2062 replies to this topic

[1455]

I am talking not about that. I got the folder /lib/i386-linux-gnu. This is acceptable for 64-bit systems, but script 1 reacted to this and install packages of both versions. For 64-bit systems, we need to check whether packages with the name *: i386 are accidentally installed.
Now script 1 using dvbmediasink branch "gst-1.0" in case 17.04. The subsink was old. Therefore, I don't delete v. 0.10. Also a little remade scripts. But the subtitles at 17.04 don't work. Crash.

[1455]

I successfully started lirc-0.9.4c-9 on the kernel 4.10 (Ubuntu 17.04) and now I can control e2pc with the 'Serial IR type home-brew'. So, if someone is interested, I can write an instruction.

[atari]

@1455 can you add yours mods to git?

tnx

[1455]

atarl, the work is almost finished. Understand correctly, if I describe every action to a rollback, every mistake, it will take a very long time.

Of course, I can, but after a while it will be another dead git repository. I'm now basically changing the patch, so you can see the difference yourself.

I just transferred what was done before me to the current state.

[atari]

i install on 2 pc on one was compile & run ok

on other i get:

(Reading database ... 420765 files and directories currently installed.)
Preparing to unpack .../libxine-e2pc_1.2.8-e2pc-1_amd64.deb ...
Unpacking libxine-e2pc (1.2.8-e2pc-1) ...
dpkg: error processing archive /opt/enigma2pc-RC5-hevc/xine-lib-1.2-vdpau/libxine-e2pc_1.2.8-e2pc-1_amd64.deb (--install):
 trying to overwrite '/usr/share/locale/sk/LC_MESSAGES/libxine2.mo', which is also in package libxine2-bin 1.2.6-1build5
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Processing triggers for xine-ui (0.99.9-1.2) ...
Updated the MIME types in xine's menu file.
Errors were encountered while processing:
 /opt/enigma2pc-RC5-hevc/xine-lib-1.2-vdpau/libxine-e2pc_1.2.8-e2pc-1_amd64.deb
it updated 16.04 64bit

[atari]

btw great job, last ime when i compile it it was lot of manual paching to make it work

is it poslible to make ver for samsing udh tv J, I see root is now working, oscam too, im not sure what is cpu inside

[Shadowman94]

@atari

You need to manual remove old libxine package first, after u can install new.

Edited by Shadowman94, 18 August 2017 - 22:12.

[Shadowman94]

I successfully started lirc-0.9.4c-9 on the kernel 4.10 (Ubuntu 17.04) and now I can control e2pc with the 'Serial IR type home-brew'. So, if someone is interested, I can write an instruction.

Great job! It would be great if u can write a short instruction, how we can install lirc on newer kernel

[atari]

@shadowman94 tnx it worked but i get new error:

 

/opt/enigma2pc-RC5-hevc/enigma2/dvbsoftwareca/dvb_softwareca.c:239:21: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
  dvb_class->devnode = dvb_devnode;
                     ^
cc1: some warnings being treated as errors
scripts/Makefile.build:294: recipe for target '/opt/enigma2pc-RC5-hevc/enigma2/dvbsoftwareca/dvb_softwareca.o' failed
make[2]: *** [/opt/enigma2pc-RC5-hevc/enigma2/dvbsoftwareca/dvb_softwareca.o] Error 1
Makefile:1524: recipe for target '_module_/opt/enigma2pc-RC5-hevc/enigma2/dvbsoftwareca' failed
make[1]: *** [_module_/opt/enigma2pc-RC5-hevc/enigma2/dvbsoftwareca] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-32-generic'
Makefile:7: recipe for target 'default' failed
make: *** [default] Error 2

An error occured while building OpenPliPC - section dvbsoftwareca
 

[WanWizard]

The codebase is very sentitive to the version of gcc used to compile.

 

The current develop codebase compiles with gcc 5.4, newer ones will have errors like this pop up. Have a look at the pending PR https://github.com/O...e-core/pull/313 for fixes for newer gcc versions. 

[Shadowman94]

@atari

 

U need to apply my patch for 4.9+ kernels, u can found it in patches folder

[1455]

Shadowman94, there are still some problems. Unlike the old versions there are no repeats. I will be grateful if you help me understand the reason. People write that they also have this problem with version 094 but I can't  able to launch others versions.

Installaton lirc in Ubuntu 17.04 step by step.

1) Installing packages:

dpkg --remove ir-keytable
apt-get install lirc

2) Create a group and add the user:

sudo groupadd lirc
sudo usermod -aG lirc root; sg lirc lirc-setup

3) The program 'lirc-setup' does not work properly. So create a new file /etc/lirc/lirc_options.conf:

[lircd]
nodaemon        = False
driver          = default
device          = /dev/lirc0
output          = /var/run/lirc/lircd
pidfile         = /var/run/lirc/lircd.pid
plugindir       = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission      = 666
allow-simulate  = No
repeat-max      = 600
#effective-user =
#listen         = [address:]port
#connect        = host[:port]
#loglevel       = 6
#uinput         = ...
#release        = ...
#logfile        = ...

