2062 replies to this topic

[Shadowman94]

So im checked your updated version.

 

1. the problem with xine patch, after u apply patch for xineintl.h, autoconfig regenerate this file, so maybe need to patch autoconfig file.

2. library installation isnt completed, beacuse need to install these libs with properly order, its better to write all package name, instead of dpkg -i *.deb

 

Here is my kernel log, so u see, it works. :-D

Jul 21 08:39:20 shadowman-kubuntu kernel: [    0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-11) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #32-Ubuntu SMP Fri Jun 30 05:32:18 UTC 2017 (Ubuntu 4.10.0-28.32-generic 4.10.17)

Jul 21 09:23:52 shadowman-kubuntu kernel: [ 2681.837751] /home/shadowman/enigma2pc-RC4-hevc/enigma2/dvbsoftwareca/dvb_softwareca.c: frontend loopback driver v0.0.1

Jul 21 09:23:52 shadowman-kubuntu kernel: [ 2681.837752] dvbsoftwareca: registering adapters

Jul 21 09:23:52 shadowman-kubuntu kernel: [ 2681.837823] dvbsoftwareca: register adapter0/ca0 @ minor: 0000

Jul 21 09:23:52 shadowman-kubuntu kernel: [ 2681.837823] dvbsoftwareca: registered CA0 device for adapter0

Jul 21 09:23:52 shadowman-kubuntu kernel: [ 2681.837884] dvbsoftwareca: registered 1 CA devices

Jul 21 09:24:09 shadowman-kubuntu kernel: [ 2698.976592] reply_ca xxxxxxxxx

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974521] cactl CA_SET_PID 0XXX index -1

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974540] cactl CA_SET_PID 0XXX index 0

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974544] cactl CA_SET_PID 0XXX index -1

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974546] cactl CA_SET_PID 0XXX index 0

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974549] cactl CA_SET_DESCR par 0 idx 0 56...34

Jul 21 09:24:34 shadowman-kubuntu kernel: [ 2723.974557] cactl CA_SET_DESCR par 1 idx 0 2B...FE

Jul 21 09:24:42 shadowman-kubuntu kernel: [ 2731.548671] cactl CA_SET_DESCR par 1 idx 0 C5...31

Jul 21 09:24:52 shadowman-kubuntu kernel: [ 2741.488579] cactl CA_SET_DESCR par 0 idx 0 EC...77

Jul 21 09:25:03 shadowman-kubuntu kernel: [ 2751.896898] cactl CA_SET_DESCR par 1 idx 0 1F...82

Edited by Shadowman94, 21 July 2017 - 08:37.

[1455]

Thanks. I trust you.  

I tried on an old computer with a HVR-4000 card. At the same time, new e2pc works well on 14.04 and 16.04 including this old computer.
There is a suspicion that support for this dvb card is broken in the new kernels (?). I'll tell you later how the problem was solved.

However, after installing the libxine, I see the modified file xineintl.h. About *.dpkg I understood. In this case, it re-installs the other packages.

Now I think how to fix teletext.

[1455]

I think I guess what's wrong! Our guys reworked ca_netlink.c to support several dvb cards. HVR-4000 exactly 2 cards (S2/T) in one.

[Shadowman94]

what is your dvb card adapter id in /dev?

[1455]

-ca0

-demux0

@demux1 (symlink)

-dvr0

@dvr1 (symlink)

-frontend0

-frontend1

-net0

-net1

 

S2 = 0

T = 1

Edited by 1455, 21 July 2017 - 10:36.

[Shadowman94]

And T tuner doesnt have dvr and demux0? i think this card working different than single tuner, cuz "ca0, demux1, dvr1" is created by dvbsoftwareca, maybe this hybrid card need other identites,

but i dont have other hybrid card, only skystar 2 and hd2, so i cant test this. However the modification what im done, its only use new kernel function. 

Maybe ( again ) the code is determine worng adapter id.

Can u send me oscam and kernel log in pm?

[1455]

Sorry, in 17.04 with your patch:

-ca0

-demux0

-demux1

-dvr0

-dvr1

-frontend0

-frontend1

-net0

-net1

 

And as it was before, when it worked on 16.04:

-ca0

-demux0

@demux1 (symlink)

-dvr0

@dvr1 (symlink)

-frontend0

-frontend1

-net0

-net1

[1455]

Everything worked! Do not ask me how I did it. I just got old, I guess.

[Shadowman94]

Everything worked! Do not ask me how I did it. I just got old, I guess.

It's magic! :-D

 

Btw, any idea why screen is tearing with all nvidia driver?

Edited by Shadowman94, 21 July 2017 - 16:21.

[1455]

If you mean horizontal kinks, then:

xorg.conf

Section "Extensions"
Option "Composite" "Disable"
EndSection

Also I noticed that in 17.04 there was no /dev/fb0. Strange.

[1455]

I also noticed that sometimes on nvidia drivers half of the screen is closed by some black squares. It helps only a cold restart.

[1455]

Due to missing /dev/fb0, subtitles not working and enigma have crash if it enabled.

Edited by 1455, 21 July 2017 - 16:48.

[Shadowman94]

I also noticed that sometimes on nvidia drivers half of the screen is closed by some black squares. It helps only a cold restart.

 

I turned on option for "Force Full Composition Pipeline" in NVIDIA X Server Settings for all monitor and now tearing is disapeared.

AAAND, I have 3 monitor connected to GPU ( GTX 960 G1 GAMING ) DVI-I, DVI-D and HDMI. and one monitor to iGPU with hdmi.

When i start enigma2pc the monitor wich connected to iGPU is turning off, and display enigma informations, like front LCD panel in stbox... wtf is that?

[Shadowman94]

Due to missing /dev/fb0, subtitles not working and enigma have crash if it enabled.

 

I dont know how but i have /dev/fb0 and fb1 :/

[1455]

I fixed the my frame buffer /dev/fb0. For me helped here. I'm amazed by Ubuntu. How developers do this?   

[1455]

I completely merged e2pc with the 1bcd664d branch as much as possible. Before installing, need completely delete the e2 folder. This uses sigc++-1.2 because we need to rework in particular xineLib.cpp. I tried 2.0, but not succeed.
There is much new and I don't like everything, but it is supplied "as is".
The archive is called "enigma2pc-RC5-hevc.tar.bz2"

[Shadowman94]

I completely merged e2pc with the 1bcd664d branch as much as possible. Before installing, need completely delete the e2 folder. This uses sigc++-1.2 because we need to rework in particular xineLib.cpp. I tried 2.0, but not succeed.
There is much new and I don't like everything, but it is supplied "as is".
The archive is called "enigma2pc-RC5-hevc.tar.bz2"

 

Nice work! Any idea why enigma2 reset x-server resolution after start?

[1455]

I don't have this problem with nvidia-375. Crt monitor or tv on hdmi.
With nouveau yes. I have one display conneted.

[Shadowman94]

I don't have this problem with nvidia-375. Crt monitor or tv on hdmi.
With nouveau yes. I have one display conneted.

I installed ubuntu server 14.4.5 and xserver with nodm, it works fine, but if i start enigma2, the resolution is set to 1080p and black screen or flicked image, if i switch to tty1 and back to gui its goes back to normal resolution and works fine.

config: (dont laught)
CPU: Intel Pentium 4 3.00GHz
RAM: 1GB ddr
VGA: ati radeon 9600 pro 256mb

DVB: SkyStar 2 PCI v2.6

Edited by Shadowman94, 3 August 2017 - 19:22.

[Shadowman94]

One more thing, i upgraded OpenWebIf from git, and working fine, if want u can upgrade webif plugin in future.