_CFLAGS
| and BASE_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| Configure failed. The contents of all config.log files follows to aid debugging

[foxbob]

Package 'sigc++-2.0' added in branch-develop,and no package in branch-master.

[1455]

I'm finished patch enigma2-git f3a0902d (2016-01-01) for PC. Please completely remove old libs and run scrips.

Edited by 1455, 26 May 2017 - 00:28.

[Dimitrij]

Package 'sigc++-2.0' added in branch-develop,and no package in branch-master.

Build enigma2 develop

[Pirm0kas]

download Enigma2pc-mod-1455

 

Can anyone reupload the archive? It's been giving a 404 error for a while now.

[Pirm0kas]

Nevermind, found the working up-to-date link. Countless hours of playing around, here I come.

 

P.S. Going to come back here for some questions, I'm sure

[1455]

I hope that the patch will help to solution the problems. So, I'm waiting for help.

 

Current issues:
1. When using HVR4000 cards, calling SatFinder or PoitionerSetup calls frontend1, rather than frontend0, as intended.
In SatFinder, you can change the card HVR4000 with the right-left arrows and then the signal appears, but the call to PoitionerSetup have crash.
2. Teletext / subtitles don't work through the framebuffer. Most likely, because xine can' t work simultaneously with two types of video decoders.
3. After zapping 4K stream and then switching to a normal channel, the video is destroyed (it is not clear whether the buffering or synchronization). It is better to remove such channels.
4. Often the output is written the cut off crash log, because the program for some reason is killed by system.
5. The sound disappears on channels with low video and audioo bitrate (dialers, shops on the couch, etc.).
6. Timeshift doesn't work as would like.
7. The streamserver doesn't work.
8. Radio programs stutter.

[Mounir67]

I hope that the patch will help to solution the problems. So, I'm waiting for help.

 

Current issues:
1. When using HVR4000 cards, calling SatFinder or PoitionerSetup calls frontend1, rather than frontend0, as intended.
In SatFinder, you can change the card HVR4000 with the right-left arrows and then the signal appears, but the call to PoitionerSetup have crash.
2. Teletext / subtitles don't work through the framebuffer. Most likely, because xine can' t work simultaneously with two types of video decoders.
3. After zapping 4K stream and then switching to a normal channel, the video is destroyed (it is not clear whether the buffering or synchronization). It is better to remove such channels.
4. Often the output is written the cut off crash log, because the program for some reason is killed by system.
5. The sound disappears on channels with low video and audioo bitrate (dialers, shops on the couch, etc.).
6. Timeshift doesn't work as would like.
7. The streamserver doesn't work.
8. Radio programs stutter.

thank you for your great help ...

just a little question : multistream is supported on this version ??

[Pirm0kas]

Nvidia GTX960 is my videocard.

I change, but the same. Now I put git enigma2 from raider and with video.driver: auto I have this error;

 

waiting for gRC thread shutdown
gRC thread has finished
- (9) Font Render Class
- (9) gLCDDC
- (9) gXlibDC
thread joined 0
Unloading post plugins
-------
Segmentation fault (core dumped)
 

 

With opengl I have this error:

 

use vo_driver: opengl
use ao_driver: alsa
video_out_opengl: Testing for hardware accelerated direct rendering visual
video_out_opengl: Didn't find any
I'm unable to initialize 'opengl' video driver. Giving up.
setResolution 720 576
Segmentation fault (core dumped)
 

 

I'm experiencing the same on Ubuntu 16.04 with GT720. Nvidia 375 drivers are installed. Trying to run sudo ./e2bin from latest 1455's build and it segfaults.

 

No matter what video mode is set in xine.conf, e2 instantly crashes when tried to be run with sudo. Without sudo it spits out a lot of FLUSH events and then also kills itself.

 

Any tips on how to get it to run? Or should I just try reinstalling Ubuntu first?

[1455]

Use only nvidia vdpau for GTX960.

[Pirm0kas]

I did... dmesg is full of these errors:

 

enigma2[3540]: segfault at 8 ip 00007fae97f65cd5 sp 00007ffd696367a0 error 4 in libxine.so.2.6.1[7fae97f30000+87000]

[1455]

Use only nvidia vdpau for GTX960 or GT720.

 

In the folder enigma2pc:

1. ulimit -c unlimited

 

2. Run:

./e2bin

 

3. Then:

gdb e2bin core

bt full

thread apply all bt

 

4. Post here.

[1455]

Make shure to remove libxine from the repositories and use the internal patched 1.2.8.