[lircmd]
uinput          = False
nodaemon        = False

[modinit]
code = /bin/setserial /dev/ttyS0 uart none; /sbin/modprobe serial_ir
code1 = /bin/setfacl -m g:lirc:rw /dev/lirc0
# code2 = ...

# [lircd-uinput]
# release-timeout = 200

4) Run the program irrecord. W: Run in a terminal the programm 'irrecord' even if you is root as sudo (!):

cd /etc/lirc/lircd.conf.d
service lircd stop
sudo irrecord -n -d /dev/lirc0 -H default MyRemote.conf

5) Delete in the resulting file all "0xFFFFFFFFFFFFFFFF" after "0x........":

  name  MyRemote
  bits           32
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9046  4440
  one           621  1614
  zero          621   495
  ptrail        619
  repeat       9044  2203
  gap          107282
  toggle_bit_mask 0x0

      begin codes
          KEY_OK                   0x08F7F807
          KEY_UP                   0x08F700FF
      end codes

end remote

6) You can use your old config from previous versions, by adding 08F7 (or what you got after irrecord) after '0x....', or use toggle_bit_mask. Or you can add the following lines (if they are not) to lead the code to the form '0x....':

  pre_data_bits   16
  pre_data       0x8F7

7) Rename unused files in the folder /etc/lirc/lircd.conf.d by add an ending '.dist'

8) Start lirc again:

service lircd start

PS. It also works with https://git.linuxtv....media_build.git.  It does not work with https://bitbucket.or...Cat/media_build.

 

[1455]

<- This is only for the 'Serial IR type home-brew' and it works after reboot.

[1455]

I'm not at home at the moment. Try this:

[lircd]
nodaemon        = False
driver          = devinput
device          = /dev/input/by-path/platform-serial_ir.0-event-ir
output          = /var/run/lirc/lircd
pidfile         = /var/run/lirc/lircd.pid
plugindir       = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission      = 666
allow-simulate  = No
repeat-max      = 100
#effective-user =
#listen         = [address:]port
#connect        = host[:port]
loglevel       = 6
#uinput         = ...
#release        = ...
logfile        = /var/log/lirc.log

[lircmd]
uinput          = False
nodaemon        = False

[modinit]
code = /bin/setserial /dev/ttyS0 uart none
code1 = /sbin/modprobe serial_ir
# selection protocol:
code2 = /bin/echo rc-5 > /sys/class/rc/rc0/protocols
#code3 = /bin/setfacl -m g:lircd:rw /dev/lirc0

# [lircd-uinput]
# release-timeout = 200

What will happen then?

[1455]

Sorry, I found a mistake!
a) apt-get install setserial
lirc_options.conf must not contain more than one space near ' = '. The correct format should be this:

# Generated by lirc-setup
[lircd]
nodaemon = False
driver = default
device = /dev/lirc0
output = /var/run/lirc/lircd
pidfile = /var/run/lirc/lircd.pid
plugindir = /usr/lib/x86_64-linux-gnu/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 100
loglevel = 6
logfile = /var/log/lirc.log

[lircmd]
uinput = False
nodaemon = False

[modinit]
code = /bin/echo lirc > /sys/class/rc/rc0/protocols
code1 = /bin/setfacl -m g:lirc:rw /dev/lirc0
code3 = /bin/setserial /dev/ttyS0 uart none; /sbin/modprobe serial_ir

Log files:
/root/.cache/irrecord.log
/root/.cache/mode2.log
/var/log/kernel.log

[1455]

Switched Enigma2pc-RC6 to sigc++-2.0 for 17.04. But the timeshift in 17.04 still does not work.

[eDVBChannel] getLength failed - can't seek relative to end!

The reason is not exactly in the core. Suspicions on python 2.7.13

[1455]

Question to the developers.
I install on 'Zesty' the patched version python-2.7.12 in a separate folder and assign it to ~/.bashrc

alias python='/usr/local/e2/bin/python2.7'

Then I enter the command

. ~/.bashrc

Checking

python -V

I also add to ./configure

LDFLAGS="-L/usr/local/e2/bin/python2.7"

Everything is going, but enigma persistently writes in config.log

result: /usr/bin/python

Similarly, if I install gcc5 and in ~/.bashrc

alias gcc='/usr/bin/gcc-5'

How to make use of these libraries not from /usr/bin but those that I want?

[1455]

If you still have not lost interest.

An interesting feature of the RC6 in Ubuntu-17.04. If you run /TESTS/VALGRIND.sh, then the timeshift and subtitles are working. I have a guess, and your opinion?

[WanWizard]

All our buildservers run Ubuntu 16.04. My own buildserver runs Fedora 26.