Edited by 1455, 26 May 2017 - 21:59.

[Pirm0kas]

Use only nvidia vdpau for GTX960 or GT720.

 

In the folder enigma2pc:

1. ulimit -c unlimited

 

2. Run:

./e2bin

 

3. Then:

gdb e2bin core

bt full

thread apply all bt

 

4. Post here.

(gdb) bt full
#0  __GI___pthread_mutex_lock (mutex=0x20) at ../nptl/pthread_mutex_lock.c:67
        __PRETTY_FUNCTION__ = "__pthread_mutex_lock"
        type = <optimized out>
        id = <optimized out>
#1  0x0000000000534ae2 in gRC::submit(gOpcode const&) ()
No symbol table info available.
#2  0x0000000000535aa0 in gPainter::resetOffset() ()
No symbol table info available.
#3  0x000000000047b1dc in ?? ()
No symbol table info available.
#4  <signal handler called>
No locals.
#5  0x0000000000d46830 in ?? ()
No symbol table info available.
#6  0x00007fa724d67071 in audio_decoder_loop (stream_gen=0xd1f0d0)
    at audio_decoder.c:134
        num_bufs = <optimized out>
        num_streams = <optimized out>
        buf = <optimized out>
        first_header = 0x0
        last_header = 0x0
        replaying_headers = <optimized out>
        stream = 0xd1f0d0
---Type <return> to continue, or q <return> to quit---
        running_ticket = <optimized out>
        running = 1
        prof_audio_decode = -1
        buftype_unknown = 0
        audio_channel_user = -1
#7  0x00007fa7228c36ba in start_thread (arg=0x7fa70bfff700)
    at pthread_create.c:333
        __res = <optimized out>
        pd = 0x7fa70bfff700
        now = <optimized out>
        unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140355437590272,
                8145204736851861423, 0, 140726165238543, 140355437590976,
                13364160, -8194436469991776337, -8194350554833985617},
              mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0},
            data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
        not_first_call = <optimized out>
        pagesize_m1 = <optimized out>
        sp = <optimized out>
        freesize = <optimized out>
        __PRETTY_FUNCTION__ = "start_thread"
#8  0x00007fa7225f982d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
No locals.

and

Thread 6 (Thread 0x7fa710a28700 (LWP 5192)):
#0  pthread_cond_timedwait@@GLIBC_2.3.2 ()
    at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225
#1  0x00007fa724d65e04 in video_decoder_loop (stream_gen=0xd1f0d0)
    at video_decoder.c:264
#2  0x00007fa7228c36ba in start_thread (arg=0x7fa710a28700)
    at pthread_create.c:333
#3  0x00007fa7225f982d in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 5 (Thread 0x7fa726d3f7c0 (LWP 5186)):
#0  0x00007fa7228c498d in pthread_join (threadid=140355437590272,
    thread_return=thread_return@entry=0x7ffd5d16f650) at pthread_join.c:90
#1  0x00007fa724d67a84 in _x_audio_decoder_shutdown (
    stream=stream@entry=0xd1f0d0) at audio_decoder.c:544
#2  0x00007fa724d54ae2 in xine_dispose (stream=0xd1f0d0) at xine.c:1683
#3  0x0000000000549eff in cXineLib::~cXineLib() ()
#4  0x0000000000549ff9 in cXineLib::~cXineLib() ()
#5  0x00000000005458d4 in gXlibDC::~gXlibDC() ()
#6  0x0000000000545a29 in gXlibDC::~gXlibDC() ()
#7  0x00000000005475a3 in eAutoInitPtr<gXlibDC>::closeNow() ()
#8  0x000000000048b1cf in eInit::setRunlevel(int) ()
---Type <return> to continue, or q <return> to quit---
#9  0x000000000048b200 in eInit::~eInit() ()
#10 0x000000000047caf2 in eMain::~eMain() ()
#11 0x000000000047908f in main ()

Thread 4 (Thread 0x7fa711627700 (LWP 5191)):
#0  pthread_cond_wait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1  0x00007fa724d70922 in ao_out_fifo_get (buf=0x0, this=0xcbebc0) at audio_out.c:558
#2  ao_loop (this_gen=0xcbebc0) at audio_out.c:1193
#3  0x00007fa7228c36ba in start_thread (arg=0x7fa711627700) at pthread_create.c:333
#4  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 3 (Thread 0x7fa715e29700 (LWP 5190)):
#0  0x00007fa7225edb5d in poll () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007fa71c20a861 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#2  0x00007fa71c1fbe11 in pa_mainloop_poll () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#3  0x00007fa71c1fc4ae in pa_mainloop_iterate () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#4  0x00007fa71c1fc560 in pa_mainloop_run () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#5  0x00007fa71c20a7a9 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#6  0x00007fa7179c4078 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-8.0.so
#7  0x00007fa7228c36ba in start_thread (arg=0x7fa715e29700) at pthread_create.c:333
#8  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 2 (Thread 0x7fa71cc28700 (LWP 5189)):
#0  pthread_cond_timedwait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225
#1  0x00007fa724d6a52e in video_out_loop (this_gen=0xca8040) at video_out.c:1921
#2  0x00007fa7228c36ba in start_thread (arg=0x7fa71cc28700) at pthread_create.c:333
#3  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 1 (Thread 0x7fa70bfff700 (LWP 5193)):
#0  __GI___pthread_mutex_lock (mutex=0x20) at ../nptl/pthread_mutex_lock.c:67
#1  0x0000000000534ae2 in gRC::submit(gOpcode const&) ()
#2  0x0000000000535aa0 in gPainter::resetOffset() ()
#3  0x000000000047b1dc in ?? ()
#4  <signal handler called>
#5  0x0000000000d46830 in ?? ()
#6  0x00007fa724d67071 in audio_decoder_loop (stream_gen=0xd1f0d0) at audio_decoder.c:134
#7  0x00007fa7228c36ba in start_thread (arg=0x7fa70bfff700) at pthread_create.c:333
#8  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

[Pirm0kas]

Make shure to remove libxine from the repositories and use the internal patched 1.2.8.

 

[1455]

Hmmm... Try nvidia-340 and libxine from milaebrothers

[Pirm0kas]

Hmmm... Try nvidia-340 and libxine from milaebrothers

 

Unfortunately still no luck. I've tried using your E2PC from friday's release, nvidia-340 from ppa:graphics-drivers/ppa and also compiled lib-xine from milaebrothers' git.

warning: core file may not match specified executable file.
[New LWP 5193]
[New LWP 5189]
[New LWP 5190]
[New LWP 5191]
[New LWP 5186]
[New LWP 5192]

warning: .dynamic section for "/usr/lib/vdpau/libvdpau_nvidia.so.1" is not at the expected address (wrong library or version mismatch?)
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `./e2bin'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0  __GI___pthread_mutex_lock (mutex=0x20) at ../nptl/pthread_mutex_lock.c:67
67	../nptl/pthread_mutex_lock.c: No such file or directory.
[Current thread is 1 (Thread 0x7fa70bfff700 (LWP 5193))]
(gdb) thread apply bt all
Invalid thread ID: bt all
(gdb) thread apply all b

Thread 6 (Thread 0x7fa710a28700 (LWP 5192)):
Breakpoint 1 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.

Thread 5 (Thread 0x7fa726d3f7c0 (LWP 5186)):
Note: breakpoint 1 also set at pc 0x7fa7228c5d44.
Breakpoint 2 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.

Thread 4 (Thread 0x7fa711627700 (LWP 5191)):
Note: breakpoints 1 and 2 also set at pc 0x7fa7228c5d44.
Breakpoint 3 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.

Thread 3 (Thread 0x7fa715e29700 (LWP 5190)):
Note: breakpoints 1, 2 and 3 also set at pc 0x7fa7228c5d44.
Breakpoint 4 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.

Thread 2 (Thread 0x7fa71cc28700 (LWP 5189)):
Note: breakpoints 1, 2, 3 and 4 also set at pc 0x7fa7228c5d44.
Breakpoint 5 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.

Thread 1 (Thread 0x7fa70bfff700 (LWP 5193)):
Note: breakpoints 1, 2, 3, 4 and 5 also set at pc 0x7fa7228c5d44.
Breakpoint 6 at 0x7fa7228c5d44: file ../nptl/pthread_mutex_lock.c, line 67.
(gdb) thread apply all bt

Thread 6 (Thread 0x7fa710a28700 (LWP 5192)):
#0  pthread_cond_timedwait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225
#1  0x00007fa724d65e04 in video_decoder_loop (stream_gen=0xd1f0d0) at video_decoder.c:264
#2  0x00007fa7228c36ba in start_thread (arg=0x7fa710a28700) at pthread_create.c:333
#3  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 5 (Thread 0x7fa726d3f7c0 (LWP 5186)):
#0  0x00007fa7228c498d in pthread_join (threadid=140355437590272, thread_return=thread_return@entry=0x7ffd5d16f650) at pthread_join.c:90
#1  0x00007fa724d67a84 in _x_audio_decoder_shutdown (stream=stream@entry=0xd1f0d0) at audio_decoder.c:544
#2  0x00007fa724d54ae2 in xine_dispose (stream=0xd1f0d0) at xine.c:1683
#3  0x0000000000549eff in cXineLib::~cXineLib() ()
#4  0x0000000000549ff9 in cXineLib::~cXineLib() ()
#5  0x00000000005458d4 in gXlibDC::~gXlibDC() ()
#6  0x0000000000545a29 in gXlibDC::~gXlibDC() ()
#7  0x00000000005475a3 in eAutoInitPtr<gXlibDC>::closeNow() ()
#8  0x000000000048b1cf in eInit::setRunlevel(int) ()
#9  0x000000000048b200 in eInit::~eInit() ()
#10 0x000000000047caf2 in eMain::~eMain() ()
#11 0x000000000047908f in main ()

Thread 4 (Thread 0x7fa711627700 (LWP 5191)):
#0  pthread_cond_wait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1  0x00007fa724d70922 in ao_out_fifo_get (buf=0x0, this=0xcbebc0) at audio_out.c:558
#2  ao_loop (this_gen=0xcbebc0) at audio_out.c:1193
#3  0x00007fa7228c36ba in start_thread (arg=0x7fa711627700) at pthread_create.c:333
#4  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 3 (Thread 0x7fa715e29700 (LWP 5190)):
#0  0x00007fa7225edb5d in poll () at ../sysdeps/unix/syscall-template.S:84
#1  0x00007fa71c20a861 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#2  0x00007fa71c1fbe11 in pa_mainloop_poll () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#3  0x00007fa71c1fc4ae in pa_mainloop_iterate () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#4  0x00007fa71c1fc560 in pa_mainloop_run () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#5  0x00007fa71c20a7a9 in ?? () from /usr/lib/x86_64-linux-gnu/libpulse.so.0
#6  0x00007fa7179c4078 in ?? () from /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-8.0.so
#7  0x00007fa7228c36ba in start_thread (arg=0x7fa715e29700) at pthread_create.c:333
#8  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 2 (Thread 0x7fa71cc28700 (LWP 5189)):
#0  pthread_cond_timedwait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225
#1  0x00007fa724d6a52e in video_out_loop (this_gen=0xca8040) at video_out.c:1921
#2  0x00007fa7228c36ba in start_thread (arg=0x7fa71cc28700) at pthread_create.c:333
#3  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109

Thread 1 (Thread 0x7fa70bfff700 (LWP 5193)):
#0  __GI___pthread_mutex_lock (mutex=0x20) at ../nptl/pthread_mutex_lock.c:67
#1  0x0000000000534ae2 in gRC::submit(gOpcode const&) ()
#2  0x0000000000535aa0 in gPainter::resetOffset() ()
#3  0x000000000047b1dc in ?? ()
#4  <signal handler called>
#5  0x0000000000d46830 in ?? ()
#6  0x00007fa724d67071 in audio_decoder_loop (stream_gen=0xd1f0d0) at audio_decoder.c:134
#7  0x00007fa7228c36ba in start_thread (arg=0x7fa70bfff700) at pthread_create.c:333
#8  0x00007fa7225f982d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) quit

What do next? Should I just stop wasting time and reinstall 16.04 and then try your newest release?

Edited by Pirm0kas, 28 May 2017 - 20:09.

[Pirm0kas]

Another question: does OpenpliPC support IPTV streams from bouqets? That is, via 1:0:0... or 4097:0:0... references?

[1455]

Mounir67, the stream server is disabled.

Pirm0kas, I have a fast flash usb 3.0 and I try e2pc on it. There's 16.04 x86_64 and nothing more. The script is fully functional. You most likely have a hardware or BIOS problem. I also advise you to make a complete memory test. No errors are allowed. I had one with an error and the computer often threw out programs or hung.

[Pirm0kas]

Pirm0kas, I have a fast flash usb 3.0 and I try e2pc on it. There's 16.04 x86_64 and nothing more. The script is fully functional. You most likely have a hardware or BIOS problem. I also advise you to make a complete memory test. No errors are allowed. I had one with an error and the computer often threw out programs or hung.

 

OK, I'll try reinstalling and see how it goes from there.

 

What about IPTV streams in bouqets though... Are they supported just like on regular receivers? I tried OpenPCTV and some other distro with old Enigma2PC -- they didn't support them sadly.